Rack & Panel
42 Series
Panel Mount Miniature
22 AWG - .030" Diameter - 5 Amps
TERMINATION TYPES
.125" or .156" standard
lengths with other lengths
available on special order.
Grid Spacing:
.100" x .100" grid
50 or 74 contact positions on
.100" centers in 3 rows. Two
outboard rows for 25
contacts each. Center row
either for 24 additional
contacts or polarizing pins in
specified positions.
Available in 50 contact configuration only.
Choice of any combination of 24, center
positions. Specify polarizing positions
required. Positions top to bottom are: A, B, C,
Current Rating:
5.0 amps.
Pin Contacts:
.030" dia. gold plated brass
conforming to specification
QQ-B-626.
Socket
Gold plated phosphor bronze.
Contacts:
Termination
Types:
Solder cup, dip solder and
crimp removable contacts.
Housing
Material:
Red diallyl phthalate for Dip
Solder and Solder Cup
Housings. Green diallyl
phthalate for Crimp Remov-
able Housings
Automatic Crimping Machine:
Cat. No. 107-0952.
Hand Crimping Tool:
Cat. No. 107-0616.
Locator:
Cat. No. 107-0617.
Dip Solder:
Solder Cup:
Crimp
Removable:
Accommodates up to #22
AWG stranded wire.
Crimp contacts available for
#20 through #30 AWG
stranded wire. Designed for
four indent crimp. See crimp
tooling.
POLARIZATION
SPECIFICATIONS
D, E, F, H, J, K, L, M, N, P, R, S, T, U, V, W, X,
Y, Z, a.b.
When 74 contacts are required no polarization
other than hardware polarization is available.
Dielectric:
Minimum withstanding voltage is
one minute electrification at
1200 VAC.
Polarizing pins may be used in
any combination in center row.
Passivated stainless steel,
anodized aluminum knobs.
Anodized aluminum, top
opening only.
Polarization:
Jackscrews:
Hoods:
CRIMP TOOLING
Contact Removal Tool:
Cat. No. 107-1012.
Contact Insertion Tool:
Cat. No. 107-1011.
Winchester/Retconn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP /
61
Rack & Panel
42 Series
OUTLINE
Dimensions are for reference only and
are subject to change. Outline drawings
on request.
.100 Typ.
.06 R
.23
.69
.31
1.563
Panel Mount Miniature
22 AWG - .030" Diameter - 5 Amps
.100 (Typ.)
6-32 UNC 2-A
THD. Typ.
3.125
2.802
.38 x 1.41
Cable Opening
Solder Cup
.035 Dia.
Typ.
4-40 UNC 2-A
THD. Typ
.030 Dia. Typ.
.38
.23
.69
.17
1.469
Solder Cup, Clipped-in Contacts
ORDERING INFORMATION
42
36
50 / 74
P/S
■
Step 1
■
Step 2
■
Step 3
■
Step 4
■
Step 5
Series Code:
Series 42
Hardware and
Accessories:
(See bottom chart)
No. of Contacts:
50 or 74
Contact Type:
S = Socket
P = Pin
Polarization Positions:
Blank = Non-Polarized
Polarization available in 50 contact
configuration only. Choice of any
combination of 24 center positions.
Specify polarizing positions required.
Positions top to bottom are: A, B, C, D,
E, F, H, J, K, L, M, N, P, R, S, T, U, V,
W, X, Y, Z, a, b.
When 74 contacts are required no
polarization other than hardware
polarization is available.
SOLDER CUP PLUG (Clipped-in Contacts)
34 = Molding, No Hardware
35 = Molding, With Guides
36 = Molding, With Fixed Jackscrews
52 = Molding, With Short-Turning Jackscrews
53 = Molding, With Long-Turning Jackscrews
54 = Molding, With Guides and Hood
55 = Molding, With Long-Turning Jackscrews
55 =
and Hood
SOLDER CUP RECEPTACLE (Clipped-in Contacts)
40 = Molding, No Hardware
41 = Molding, With Guides
42 = Molding, With Short-Turning Jackscrews,
42 =
No Hood
43 = Molding, With Long-Turning Jackscrews,
42 =
No Hood
44 = Molding, With Guides and Hoods
45 = Molding, With Long-Turning Jackscrews
42 =
and Hood
46 = Molding, With Fixed Jackscrews
Winchester/Retconn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP /
62
Rack & Panel
42 Series
OUTLINE
Dimensions are for reference only and
are subject to change. Outline drawings
on request.
