E
n
n
n
n
n
n
SEE NEW DESIGN RECOMMENDATIONS
REFERENCE ONLY
2-MBIT SmartVoltage BOOT BLOCK
FLASH MEMORY FAMILY
28F200BV-T/B, 28F200CV-T/B, 28F002BV-T/B
Intel SmartVoltage Technology
5 V or 12 V Program/Erase
3.3 V or 5 V Read Operation
Very High-Performance Read
5 V: 60 ns Access Time
3 V: 110 ns Access Time
Low Power Consumption
Max 60 mA Read Current at 5 V
Max 30 mA Read Current at
3.3 V–3.6 V
x8/x16-Selectable Input/Output Bus
28F200 for High Performance 16- or
32-bit CPUs
x8-Only Input/Output Architecture
28F002B for Space-Constrained
8-bit Applications
Optimized Array Blocking Architecture
One 16-KB Protected Boot Block
Two 8-KB Parameter Blocks
96-KB and 128-KB Main Blocks
Top or Bottom Boot Locations
Extended Temperature Operation
–40 °C to +85 °C
n
n
Extended Block Erase Cycling
100,000 Cycles at Commercial Temp
10,000 Cycles at Extended Temp
Automated Word/Byte Program and
Block Erase
Command User Interface
Status Registers
Erase Suspend Capability
SRAM-Compatible Write Interface
Automatic Power Savings Feature
Reset/Deep Power-Down Input
0.2 µA I
CC
Typical
Provides Reset for Boot Operations
Hardware Data Protection Feature
Absolute Hardware-Protection for
Boot Block
Write Lockout during Power
Transitions
Industry-Standard Surface Mount
Packaging
40-, 48-, 56-Lead TSOP
44-Lead PSOP
Footprint Upgradeable to 4-Mbit and
8-Mbit Boot Block Flash Memories
ETOX™ IV Flash Technology
n
n
n
n
n
n
n
n
New Design Recommendations:
For new 2.7 V–3.6 V V
CC
designs with this device, Intel recommends using the Smart 3 Advanced Boot
Block. Reference
Smart 3 Advanced Boot Block 4-Mbit, 8-Mbit, 16-Mbit Flash Memory Family
datasheet,
order number 290580.
For new 5 V V
CC
designs with this device, Intel recommends using the 2-Mbit Smart 5 Boot Block. Reference
Smart 5 Flash Memory Family 2, 4, 8 Mbit
datasheet, order number 290599.
These documents are also available at Intel’s website, http://www.intel.com/design/flcomp.
December 1997
Order Number: 290531-005
Information in this document is provided in connection with Intel products. No license, express or implied, by estoppel or
otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel’s Terms and Conditions of
Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to
sale and/or use of Intel products including liability or warranties relating to fitness for a particular purpose, merchantability, or
infringement of any patent, copyright or other intellectual property right. Intel products are not intended for use in medical, life
saving, or life sustaining applications.
Intel may make changes to specifications and product descriptions at any time, without notice.
The 28F200BV-T/B, 28F200CV-T/B, 28F002BV-T/B may contain design defects or errors known as errata. Current
characterized errata are available on request.
*Third-party brands and names are the property of their respective owners.
Contact your local Intel sales office or your distributor to obtain the latest specifications and before placing your product order.
Copies of documents which have an ordering number and are referenced in this document, or other Intel literature, may be
obtained from:
Intel Corporation
P.O. Box 5937
Denver, CO 8021-9808
or call 1-800-548-4725
or visit Intel’s website at http://www.intel.com
COPYRIGHT © INTEL CORPORATION, 1997
CG-041493
*Third-party brands and names are the property of their respective owners..
