Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
ESD, C0G Dielectric, 25 – 250 VDC
(Commercial & Automotive Grade)
Overview
The KEMET electrostatic discharge (ESD) rated commercial
and automotive grade surface mount capacitors in C0G
dielectric are suited for a variety of applications where
electrostatic discharge (ESD) events during assembly
or operation could damage the capacitor or the circuit.
These ESD rated capacitors provide the ability to design
within a given ESD criteria per the human body model
(HBM) AEC Q200–002 criteria. The KEMET automotive
grade capacitors also meet the other demanding
Automotive Electronics Council's AEC–Q200 qualification
requirements.
The C0G dielectric features a 125°C maximum operating
temperature and is considered “stable.” The Electronics
Industries Alliance (EIA) characterizes C0G dielectric as
a Class I material. Components of this classification are
temperature compensating and are suited for resonant
circuit applications, as well as those where Q and stability of
capacitance characteristics are required. The C0G dielectric
exhibits no change in capacitance with respect to time and
voltage, and boasts a negligible change in capacitance
compared to its value at 25°C. Capacitance change is limited
to ±30 ppm/°C from −55°C to +125°C.
Benefits
• AEC-Q200 automotive qualified
• ESD qualified per HBM - AEC Q200-002
• Available in package size EIA 0402, 0603, 0805, 1206
• DC Voltage ratings of 25 V, 50 V, 63 V, 100 V, 200 V and 250 V
• Capacitance range from 1 nF to 100 nF
• −55°C to +125°C operating temperature range
• Lead (Pb)-free, RoHS and REACH compliant
• Available capacitance tolerances of ±1%, ±2%, ±5%, ±10%, and ±20%
• No piezoelectric noise
• Extremely low ESR and ESL
Click image above for interactive 3D content
• High thermal stability
Open PDF in Adobe Reader for full functionality
• High ripple current capability
• Preferred capacitance solution at line frequencies and
into the MHz range
• No capacitance changes with respect to applied DC voltage
• Negligible capacitance change with respect to temperature from −55°C to +125°C
• No capacitance decay with time
• Non-polar devices, minimizing installation concerns
• 100% pure matte tin-plated termination finish allowing for excellent solderability
• Flexible Termination option available
Applications
Typical applications include: electrostatic discharge (ESD), integrated circuit (IC) protection, radio frequency (RF) filtering
function, input and output automotive applications such as controllers, navigation systems, airbags and keyless systems.
One world. One KEMET
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1091_C0G_ESD • 3/7/2018
1
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
ESD, C0G Dielectric, 25 – 250 VDC (Commercial & Automotive Grade)
Ordering Information
C
Ceramic
0603
Case Size
(L" x W")
0402
0603
0805
1206
C
103
J
3
G
Dielectric
G = C0G
E
Failure Rate/
Design
E = ESD
C
Termination
Finish
2
C = 100%
Matte Sn
AUTO
Packaging/
Grade
(C-Spec)
See
"Packaging
C-Spec
Ordering
Options
Table"
below
Specification/
Capacitance Capacitance
Rated Voltage
Series
Code (pF)
Tolerance
2
(VDC)
C = Standard
X = Flexible
Termination
Two
significant
digits and
number of
zeros
F = ±1%
G = ±2%
J = ±5%
K = ±10%
M = ±20%
3 = 25
5 = 50
M = 63
1 = 100
2 = 200
A = 250
1
2
Additional capacitance tolerance offerings may be available. Contact KEMET for details.
