PT-120-TE Product Datasheet
Luminus LED™
PT-120-TE
Thermally Enhanced
LED Projection Chipset
Features:
Table of Contents
Technology Overview
. . . . . . . . . . 2
Understanding Luminus Test
Specifications
. . . . . . . . . . . . . . . . . . 2
Ordering Information
. . . . . . . . . . 3
Blue DWL Bin Definition
. . . . . . . . 4
Flux /Power Bin Definition
. . . . . . 5
Optical & Electrical
Characteristics
. . . . . . . . . . . . . . . 6-7
Blue Flux Bin Ranges by
Wavelength
. . . . . . . . . . . . . . . . . . . 8
Characterization Curves
. . . . . . . . 9
Spectrum and Angular
Intensity Distribution
. . . . . . . . . . 10
Thermal Resistance
. . . . . . . . . . . 11
Mechanical Dimensions
. . . 12 -13
Shipping Tray Outline
. . . . . . . . . 14
Packing and Shipping
Specifications
. . . . . . . . . . . . . . . . 15
History of Changes
. . . . . . . . . . . . 16
•
Matched RGB Chipset with 12 mm
2
emitting area designed for projection
applications
•
16:9 aspect ratio matched with micro-display and screen aspect ratio
•
Ultra low thermal resistance package enables high performance applications
[operation up to 36 A (3 A/mm
2
)]
•
Wide color gamut: Red 623 nm, Red-Amber 613 nm, Green 525 nm, Blue 460 nm
typical dominant wavelength
•
Single emitting area per color allows for collection with single lens for simplified
optics
•
High precision LED placement on copper core PCB for easier thermal management
and optical integration
•
Environmentally friendly: RoHS and REACH compliant
Applications
•
Data front projectors and professional Rear-Projection Displays with 16:9
aspect ratio
•
Optimized for Micro-Display diagonal sizes ranging from 0.65” to 0.95” with 16:9
aspect ratio
•
Suitable for DLP™ (0.65”XGA, 0.95” 1080p), LCoS, HTPS and 3LCD microdisplays
1
PDS-002058 Rev 05 © 2014 Luminus Devices, Inc. - All Rights Reserved
Luminus Devices, Inc.
•
T
978.528.8000 • www.luminus.com
1100 Technology Park Drive • Billerica, MA 01821
PT-120-TE Product Datasheet
Technology Overview
Luminus Devices’ Projection Technology (PT) is an innovative solid-state light source created to replace arc lamps in projection systems,
enabling a new category of lamp-free projectors. Enabled by Luminus technology, our chipsets represent a major breakthrough in
brightness that delivers all the benefits of solid state light sources in projections applications, including wide color gamut for vivid
colors, exceeds NTSC, Environmentally friendly technology (Mercury-free), instant start and re-start with no more wait time, high
reliability; no more lamp replacement , and electronic control of color points and light intensity on a frame by frame basis. Luminus
products benefit from numerous innovations in the domain of packaging, thermal management and optical coupling that allow
designers to achieve efficient light engine designs and deliver high screen brightness.
Packaging Technology
Thermal management is critical in high power LED applications.
With a thermal resistance from junction to case of 0.4º C/W,
Luminus PT-120 LEDs can be driven at higher current densities
while maintaining a low junction temperature, thereby resulting
in brighter solutions and longer lifetimes.
Environmental Benefits
Luminus LEDs help reduce power consumption and the
amount of hazardous waste entering the environment. All
Luminus LED products manufactured by Luminus are RoHS and
REACH compliant and free of hazardous materials, including
lead and mercury.
Reliability
For high power operation, Luminus LEDs™ are one of the most
reliable light sources in the world today. Luminus LEDs have
passed a rigorous suite of environmental and mechanical stress
tests, including mechanical shock, vibration, temperature
cycling and humidity, and have been fully qualified for use in
extreme high power and high current applications. With very
low failure rates and median lifetimes that typically exceed
60,000 hours, Luminus LEDs are ready for even the most
demanding applications. (Please refer to Luminus’ Reliability
application note for more information.)
Understanding Luminus LED Test Specifications
Every Luminus LED is extensively tested at full current to ensure that it meets the high quality standards expected from Luminus’
products.
Testing of Luminus LEDs
Luminus core board products are typically measured in such a
way that the characteristics reported agree with how the
devices will actually perform when incorporated into a system.
