Datasheet> 器件分类 > 无源元件> 振荡器> 1109E85M00000BF

文档预览

1109E85M00000BF: 产品描述TTL Output Clock Oscillator, 85MHz Nom, PLASTIC, FLAT PACKAGE-16; 产品类别无源元件振荡器; 文件大小456KB，共22页; 制造商Vectron International, Inc.; 官网地址http://www.vectron.com/

下载文档详细参数全文预览

1109E85M00000BF概述

TTL Output Clock Oscillator, 85MHz Nom, PLASTIC, FLAT PACKAGE-16

1109E85M00000BF规格参数

参数名称	属性值
包装说明	PLASTIC, FLAT PACKAGE-16
Reach Compliance Code	compliant
最长下降时间	3 ns
频率调整-机械	NO
频率稳定性	50%
JESD-609代码	e4
制造商序列号	1109
安装特点	THROUGH HOLE MOUNT
标称工作频率	85 MHz
最高工作温度	125 °C
最低工作温度	-55 °C
振荡器类型	TTL
输出负载	10 TTL
物理尺寸	12.83mm x 9.78mm x 3.0mm
最长上升时间	3 ns
标称供电电压	3.3 V
表面贴装	NO
最大对称度	60/40 %
端子面层	GOLD
Base Number Matches	1

文档预览

下载PDF文档

全文
预览

REV

DESCRIPTION

CO-14428

DATE

4/30/09

PREP

DF/LT

APPD

DATE

PREPARED BY

QUALITY

ENGINEERING

VECTRON INTERNATIONAL

MOUNT HOLLY SPRINGS, PA 17065

Stan Carpenter

SWP

S. Carpenter

10/26/00

11/1/00

10/30/00

Oscillator Specification, Hybrid Clock

Hi-Rel Standard

CODE IDENT NO

SIZE

DWG. NO.

REV

00136

OS-68338

UNSPECIFIED TOLERANCES: N/A

SHEET 1 0F 20

1.1

SCOPE

General. This specification defines the design, assembly and functional evaluation of high

reliability, hybrid clock oscillators produced by Vectron International. Devices delivered to

this specification represent the standardized Parts, Materials and Processes (PMP) Program

developed, implemented and certified for advanced applications and extended environments.

Applications Overview. The designs represented by these products were primarily developed

for the MIL-Aerospace community. The lesser Design Pedigrees and Screening Options

imbedded within OS-68338 bridge the gap between Space and COTS hardware by providing

custom hardware with measures of mechanical, assembly and reliability assurance needed for

Military or Ruggedized COTS environments.

1.2

2.1

APPLICABLE DOCUMENTS

Specifications and Standards. The following specifications and standards form a part of this

document to the extent specified herein. The issue currently in effect on the date of quotation

will be the product baseline, unless otherwise specified. In the event of conflict between the

texts of any references cited herein, the text of this document shall take precedence.

Military

MIL-PRF-55310

MIL-PRF-38534

Standards

MIL-STD-202

MIL-STD-883

MIL-STD-1686

Oscillators, Crystal Controlled, General Specification For

Hybrid Microcircuits, General Specification For

Test Method Standard, Electronic and Electrical Component Parts

Test Methods and Procedures for Microelectronics

Electrostatic Discharge Control Program for Protection of Electrical and

Electronic Parts, Assemblies and Equipment

Other

HT-67849

QSP-90100

VL-65339

Test Specification, OS-68338 Hybrids, Hi-Rel Standard

Quality Systems Manual, Vectron International

Identification Common Documents, Materials and Processes, Hi-Rel XO

3.1

GENERAL REQUIREMENTS

Classification. All devices delivered to this specification are of hybrid technology conforming

to Type 1, Class 2 of MIL-PRF-55310. Primarily developed as a Class S equivalent

specification, options are imbedded within it to also produce Class B, Engineering Model and

Ruggedized COTS devices. Devices carry a Class 2 ESDS classification.

SIZE

CODE IDENT NO.

UNSPECIFIED TOLERANCES

DWG NO.

REV.

SHEET

00136

N/A

OS-68338

3.2

Item Identification. External packaging choices are of metal flatpacks, DIP’s and ceramic J-

lead 9x14mm and LCC’s with either TTL or ACMOS logic output. Unique Model Number

Series’ are utilized to identify device package configurations and output logic as listed in Table

Absolute Maximum Ratings.

a. Supply Voltage Range (V

b. Storage Temperature Range (T

STG

c. Junction Temperature (T

d. Lead Temperature (soldering, 10 seconds):

e. Output Source/Sink Current

3.3

-0.5Vdc to +7.0Vdc

-65°C to +125°C

+175°C

+300°C

±70 mA

3.4

3.4.1

Design, Parts, Materials and Processes, Assembly, Inspection and Test.