Additional capacitance tolerance offerings and termination finish options may be available. Contact KEMET for details.Benefits (cont'd)
Table 1A – Capacitance Range/Selection Waterfall
Case Size/
Series
Capacitance Cap Code
Rated Voltage
(VDC)
Voltage Code
25
3
C0402C
50
5
63
M
100
1
25
3
C0603C
50
5
63
M
100
200
1
2
25
3
50
5
C0805C
63
M
100
200 250
1
2
A
25
3
50
5
C1206C
63
M
100
200 250
1
2
A
Cap Tolerance
1.0 nF
1.5 nF
2.2 nF
3.3 nF
4.7 nF
6.8 nF
10 nF
15 nF
22 nF
33 nF
47 nF
68 nF
100 nF
102
152
222
332
472
682
103
153
223
333
473
683
104
ESD Level per AEC–Q200
4 kV 4 kV 4 kV 4 kV 6 kV 6 kV 6 kV 6 kV 6 kV 8 kV 8 kV 8 kV 8 kV 8 kV 8 kV 12 kV 12 kV 12 kV 12 kV 12 kV 12 kV
6 kV 6 kV
8 kV 8 kV 8 kV 8 kV 8 kV 8 kV 8 kV 8 kV 8 kV 8 kV 8 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV
6 kV
12 kV 12 kV 12 kV 12 kV 12 kV 12 kV 12 kV 12 kV 12 kV 12 kV 12 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV
16 kV 16 kV 16 kV 16 kV
16 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV 16 kV
16 kV 16 kV 16 kV 16 kV
25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV
25 kV 25 kV
25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV 25 kV
25 kV
25 kV 25 kV 25 kV 25 kV
25 kV 25 kV 25 kV 25 kV 25 kV 25 kV
25 kV
25 kV 25 kV 25 kV 25 kV
25 kV 25 kV 25 kV 25 kV 25 kV 25 kV
25 kV 25 kV
25 kV 25 kV 25 kV 25 kV 25 kV 25 kV
25 kV
25 kV 25 kV 25 kV 25 kV
25 kV
25 kV 25 kV 25 kV 25 kV
25 kV 25 kV
25 kV
F = ±1%
G = ±2%
J = ±5%
K = ±10%
M = ±20%
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1091_C0G_ESD • 3/7/2018
2
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
ESD, C0G Dielectric, 25 – 250 VDC (Commercial & Automotive Grade)
Packaging C-Spec Ordering Options Table
Packaging Type
Commercial Grade
1
Bulk Bag
7" Reel/Unmarked
13" Reel/Unmarked
7" Reel/Unmarked/2 mm pitch
2
13" Reel/Unmarked/2 mm pitch
2
7" Reel
13" Reel/Unmarked
7" Reel/Unmarked/2 mm pitch
2
13" Reel/Unmarked/2 mm pitch
2
1
1
Packaging/Grade
Ordering Code (C-Spec)
Not required (blank)
TU
7411 (EIA 0603 and smaller case sizes)
7210 (EIA 0805 and larger case sizes)
7081
7082
Automotive Grade
3
AUTO
AUTO7411 (EIA 0603 and smaller case sizes)
AUTO7210 (EIA 0805 and larger case sizes)
3190
3191
Default packaging is "Bulk Bag." An ordering code C-Spec is not required for "Bulk Bag" packaging.
The terms "Marked" and "Unmarked" pertain to laser marking option of capacitors. All packaging options labeled as "Unmarked" will contain capacitors
that have not been laser marked. The option to laser mark is not available on these devices. For more information see "Capacitor Marking."
2
The 2 mm pitch option allows for double the packaging quantity of capacitors on a given reel size. This option is limited to EIA 0603 (1608 metric) case
size devices. For more information regarding 2 mm pitch option see "Tape & Reel Packaging Information".
3
Reeling tape options (Paper or Plastic) are dependent on capacitor case size (L" x W") and thickness dimension. See "Chip Thickness/Tape & Reel
Packaging Quantities" and "Tape & Reel Packaging Information."
3
For additional information regarding "AUTO" C-Spec options, see "Automotive C-Spec Information."
3
All automotive packaging C-Specs listed exclude the option to laser mark components. The option to laser mark is not available on these devices. For
more information see "Capacitor Marking."
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1091_C0G_ESD • 3/7/2018
3
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
ESD, C0G Dielectric, 25 – 250 VDC (Commercial & Automotive Grade)
Automotive C-Spec Information
KEMET automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council.
Details regarding test methods and conditions are referenced in document AEC–Q200, Stress Test Qualification for Passive
Components. These products are supported by a Product Change Notification (PCN) and Production Part Approval Process
warrant (PPAP).