E
PAGE
1.0 PRODUCT FAMILY OVERVIEW.....................5
1.1 New Features in the SmartVoltage Products 5
1.2 Main Features ..............................................5
1.3 Applications..................................................6
1.4 Pinouts.........................................................7
1.5 Pin Descriptions .........................................11
2.0 PRODUCT DESCRIPTION............................13
2.1 Memory Blocking Organization...................13
2.1.1 One 16-KB Boot Block.........................13
2.1.2 Two 8-KB Parameter Blocks................13
2.1.3 One 96-KB + One 128-KB Main Block.13
3.0 PRODUCT FAMILY PRINCIPLES OF
OPERATION ................................................15
3.1 Bus Operations ..........................................15
3.2 Read Operations ........................................15
3.2.1 Read Array ..........................................15
3.2.2 Intelligent Identifiers ............................17
3.3 Write Operations ........................................17
3.3.1 Command User Interface (CUI) ...........17
3.3.2 Status Register....................................20
3.3.3 Program Mode.....................................21
3.3.4 Erase Mode .........................................21
3.4 Boot Block Locking ....................................22
3.4.1 V
PP
= V
IL
for Complete Protection .......22
3.4.2 WP# = V
IL
for Boot Block Locking .......22
3.4.3 RP# = V
HH
or WP# = V
IH
for Boot Block
Unlocking ...........................................22
3.4.4 Upgrade Note for 8-Mbit 44-PSOP
Package .............................................22
3.5 Power Consumption...................................26
3.5.1 Active Power .......................................26
3.5.2 Automatic Power Savings (APS) .........26
3.5.3 Standby Power ....................................26
3.5.4 Deep Power-Down Mode.....................26
2-MBIT SmartVoltage BOOT BLOCK FAMILY
CONTENTS
PAGE
3.6 Power-Up/Down Operation.........................26
3.6.1 RP# Connected To System Reset .......26
3.6.2 V
CC
, V
PP
AND RP# Transitions............27
3.7 Power Supply Decoupling ..........................27
3.7.1 VPP Trace On Printed Circuit Boards ..27
4.0 ELECTRICAL SPECIFICATIONS..................28
4.1 Absolute Maximum Ratings ........................28
4.2 Commercial Operating Conditions ..............28
4.2.1 Applying V
CC
Voltages.........................29
4.3 Capacitance ...............................................29
4.4 DC Characteristics—Commercial ...............30
4.5 AC Characteristics—Commercial ...............34
4.6 AC Characteristics—WE#-Controlled Write
Operations—Commercial ..........................37
4.7 AC Characteristics—CE#-Controlled Write
Operations—Commercial ..........................40
4.8 Erase and Program Timings—Commercial.43
4.9 Extended Operating Conditions..................43
4.9.1 Applying V
CC
Voltages.........................44
4.10 Capacitance .............................................44
4.11 DC Characteristics—Extended
Temperature Operations............................45
4.12 AC Characteristics—Read Only
Operations—Extended Temperature .........49
4.13 AC Characteristics—WE#-Controlled Write
Operations— Extended Temperature ........50
4.14 AC Characteristics—CE#-Controlled Write
Operations— Extended Temperature ........52
4.15 Erase and Program Timings—Extended
Temperature..............................................53
5.0 ORDERING INFORMATION..........................54
6.0 ADDITIONAL INFORMATION .......................55
Related Intel Information ..................................55
SEE NEW DESIGN RECOMMENDATIONS
3
2-MBIT SmartVoltage BOOT BLOCK FAMILY
REVISION HISTORY
Number
-001
-002
Initial release of datasheet.
Description
E
Status changed from Product Preview to Preliminary
28F200CV/CE/BE references and information added throughout.
2.7 V CE/BE specs added throughout.
The following sections have been changed or rewritten: 1.1, 3.0, 3.2.1, 3.2.2, 3.3.1,
3.3.1.1, 3.3.2, 3.3.2.1, 3.3.3, 3.3.4, 3.6.2.
Note 2 added to Figure 3 to clarify 28F008B pinout vs. 28F008SA.
Sentence about program and erase WSM timeout deleted from Section 3.3.3, 3.3.4.
Erroneous arrows leading out of error states deleted from flowcharts in Figs. 9, 10.
Sections 5.1, 6.1 changed to “Applying V
CC
Voltages.” These sections completely
changed to clarify V
CC
ramp requirements.
I
PPD
3.3 V Commercial spec changed from 10 to 5
µA.
Capacitance tables added after commercial and extended DC Characteristics tables.
Test and slew rate notes added to Figs. 12, 13, 19, 20, 21.
Test configuration drawings (Fig. 14, 22) consolidated into one, with component
values in table. (Component values also rounded off).
t
ELFL
, t
ELFH
, t
AVFL
changed from 7 to 5 ns for 3.3 V BV-60 commercial and 3.3 V
TBV-80 extended, 10 to 5 ns for 3.3 V BV-80 and BV-120 commercial.
t
WHAX
and t
EHAX
changed from 10 to 0 ns.
t
PHWL
changed from 1000 ns to 800 ns for 3.3 V BV-80, BV-120 commercial.
t
PHEL
changed from 1000 ns to 800 ns for 3.3 V BV-60, BV-80, and BV-120 commercial.
Applying V
CC
voltages (Sections 5.1 and 6.1) rewritten for clarity.
Minor cosmetic changes/edits.