Design. The ruggedized designs implemented for these devices are proven in military and

space applications under extreme environments. Designs utilize 4-point crystal mounting in

compliment with Established Reliability (MIL-ER) componentry. When specified, radiation

hardening up to 100krad(Si) (RHA level R) can be included without altering the device’s

internal topography.

3.4.1.1 Design and Configuration Stability. Barring changes to improve performance by reselecting

passive chip component values to offset component tolerances, there will not be fundamental

changes to the design or assembly or parts, materials and processes after first product delivery

of that item without written approval from the procuring activity.

3.4.1.2 Environmental Integrity. Designs have passed the environmental qualification levels of MIL-

PRF-55310. These designs have also passed extended dynamic levels of at least:

Sine Vibration: MIL-STD-202, Method 204, Condition G (30g pk.)

Random Vibration: MIL-STD-202, Method 214, Condition II-J (43.92g rms)

Mechanical Shock: MIL-STD-202, Method 213, Condition F (1500g, 0.5ms)

3.4.2

Prohibited Parts, Materials and Processes. The items listed are prohibited for use in high

reliability devices produced to this specification.

a. Gold metallization of package elements without a barrier metal.

b. Zinc chromate as a finish.

c. Cadmium, zinc, or pure tin external or internal to the device.

d. Plastic encapsulated semiconductor devices.

e. Ultrasonically cleaned electronic parts.

f. Heterojunction Bipolar Transistor (HBT) technology.

g. ‘getter’ materials

Assembly. Manufacturing utilizes standardized procedures, processes and verification

methods to produce MIL-PRF-55310 Class S / MIL-PRF-38534 Class K equivalent devices.

MIL-PRF-38534 Group B Option 1 in-line inspection is included on radiation hardened part

numbers to further verify lot pedigree. Traceability of all components and production lots are

UNSPECIFIED TOLERANCES

3.4.3

SIZE

CODE IDENT NO.

DWG NO.

REV.

SHEET

00136

N/A

OS-68338

in accordance with MIL-PRF-38534, as a minimum. Tabulated records are provided as a part

of the deliverable data package. Devices are handled in accordance with MIL-STD-1686 for

Class 1 devices.

3.4.4

Inspection. The inspection requirements of MIL-PRF-55310 apply to all devices delivered to

this document. Inspection conditions and standards are documented in accordance with the

Quality Assurance, ISO-9001 derived, System of QSP-90100.

Test. The Screening test matrix of Table 5 is tailored for selectable-combination testing to

eliminate costs associated with the development/maintenance of device-specific documentation

packages while maintaining performance integrity.

Marking. Device marking shall be in accordance with the requirements of MIL-PRF-55310.

Ruggedized COTS Design Implementation. Design Pedigree “D” devices (see ¶ 5.2) use the

same robust designs found in the other device pedigrees. They do not include the provisions of

traceability or the Class-qualified componentry noted in paragraphs 3.4.3 and 4.1.

3.4.5

3.4.6

3.4.7

4.1

4.1.1

DETAIL REQUIREMENTS

Components

Crystals. Cultured quartz crystal resonators are used to provide the selected frequency for the

devices. The optional use of Premium Q swept quartz can, because of its processing to remove

impurities, be specified for better frequency aging characteristics. In accordance with MIL-

PRF-55310, the manufacturer has a documented crystal element evaluation program.

Passive Components. Established Reliability (ER) failure level R minimum passive

components are procured from QPL suppliers. Lot evaluations are in accordance with MIL-

PRF-55310 or Enhanced Element Evaluation as specified in Table 7.

Class S Microcircuits. Microcircuits are procured from wafer lots that have passed MIL-PRF-

55310 Lot Acceptance Tests for Class S devices. The prescribed die carries a Class 2 ESDS

classification in accordance with MIL-PRF-38535. When optionally specified, further testing

in accordance with MIL-PRF-55310 and MIL-PRF-38534 is performed for radiation hardness

assurance and for Enhanced Element Evaluation as specified in Table 6. Those microcircuits,

identified by a unique part number, are certified for 100krad(Si) total ionizing dose (TID),

RHA level R (2X minimum margin). NSC, as the original 54ACT designer, rates the SEU

LET at >40 MeV and SEL at >120MeV for the FACT™ family (AN-932). Vectron has

conducted additional SEE testing in 2008 to verify this performance since our lot wafer testing

does not include these parameters and determinations.