This measurement is accomplished by mounting the devices on
a 40ºC heat sink and allowing the device to reach thermal
equilibrium while fully powered. Only after the device reaches
equilibrium are the measurements taken. This method of
measurement ensures that Luminus LEDs perform in the field
just as they are specified.
2
PDS-002058 Rev 05 © 2014 Luminus Devices, Inc. - All Rights Reserved
Expected flux values in real world operation can be extrapolated
based on the information contained within this product data
sheet.
Luminus Devices, Inc.
•
T
978.528.8000 • www.luminus.com
1100 Technology Park Drive • Billerica, MA 01821
PT-120-TE Product Datasheet
Ordering Information
Ordering Part Number
1
PT-120-R-L11-MPD
3
PT-120-R-L11-MPE
3
PT-120-R-L11-MPF
3
PT-120-RA-L11-MPE
3
PT-120-RA-L11-MPF
3
PT-120-RA-L11-MPG
3
PT-120-RA-L11-MPH
3
PT-120-RAX-L15-MPH
PT-120-RAX-L15-MPJ
PT-120-RAX-L15-MPK
PT-120-G-L11-MPK
PT-120-G-L11-MPL
PT-120-G-L11-MPM
PT-120-G-L11-MPN
PT-120-B-L11-EPDnnn
PT-120-B-L11-EPEnnn
PT-120-B-L11-EPFnnn
PT-120-B-L11-EPGnnn
Blue
Green
RAX
(Preliminary)
Color
Red
Min Flux
Bin
2
5C
5D
5E
5D
Description
Red LED, consisting of a 12 mm
2
LED chip , thermistor and connector
mounted on a copper-core PCB.
Red
Amber
5E
5F
5G
5H
5J
5K
5J
5K
5L
5M
5F
5G
5H
5J
Red-Amber LED, consisting of a 12 mm
2
LED chip, thermistor and connec-
tor mounted on a copper-core PCB.
Red-Amber LED, consisting of a 12 mm
2
LED chip, thermistor and
connector mounted on a copper-core PCB. ( Common cathode
configuration ; reverse polarity pin out)
Green LED, consisting of a 12 mm
2
LED chip, thermistor and connector
mounted on a copper-core PCB.
Blue LED, consisting of a 12 mm
2
LED chip, thermistor and connector
mounted on a copper-core PCB (nnn=DW bin - refer to table below
for definition).
Note 1: Ordering part numbers represent bin kits (group of bins that are shippable for a given ordering part number)
Note 2: See Bin Kit and Flux bin definitions on page 4.
Note 3: Not recommended for new designs.
3
PDS-002058 Rev 05 © 2014 Luminus Devices, Inc. - All Rights Reserved
Luminus Devices, Inc.
•
T
978.528.8000 • www.luminus.com
1100 Technology Park Drive • Billerica, MA 01821
PT-120-TE Product Datasheet
PT-120 Blue Dominant Wavelength Bin Definition
Blue Dominant Wavelength Bins
Blue Dominant Wavelength
Bin Designator
1
nnn
None
101
102
103
WY
(450 nm - 454 nm)
WX
(454 nm - 462 nm)
WZ
(462 nm - 468 nm)
þ
þ
þ
þ
þ
þ
þ
þ
Note 1: See page 3 for examples of ordering part numbers for PT-120 Blue on Ordering Part Number Nomenclature section.
Ordering Part Number Nomenclature
PT
Product Family
mm
Chip Area
XXXX
Color
R= Red (623nm, typ)
2
RA= Red -Amber (613nm, typ)
2
RAX=Red-Amb(613nm,typ)
G= Green
B= Blue
L11
Package Configuration
XYZ
Bin Kit
1
PT: Copper-core
PCB
120: 12 mm
2
L11: 28 mm x 26.75 mm
L15: 28 mm x 26.75 mm (reverse polarity)
See Mechanical Drawing section
See page 4
for bin kit
definition
Note 1:
A Bin Kit represents a group of individual flux or power bins that are shippable for a given ordering part number. Individual flux bins are not orderable.
EXAMPLES:
PT-120-G-L11-MPK is comprised of Green Flux Bins 5J, 5K, 5L, 5M, 5N, 5P
PT-120-B-L11-EPD is comprised of Blue Flux Bins 5F, 5G, 5H, 5J, 5K and DWL bins WY, WX, WZ (DWL range 450nm-468nm)
PT-120-B-L11-EPD101 is comprised of Blue Flux Bins 5F, 5G, 5H, 5J, 5K and DWL bins WX only (DWL range 454nm-462nm)
Not recommended for new designs.
