MRCN
Vishay Techno
Thick Film Resistor/Capacitor Networks,
Single-In-Line, Molded SIP
FEATURES
Isolated and ECL terminator schematics
available
Custom schematics available
NP0 or X7R capacitors for line terminator
Wide
operating
temperature
range
(- 55 °C to 125 °C)
Molded epoxy case
Solder coated copper terminals
Solderability per MIL-STD-202 method 208E
Marking resistance to solvents per MIL-STD-202 method 215
Compliant to RoHS Directive 2002/95/EC
STANDARD ELECTRICAL SPECIFICATIONS
RESISTOR CHARACTERISTICS
CAPACITOR CHARACTERISTICS
MODEL SCHEMATIC POWER RESISTANCE RESISTANCE
CAPACITANCE CAPACITANCE
TEMP.
RANGE
TOLERANCE
(1)
COEFF. TYPE
(2)
CAPACITANCE TOLERANCE
(3)
VOLTAGE
RATING
RANGE
± ppm/°C
V
DC
±%
±%
P
70 °C
W
NP0
10
0.20
50 to 1K
1, 2, 5
150
X7R
NP0
MRCN
20
0.20
50 to 1K
1, 2, 5
150
X7R
NP0
30
0.20
50 to 1K
1, 2, 5
150
X7R
Notes
(1)
2 % standard, ± 1 % and 5 % available
(2)
NP0 Capacitors may be substituted for X7R capacitors
(3)
Tighter tolerances available on request
470 pF to 0.1 µF
10, 20
470 pF to 0.1 µF
33 pF to 3900 pF
10, 20
10, 20
50
470 pF to 0.1 µF
33 pF to 3900 pF
10, 20
10, 20
50
33 pF to 3900 pF
10, 20
50
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: MRCN081N101J560KTB (preferred part number format)
M
GLOBAL
MODEL
MRCN
R
PIN
COUNT
C
N
0
8
1
N
1
0
1
J
5
6
0
K
T
B
SCHEMATIC CHARACTERISTIC
1
= 10
2
= 20
3
= 30
N
= NP0
X
= X7R
RESISTANCE
VALUE
2 digit
significant
figure, followed
by a multiplier
101
= 100
220
= 22
102
= 1 k
101
RESISTANCE CAPACITANCE
TOLERANCE
VALUE
F
=1%
G
=2%
J
=5%
(In picofarads)
2 digit significant
figure, followed
by a multiplier
101
= 100 pF
392
= 3000 pF
104
= 0.1 µF
560
CAPACITANCE
TOLERANCE
K
= 10 %
M
= 20 %
TERMINAL
FINISH
T
=
Sn90/Pb10
C
= Sn95.5/
Ag3.9/
Cu0.6
PACKAGING
B
= Bulk
W
= Tray
08
= 8 pin
10
= 10 pin
Historical Part Numbering: MRCN0801101J560KS10 (will continue to be accepted)
MRCN
HISTORICAL
MODEL
08
PIN
COUNT
01
SCHEMATIC
J
RESISTANCE
TOLERANCE
K
CAPACITANCE
TOLERANCE
S10
TERMINAL
FINISH
RESISTANCE
VALUE
CAPACITANCE
VALUE
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 68008
Revision: 09-Mar-11
For technical questions, contact:
te1resistors@vishay.com
www.vishay.com
19
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