4.1.2

4.1.3

SIZE

CODE IDENT NO.

UNSPECIFIED TOLERANCES

DWG NO.

REV.

SHEET

00136

N/A

OS-68338

4.1.3.1 Class B Microcircuits. When specified, microcircuits assembled into OS-68338 Design

Pedigree letters “B” and “C” devices (¶ 5.2a) are procured from wafer lots that have passed

MIL-PRF-55310 element evaluations for Class B devices.

4.1.4

Packages. Packages are procured that meet the construction, lead materials and finishes as

specified in MIL-PRF-55310. Package lots are upscreened in accordance with the

requirements of MIL-PRF-38534 as applicable.

Traceability. Class S active device lots are homogenous and traceable to the manufacturer’s

individual wafer. Swept Quartz Crystals are traceable to the quartz bar and the processing

details of the autoclave lot, as applicable. All other elements and materials are traceable to

their manufacturer and incoming inspection lots.

Enhanced Element Evaluation. When Design Pedigree Option “E” is specified, active and

passive devices with Enhanced Element Evaluation as listed in Table 6 and 7 shall be

implemented for the highest reliability preference.

Mechanical.

Package Outline. Table 1 links each Hi-Rel Standard Model Number of this specification to a

corresponding package style. Mechanical Outline information of each package style is found

in the referenced Figure.

Thermal Characteristics. The worst case thermal characteristics of each package style are

found in Table 4.

Electrical.

Input Power. Devices are designed for standard 5.0 volt dc operation, ±10%. Optional 3.3

Vdc (±10%) input performance for ACMOS output conditions. Current is measured, no load,

at maximum rated operating voltage.

Temperature Range. Operating range is -55°C to +125°C.

Frequency Tolerance. Initial accuracy at +23°C is ±15 ppm maximum. Frequency-

Temperature Stability is ±50 ppm maximum from +23°C reference. Frequency-Voltage

Tolerance is ±4 ppm maximum.

Frequency Aging. Aging limits, and when tested in accordance with MIL-PRF-55310 Group B

inspection, shall not exceed ±1 ppm the first 30 days, ±5 ppm Year 1 and ±2 ppm per year

thereafter. When screening Option F is selected, aging is performed on 100% of the lot and

Vectron does not apply the PDA as specified in MIL-PRF-55310. Data will be presented for

each individual unit to show compliance to the aging limit.

4.1.5

4.1.6

4.2

4.2.1

4.2.2

4.3

4.3.1

4.3.2

4.3.3

4.3.4

SIZE

CODE IDENT NO.

UNSPECIFIED TOLERANCES

DWG NO.

REV.

SHEET

00136

N/A

OS-68338

推荐资源

不知道坛里有多少朋友在用NIOSS2呢: 我看见群里没有多少朋友发有关NIOSS2方面的资料，我来发点有关NIOSS的资料。我也是刚开始学这个的，希望能够与大家多多交流！...; wenhuawu FPGA/CPLD

上海工作机会: 要求: 驱动开发2年以上经验(USB驱动开发经验为佳), 沟通能力强, 团队协作意识好. 待遇: 8-10k. 地点: 徐家汇. 性质: 全职. 有意向者请emai至: window.d(at)gmail.com ...; jinqc 嵌入式系统

PIC单片机用定时器TIMER1做延时出现问题，循环进入死循环，请帮忙看下出现什么问题？: 以下是部分相关程序： void interrupt ISR(void) //配置没问题，为方便看省略 void TIMER1_INITIAL (void) { //需要在中断里重新赋初始值 T1CON = 0B00110000; //B=00,T2时钟分 ......; wqm2014 单片机

请教大家（关于ADC12单通道多次转换）: 我刚接触msp430单片机，最近要用ADC12的单通道多次转换模式，请教大家转换的次数怎么设置？比如说我要转换10次，然后求平均值。先谢谢各位了。...; bingyannan 微控制器 MCU

拆个用了四年半的插座: 四年前貌似30多买的吧，最近发现外皮裂了，虽说用了这么久也可以了， 205430 不过穷的还是拆开重新焊接一下继续用吧:lol 205431 可恶的三角螺丝，不过还是很轻松的拆了，谁让平时 ......; 数码小叶以拆会友

