Basic Switch Common Accessories
Separator (Sold Separately)
To ensure a secure insulation distance, or if there are other
metal parts or copper wire installed too close to the Switch, use
the Switch with insulation guard or use a separator purchased
separately to keep the insulation distance.
■List
of models
Appearance
Applicable Switches
V
D3V-01
VX
D2MV
D2RV
D2VW
Thickness (mm)
Model
0.18
SEPARATOR FOR V0.18
Separator
0.25
SEPARATOR FOR V0.25
Separator
SS
SS-P
D2S
D2SW
D2SW-P
0.18
SEPARATOR FOR SS0.18
0.4
SEPARATOR FOR SS0.4
Note. The Separator is made of EAVTC (epoxy alkyd/varnish tetron cloth) and has heat-resistant temperature of
+130°C.
■Dimensions
(Unit: mm)
SEPARATOR FOR V0.18
SEPARATOR FOR V0.25
3
2-3.2 dia. holes
14
8
10.3
±0.1
24
11
22.2
±0.1
38
SEPARATOR FOR SS0.18
SEPARATOR FOR SS0.4
2-2.6 dia. holes
12
+0.28
−0.12
+0.23
7
−0.17
9.5
±0.1
21.6
7
B-149
Basic
Switch
Common Accessories
Basic Switch Common Accessories
Actuator (Sold Separately)
Actuators are supplementary components used when operating
the Switch using cams or dogs or when transmitting mechanical
movements that are not in alignment with the switch plunger.
The VAL models are suitable for cases where a Switch is
operated by a rotary cam or sliding devices with relatively low
operation frequency.
The VAM models are designed to operate in reverse movements
and have high shock and vibration resistance. Since the
Overtravel (OT) of these models is rather large, they can be used
for automatic control or door switches of machining tools.
The VAV models can be used where a small Operating Force
(OF) is required.
These Actuators do not include Switches.
Note. Switches with the
mounting holes shown in
the diagram can be used
except for special
models.
10.3
±0.15
Basic
Switch
Common Accessories
22.2
±0.15
■Dimensions
(Unit: mm)
/ Operating Characteristics
* Model numbers are for the Actuators only.
The value given for operating characteristics are reference values. For operating characteristics of models not listed above, consult your
OMRON sales representative.
●Leaf
Spring Model
VAL
A
21.8
t=0.3, width 4.7*
5.6
Operating characteristics
Operating Force
Releasing Force
In the case of
V-15-1A5
5.1
±0.1
FP
OP
10.3
±0.15
18.2
OF Max. 2.26 N {230 gf}
RF Min. 0.49 N {50 gf}
0.8 mm
0.4 mm
Overtravel
OT Min.
Movement Differential MD Max.
22.2
±0.15
27.8
2-M3×16
*Stainless-steel
lever
2.8
Free Position
FP Max.
17 mm
Operating Position
OP
14.9±0.5 mm
Note. Pin plunger (Designed for models of OF
1.96 N {200 gf} or greater).
●Simulated
Leaf Spring
VAL12
t=0.3*
A
5.8
FP
OP
10.3
±0.15
5.1
18.2
20.6
R2.4
5.6
4.7
Operating characteristics
Operating Force
Releasing Force
In the case of
V-15-1A5
OF Max. 2.26 N {230 gf}
RF Min. 0.49 N {50 gf}
0.8 mm
0.4 mm
Overtravel
OT Min.
Movement Differential MD Max.
2-M3×16
2.8
22.2
±0.15
27.8
*Stainless-steel
lever
Free Position
FP Max.
22.9 mm
Operating Position
OP
20.5±0.8 mm
Note. Pin plunger (Designed for models of OF
1.96 N {200 gf} or greater).
●Roller
Leaf Spring
VAL2
VAL02
A
4.8
dia.×4.8*
20.6
5.6
Operating characteristics
4.8
In the case of
V-15-1A5
Operating Force
Releasing Force
OF Max. 2.26 N {230 gf}
RF Min. 0.49 N {50 gf}
0.8 mm
0.4 mm
FP
OP
10.3
±0.05
5.1
±0.25
18.2
Overtravel
OT Min.
Movement Differential MD Max.