Corrections: “This pin not available on 44-PSOP” inaccurate statement removed from pin
description for WP# pin; Spec “t
QWL
” corrected to “t
QVVL;
” intelligent identifier values
corrected; Intel386™ EX block diagram updated because new 386 specs require less
glue logic.
Max program times for parameter and 96-KB main block added.
Specs t
ELFL
and t
ELFH
changed from 5 ns (max) to 0 ns (min).
Specs t
EHQZ
and t
HQZ
improved.
New specs t
PLPH
and t
PLQZ
added from Specification Update document (297612).
-003
-004
-005
Corrections: Figure 4, corrected pin designation 3 to “NC” from A
17
on PA28F200.
Corrected typographical errors in
Ordering Information
.
Added
New Design Recommendations
section to cover page.
Updated
Erase Suspend/Resume Flowchart
4
SEE NEW DESIGN RECOMMENDATIONS
E
1.0
2-MBIT SmartVoltage BOOT BLOCK FAMILY
•
Enhanced
circuits
optimize
low
V
CC
performance, allowing operation down to
V
CC
= 3.0 V.
PRODUCT FAMILY OVERVIEW
This datasheet contains the specifications for the
two branches of products in the SmartVoltage
2-Mbit boot block flash memory family. These
-BV/CV suffix products offer 3.0 V–3.6 V operation
and also operate at 5 V for high-speed access
times. Throughout this datasheet, the 28F200
refers to all x8/x16 2-Mbit products, while
28F002B refers to all x8 2-Mbit boot block
products. Section 1.0 provides an overview of the
flash memory family including applications, pinouts
and pin descriptions. Sections 2.0 and 3.0
describe the memory organization and operation
for these products. Section 4.0 contains the
family’s operating specifications. Finally, Sections
5.0 and 6.0 provide ordering and document
reference information.
If you are using BX/BL 12 V V
PP
boot block
products today, you should account for the
differences listed above and also allow for
connecting 5 V to V
PP
and disconnecting 12 V
from V
PP
line, if 5 V writes are desired.
1.2
Main Features
1.1
New Features in the
SmartVoltage Products
The SmartVoltage boot block flash memory family
offers identical operation with the BX/BL 12 V
program products, except for the differences listed
below. All other functions are equivalent to current
products, including signatures, write commands,
and pinouts.
•
WP# pin has replaced a DU (Don’t Use) pin.
Connect the WP# pin to control signal or to
V
CC
or GND (in this case, a logic-level signal
can be placed on DU pin). Refer to Tables 2
and 9 to see how the WP# pin works.
5 V program/erase operation has been added.
If switching V
PP
for write protection, switch to
GND (not 5 V) for complete write protection.
To take advantage of 5 V write-capability,
allow for connecting 5 V to V
PP
and
disconnecting 12 V from V
PP
line.
Intel’s SmartVoltage technology is the most
flexible voltage solution in the flash industry,
providing two discrete voltage supply pins: V
CC
for
read operation, and V
PP
for program and erase
operation. Discrete supply pins allow system
designers to use the optimal voltage levels for
their design. This product family, specifically the
28F200BV/CV, and 28F002BV provide program/
erase capability at 5 V or 12 V. The 28F200BV/CV
and 28F002BV allow reads with V
CC
at 3.3 V
±
0.3 V or 5 V. Since many designs read from the
flash memory a large percentage of the time, read
operation using the 3.3 V ranges can provide great
power savings. If read performance is an issue,
however, 5 V V
CC
provides faster read access
times.
For program and erase operations, 5 V V
PP
operation eliminates the need for in system
voltage converters, while 12 V V
PP
operation
provides faster program and erase for situations
where 12 V is available, such as manufacturing or
designs where 12 V is in-system. For design
simplicity, however, just hook up V
CC
and V
PP
to
the same 5 V ± 10% source.
The 28F200/28F002B boot block flash memory
family is a high-performance, 2-Mbit (2,097,152
bit) flash memory family organized as either
256 Kwords of 16 bits each (28F200 only) or
512 Kbytes of 8 bits each (28F200 and 28F002B).
•
Table 1. SmartVoltage Provides Total Voltage Flexibility
Product
Name
28F002BV-T/B
28F200BV-T/B
28F200CV-T/B
Bus
Width
x8
x8 or x16
x8 or x16
3.3 V
±
0.3 V
√
√
√
V
CC
5 V
±
5%
5 V
±
10%
√
√
√
5 V
±
10%
√
√
√
V
PP
12 V
±
5%
√
√
√
5
SEE NEW DESIGN RECOMMENDATIONS
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