关于FPGA选型: FPGA选型的时候，除了考虑用户可用管脚，逻辑单元，内存之外还需要考虑啥吗？比如我写了个程序用到2000个LEs，和4000个Memory bits，我在选型的时候除了考虑着两个还需要考虑什么吗...; 3008202060 FPGA/CPLD

变电站高清智能视频监控解决方案

近几年来，随着IEC61850标准的应用和光电互感器的研发和投入使用，数字化变电站概念已在工程实践中得到应用，全国已建成一定数量的数字化变电站，数字化变电站试点工作也在开展。而我国智能电网的研究已经启动，作为电网重要组成部分，数字化变电站领域的研究和试点工作也将为智能电网的发展打下基础。数字化变电站使变电站的所有信息采集、传输、处理、输出过程由过去的模拟信息转换为数字信息，并建立与之相适应...[详细]
语音识别技术原理简介

语音识别技术原理简介自动语音识别技术(Auto Speech Recognize，简称ASR)所要解决的问题是让计算机能够“听懂”人类的语音，将语音中包含的文字信息“提取”出来。ASR技术在“能听会说”的智能计算机系统中扮演着重要角色，相当于给计算机系统安装上“耳朵”，使其具备“能听”的功能，进而实现信息时代利用“语音”这一最自然、最便捷的手段进行人机通信和交互。语音识别技术所面临的问题...[详细]
高阶辅助驾驶普及拐点已至，谁能占据智驾市场头筹？

在汽车智能化变革的浪潮中，高阶辅助驾驶正从前沿科技逐渐走进大众视野，成为行业竞争的新高地。2025年，被业内广泛视为高阶辅助驾驶普及的关键拐点，市场竞争愈发激烈，各大企业纷纷发力，试图在这片充满潜力的市场中抢占先机。近期，地平线HSD先锋体验日成为行业焦点，其发布的全新版本，以一段式端到端+强化学习技术为核心，基于征程6P强大的算力基座，为用户带来了前所未有的拟人辅助驾驶体验，被誉为“中国...[详细]
新能源车保值率如何破“腰斩”困局？

今年以来，价格战有增不减，新车此起彼伏，零公里二手车成为舆论焦点，行业内卷被官方提上休整日程……这些因素共同影响了新能源汽车今年上半年保值表现。根据中国汽车流通协会数据，2025年1至7月，三年车龄的新能源汽车保值率呈现缓慢下滑趋势。整体来看，插电式混合动力车型三年保值率略高于纯电动车型，今年7月，插电式混合动力车型三年保值率为44.1%，纯电动车型则为44.8%。相比之下，传统...[详细]
智元机器人明年预计出货量将达数万台，发布最新产品灵犀 X2-W

8 月 21 日消息，智元机器人在其首届合作伙伴大会上透露，今年出货量预计可达数千台，明年预计会有数万台的出货。未来几年，该公司希望每年出货量可达到数十万台。智元机器人还发布了最新产品灵犀 X2-W，这是一款基于 X2 平台衍生，针对“作业智能”开发的轮式双臂机器人原型。同时，智元启动了首个专注具身智能产业链的创业加速计划——“智元 A 计划”，旨在孵化 50+ 高潜力早期项目，在三年内打造千亿...[详细]
无人驾驶的基本框架你了解吗

将无人车理解为机器人并且使用机器人开发的思维处理无人车系统是目前工业界的共识，但也不乏一些单纯使用人工智能或者是智能体来完成无人驾驶的案例。其中基于深度学习的端到端无人驾驶和基于强化学习的驾驶智能体是目前的研究热点。无人驾驶系统的核心可以概述为三个部分：感知（Perception），规划（Planning）和控制（Control），这些部分的交互以及其与车辆硬件、其他车辆的交互可以用下图表...[详细]
新能源汽车整晚充电会导致电线发热起火吗

充电对于新能源汽车的使用来说，都不陌生，而作为电池的能量补给的方式来源来说，充电桩是个很重要的装置，新能源汽车充电分为快充和慢充，而一般来说，都会白天使用，利用晚上的时间对于车辆进行补电，根据充电时间来说，慢充需要5到8个小时才可以充满。充的时间过长，如整晚充电会不会导致电线发热起火？在使用的时候是无需担心的，根据车辆的充电装置来说，车辆充电器是带有自动断电功能，无论是慢充充电桩也好，还是...[详细]
AI演进：推动5G与Wi-Fi连接方式的变革