Panel Mount Miniature
22 AWG - .030" Diameter - 5 Amps
Dip Solder Receptacle
Shown:
74 contact right angle configuration. Center row eliminated for 50 contact connector.
.550
.450
.375
2.802
.350
.234
3.125
4-40 UNC 2-A THD. Typ
.688
Typ.
.205
.156
.100
Typ.
.030
.313
Dip Solder, Molded-in Contacts
ORDERING INFORMATION
42
- 30
74
P
4
■
Step 1
■
Step 2
■
Step 3
■
Step 4
■
Step 5
■
Step 6
Series Code:
Series 42
Hardware and
Accessories:
DIP SOLDER
(Molded-in Contacts)
30 = No Hardware
31 = Guide Pin
and Socket
32 = Fixed Jackscrew
and Jacksocket
No. of Contacts:
50 or 74
Contact Type:
P = Pin
Termination Type:
4 = Dip Solder
Contacts...125"
Polarization available in 50
5 = Dip Solder
contact configuration only. Choice
Contacts...156"
of any combination of 24 center
852 = Right Angle
positions. Specify polarizing
Dip Solder
positions required. Positions top
Contacts .205"
to bottom are: A, B, C, D, E, F, H,
J, K, L, M, N, P, R, S, T, U, V, W,
X, Y, Z, a, b.
When 74 contacts are required no
polarization other than hardware
polarization is available.
Polarization Positions:
Blank = Non-Polarized
Winchester/Retconn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP /
63
Rack & Panel
42 Series
Panel Mount Miniature
22 AWG - .030" Diameter - 5 amps
OUTLINE
.37
.18
.69
.32
#6-32 UNC-2A
.200
.050
2.800
3.13
2.50
.100 Typ.
#6-32 UNC-2B
.100
.200
.15
1.54
ORDERING INFORMATION
42
1
36
50
P
■
Step 1
■
Step 2
■
Step 3
■
Step 4
■
Step 5
■
Step 6
Series Code:
Series 42
1 = Crimp Connector
Molding
Hardware and
Accessories:
(See bottom chart)
No. of
Contacts:
50 or 74
Contact Type:
S = Socket
P = Pin
Crimp removable contacts
are ordered separately.
Pin Contacts:
100-4020P
100-4024P
100-4028P
Socket Contacts:
100-4020S
100-4024S
100-4028S
Socket Contacts
(Closed Entry):
100-54020S
100-54024S
100-54028S
Polarization Positions:
Blank = Non-Polarized
Polarization available in 50
contact configuration only. Choice
of any combination of 24 center
positions. Specify polarizing
positions required. Positions top
to bottom are: A, B, C, D, E, F, H,
J, K, L, M, N, P, R, S, T, U, V, W,
X, Y, Z, a, b.
When 74 contacts are required no
polarization other than hardware
polarization is available.
Crimp Removable Pin Contacts
34 = Molding, No Hardware
35 = Molding, With Guides
36 = Molding, With Fixed Jackscrews
52 = Molding, With Short-Turning Jackscrews
53 = Molding, With Long-Turning Jackscrews
54 = Molding, With Guides and Hood
55 = Molding, With Long-Turning Jackscrews
55 =
and Hood
Crimp Removable Socket Contacts
40 = Molding, No Hardware
41 = Molding, With Guides
42 = Molding, With Short-Turning Jackscrews,
42 =
No Hood
43 = Molding, With Long-Turning Jackscrews,
42 =
No Hood
44 = Molding, With Guides and Hoods
45 = Molding, With Long-Turning Jackscrews
42 =
and Hood
46 = Molding, With Fixed Jackscrews
See 100 Series Contact
Section of Rack & Panel
Winchester/Retconn
62 Barnes Industrial Road North, Wallingford, Connecticut 06492 Phone:(203)741-5400 Fax:(203)741-5500 www.winchesterelectronics.com
RP /
64
电子竞赛
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