Note 2:
4
PDS-002058 Rev 05 © 2014 Luminus Devices, Inc. - All Rights Reserved
Luminus Devices, Inc.
•
T
978.528.8000 • www.luminus.com
1100 Technology Park Drive • Billerica, MA 01821
PT-120-TE Product Datasheet
PT-120 Bin Kit
1
and Flux Bin
2,3 ,4
Definitions
Note: Please refer to ordering part number table on page 3 for Bin Kit availability.
Red Flux Bins
Red Bin Flux Range
4
(lm)
PT-120-R-L11-MPD
PT-120-R-L11-MPE
PT-120-R-L11-MPF
Red -Amber Flux Bins
Red -Amber( RA )
Bin Flux Range
4
(lm)
PT-120-RA-L11-MPE
PT-120-RA-L11-MPF
PT-120-RA-L11-MPG
PT-120-RA-L11-MPH
RAX Flux Bins (Preliminary)
RAX
Bin Flux Range
4
(lm)
PT-120-RAX-L15-MPH
PT-120-RAX-L15-MPJ
PT-120-RAX-L15-MPK
Green Flux Bins
Green Bin Flux Range
4
(lm)
PT-120-G-L11-MPK
PT-120-G-L11-MPL
PT-120-G-L11-MPM
PT-120-G-L11-MPN
Blue Power Bins
Blue Bin Flux Range
5
(lm)
PT-120-B-L11-EPDnnn
PT-120-B-L11-EPEnnn
PT-120-B-L11-EPFnnn
PT-120-B-L11-EPGnnn
Note 1:
Bin 5F
750-815
Bin 5G
815-880
Bin 5H
880-940
Bin 5J
4200-4400
Bin 5K
4400-4650
Bin 5H
2150-2300
Bin 5J
2300-2450
Bin 5K
2450-2625
Bin 5D
1630-1760
Bin 5E
1760-1900
Bin 5C
1490-1630
Bin 5D
1630-1760
Bin 5E
1760-1900
Bin 5F
1900-2025
Bin 5G
2025-2150
Bin 5H
2150-2300
Bin 5J
2300-2450
þ
þ
þ
þ
þ
þ
Bin 5F
1900-2025
þ
þ
þ
Bin 5G
2025-2150
þ
þ
þ
Bin 5H
2150-2300
þ
þ
Bin 5J
2300-2450
þ
Bin 5K
2450-2625
Bin 5L
2625-2800
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
Bin 5L
2625-2800
þ
þ
þ
þ
Bin 5M
2800-3000
þ
þ
þ
Bin 5N
3000-3200
þ
þ
Bin 5P
3200-3400
þ
þ
þ
þ
þ
þ
þ
Bin 5L
4650-4900
þ
þ
þ
5M
4900-5200
þ
þ
þ
5N
5200-5500
þ
þ
5P
5500-5825
þ
5Q
5825-6200
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
Bin 5J
940-1000
þ
þ
þ
þ
Bin 5K
1000-1070
þ
þ
þ
þ
Bin 5L
1070-1145
þ
þ
þ
5M
1145-1220
5N
1220-1300
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
Bin Kits are defined by a group of flux or power bins. Only one flux bin will be shipped in each individual pack. A shipment will contain packs of
different allowed flux bins for a particular ordering part number. In order to ensure availability, individual Flux or Power bins are not ordereable.
Note 2:
PT-120 LEDs are tested for luminous flux at 30 A at 25% duty cycle for Red, and Blue. and at 50% duty cycle for Green Devices.
Devices are sorted and packed by flux bin. Not all flux bins are are currrently populated.
Note 3:
Note 4:
Note 5:
Luminus maintains a test measurement accuracy for LED flux and power of +/- 6%.
Red and Green Flux bin limits apply across entire dominant wavelength range. Dominant wavelength range for Red and Green devices are
specified on the Optical & Electrical Characteristics section.
Blue Flux bin limits are defined at dominant wavelength, 462 nm.
5
PDS-002058 Rev 05 © 2014 Luminus Devices, Inc. - All Rights Reserved
Luminus Devices, Inc.
•
T
978.528.8000 • www.luminus.com
1100 Technology Park Drive • Billerica, MA 01821
FPGA/CPLD
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