通过高通X85 5G调制解调器及射频和高通FastConnect 7900移动连接系统支持的AI连接技术，蜂窝网络与Wi-Fi网络之间可实现无缝切换，从而提升游戏和视频通话等应用的实时性能表现。 AI通过智能管理网络切换并优先处理Zoom、WhatsApp等OTT服务的流量，降低移动游戏时延、防止视频通话中断，从而显著增强用户体验。 AI可同时优化性能和效率，根据应用程序的需求动...[详细]
有R型电源变压器，再也不怕电压不合适！

在日常R型电源变压器运行中，随着使用设备的调整，使用的电压也有所变化，所以有人就会问了，那这个时候的变压器能修改电压吗？答案是可以的，一般情况下，变压器的电源电压不得超过额定值±5%，变压器可以在额定负荷下运行。那电源变压器是如何改变电压的呢？下面我们一起来看看。电源变压器不仅具有普通的电压变换功能，还具有绝缘隔离和功率传输功能；为了更好地实现这些功能，我们应该注意变压器的几个参数。首先是...[详细]
关于STM32单片机的IAP实现

一、基础概念什么是IAP？IAP即在应用中编程(In-Application Programming IAP)，简单的说就像是一个用户自定义的升级程序。实际上，STM32单片机的程序烧写有多种方法，可以用JTAG，也可用串口通过ISP软件烧写新程序。 JTAG的方式需要专用的烧写工具，在产品布置到现场后，更新产品程序比较麻烦，而通过串口的ISP软件升级方法可以直接使用常见的串口线升级程序，十...[详细]
插电式混合动力汽车在冬季使用时有哪些注意事项

很多时候我们都会听说，纯电动汽车在冬季的时候使用需要注意什么样的问题，甚至很多车主都会去做相关的攻略，如对于车辆采取“随用随充”原则，车辆使用完毕后立即进行充电，因为此时电池温度相对较高，可以提高充电效率。另外也会提前为出行做一些规划，避免续航里程不够的情况，甚至在出行的不敢开空调来进行取暖。由于纯电动汽车设计的原因，在冬天使用空调取暖的，是相当耗电的，另一个方面用开空调出热风慢也是一个方...[详细]
纯电动汽车和燃油车在保养方面谁更划算

电动汽车在结构上面是由三电所组成的，从车辆的保养角度上面来说，相对于燃油车要简单很多，电动汽车在保养上面来说，车辆的保养重心基本上是放在电动机和电池组上上面，相对燃油车复杂的系统来说，保养要比传统燃油车省事一些。电动汽车与燃油车在结构上的不一样，决定了两者在养车的项目以及保养费用上的差别。以纯电汽车的保养为例，纯电动汽车在保养上面三电基本上面以检查为主，而根据部分车企的保养政策来说，前面几...[详细]
共模半导体发布：5V，3A 高效率小尺寸降压电源模块GM6503系列

共模半导正式推出 GM6503系列产品 —— 一颗面向光通信、服务器、工业及 FPGA/ASIC 核心供电的 5 V、3 A 同步降压 DC/DC 电源模块。 GM6503系列产品提供三种封装，频率从1.5MHz至3MHz，可满足不同型号的原位替代。其中GM6503凭借 3 MHz 固定频率、22 ns 最小导通时间以及 92 °C/W 超低热阻 LGA-10 封装，在 2.5 mm × 2....[详细]
汽车半导体排名，英飞凌位居榜首

法国市场研究公司Yole Group于2025年7月31日发布了全球汽车半导体市场的最新报告。报告显示，2024年汽车半导体市场规模达到680亿美元，其中英飞凌科技（以下简称“英飞凌”）领跑。 2030年复合年增长率将达到 12%，达到1320 亿美元报告预测，2024年至2030年全球汽车半导体市场将以12%的复合年增长率增长，到2030年将增长至1320亿美元。预计每辆车的...[详细]
看以太网黑科技如何让汽车变为移动音乐厅（上）

随车载影音娱乐功能逐渐丰富，数字化传输音视频信息的需求十分迫切，传统的协议如IEEE 1394、USB或蓝牙存在兼容性及速率问题，因此需要一种简单通用的实时音视频传输方法，这就是IEEE 1722协议的产生原因。IEEE 1722协议又称A VTP （Audio Video Transport Protocol），是以太网 AVB协议族中的一员，该协议规定了用于实现时间敏感型音频、视频及控...[详细]

器件捷径: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

热门器件

开源项目推荐更多

热门活动更多

热门文章更多

技术资料推荐更多