Automotive products offered through our distribution channel have been assigned an inclusive ordering code C-Spec, “AUTO.”
This C-Spec was developed in order to better serve small and medium-sized companies that prefer an automotive grade
component without the requirement to submit a customer Source Controlled Drawing (SCD) or specification for review by a
KEMET engineering specialist. This C-Spec is therefore not intended for use by KEMET OEM automotive customers and are
not granted the same “privileges” as other automotive C-Specs. Customer PCN approval and PPAP request levels are limited
(see details below.)
Product Change Notification (PCN)
The KEMET product change notification system is used to communicate primarily the following types of changes:
• Product/process changes that affect product form, fit, function, and/or reliability
• Changes in manufacturing site
• Product obsolescence
KEMET Automotive
C-Spec
KEMET assigned
1
AUTO
1
Customer Notification Due To:
Process/Product change
Yes (with approval and sign off)
Yes (without approval)
Obsolescence*
Yes
Yes
Days Prior To
Implementation
180 days minimum
90 days minimum
KEMET assigned C-Specs require the submittal of a customer SCD or customer specification for review. For additional information contact KEMET.
Production Part Approval Process (PPAP)
The purpose of the Production Part Approval Process is:
• To ensure that supplier can meet the manufacturability and quality requirements for the purchased parts.
• To provide the evidence that all customer engineering design records and specification requirements are properly
understood and fulfilled by the manufacturing organization.
• To demonstrate that the established manufacturing process has the potential to produce the part.
KEMET Automotive
C-Spec
KEMET assigned
1
AUTO
1
PPAP (Product Part Approval Process) Level
1
●
○
2
●
3
●
○
4
●
5
●
KEMET assigned C-Specs require the submittal of a customer SCD or customer specification for review. For additional information contact KEMET.
● Part number specifi
c PPAP available
○ Product family PPAP only
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1091_C0G_ESD • 3/7/2018
4
Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)
ESD, C0G Dielectric, 25 – 250 VDC (Commercial & Automotive Grade)
Dimensions – Millimeters (Inches)
W
L
T
B
S
EIA Size
Code
Metric Size
Code
L
Length
W
Width
T
Thickness
B
Bandwidth
S
Separation
Minimum
0.30 (0.012)
0.70 (0.028)
0.75 (0.030)
N/A
Mounting
Technique
Without Flexible Termination
0402
0603
0805
1206
1005
1608
2012
3216
1.00 (0.040)
±0.05 (0.002)
1.60 (0.063)
±0.15 (0.006)
2.00 (0.079)
±0.20 (0.008)
3.20 (0.126)
±0.20 (0.008)
1.60 (0.063)
±0.17 (0.007)
2.00 (0.079)
±0.30 (0.012)
3.30 (0.130)
±0.40 (0.016)
0.50 (0.020)
±0.05 (0.002)
0.80 (0.032)
±0.15 (0.006)
1.25 (0.049)
±0.20 (0.008)
1.60 (0.063)
±0.20 (0.008)
With Flexible Termination
0603
0805
1206
1608
2012
3216
0.80 (0.032)
±0.15 (0.006)
1.25 (0.049)
±0.30 (0.012)
1.60 (0.063)
±0.35 (0.013)
See Table 2 for
Thickness
0.45 (0.018)
±0.15 (0.006)
0.50 (0.02)
±0.25 (0.010)
0.60 (0.024)
±0.25 (0.010)
0.58 (0.023)
0.75 (0.030)
N/A
Solder wave or
Solder reflow
See Table 2 for
Thickness
0.30 (0.012)
±0.10 (0.004)
0.35 (0.014)
±0.15 (0.006)
0.50 (0.02)
±0.25 (0.010)
0.50 (0.02)
±0.25 (0.010)
Solder reflow
only
Solder wave
or
Solder reflow
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • 864-963-6300 • www.kemet.com
C1091_C0G_ESD • 3/7/2018
5
DIY/开源硬件专区
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