2.8
22.2
±0.08
27.8
2-M3×16
*
VAL2: polyacetal resin roller
VAL02:
Stainless-steel
roller
Free Position
FP Max.
22.6 mm
Operating Position
OP
20.5±0.5 mm
Note. Pin plunger (Designed for models of OF
1.96 N {200 gf} or greater).
Note1. Unless otherwise specified, a tolerance of ±0.4mm applies to all dimensions.
Note2. The operating characteristics are for operation in the A direction ( ).
B-150
Basic Switch Common Accessories
●Long
Hinge Lever
VAV
A
PT
OP
10.3
±0.1
R44.4
t=1, width 4.9*
15.1
3.6
5.2
7.1
20.2
6
Operating characteristics
Operating Force
Releasing Force
OF Max.
RF Min.
In the case of
V-15-1A5
0.34 N {35 gf}
0.04 N {4 gf}
7.6 mm
3.6 mm
4.7 mm
Pretravel
PT Max.
Overtravel
OT Min.
Movement Differential MD Max.
2.8
●Hinge
Wire Lever
VAV-5
PT
OP
A
R50
0.8*
dia.
15.1
3.2
5.6
10.3
±0.1
8
20.3
5.45
Operating characteristics
Operating Force
OF Max.
Pretravel
PT Max.
Overtravel
OT Min.
Movement Differential MD Max.
In the case of
VX-5-1A2
0.03 N {3 gf}
16 mm
2 mm
5 mm
2.8
22.2
±0.1
27.8
2-M3×16
*Stainless-steel
wire
Operating Position
OP
Approx. 16.7 mm
Note. This is designed for model of OF 0.25 N
{25 gf}.
Use in direction where the lever does
not apply its own weight load to the
plunger.
●Hinge
Roller Lever
VAV2
4.8
dia.×4.8*
A
PT
R19
OP
10.3
±0.15
15.1
3.6
5.2
7.2
20.3
Operating characteristics
6
In the case of
V-15-1A5
0.74 N {75 gf}
0.09 N {9 gf}
4.8 mm
1.5 mm
1.2 mm
Operating Force
Releasing Force
OF Max.
RF Min.
Pretravel
PT Max.
Overtravel
OT Min.
Movement Differential MD Max.
2.8
22.2
±0.15
27.8
2-M3×16
*polyacetal
resin roller
Operating Position
OP
18.6±1.6 mm
Note. Pin plunger designed for models of OF
0.98 N {100 gf} or greater.
Use in direction where the lever does
not apply its own weight load to the
plunger.
●Reverse
Long Hinge Lever
VAM
15
R62
A
t=1*
6
5
Operating characteristics
Operating Force
Releasing Force
In the case of
V-15-1A5
5.2
20.3
10.3
±0.15
OP
FP
OF Max. 1.96 N {200 gf}
RF Min. 0.29 N {30 gf}
7mm (reference value)
5mm
Overtravel
OT Min.
Movement Differential MD Max.
2-M3×20
2.8
22.2
±0.15
27.8
*Stainless-steel
lever
Free Position
FP Max.
45 mm
Operating Position
OP
20±9 mm
Note. Not available for D2VW.
●Reverse
Hinge Lever
VAM21
15
R26
5.2
20.3
10.3
±0.15
A t=1*
6
5
Operating characteristics
Operating Force
Releasing Force
In the case of
V-15-1A5
OP
FP
OF Max. 3.53 N {360 gf}
RF Min. 0.69 N {70 gf}
5 mm (reference value)
4 mm
Overtravel
OT Min.
Movement Differential MD Max.
2-M3×20
2.8
22.2
±0.15
27.8
*Stainless-steel
lever
Free Position
FP Max.
30 mm
Operating Position
OP
20±4 mm
Note. Not available for D2VW.
Note1. Unless otherwise specified, a tolerance of ±0.4mm applies to all dimensions.
Note2. The operating characteristics are for operation in the A direction ( ).
B-151
Basic
Switch
Common Accessories
22.2
±0.1
27.8
2-M3×16
*Stainless-steel
lever
Operating Position
OP
Approx. 10.6 mm
Note. Pin plunger designed for models of OF
0.98 N {100 gf} or greater.
Use in direction where the lever does
not apply its own weight load to the
plunger.
Basic Switch Common Accessories
●Reverse
Hinge Modified Lever
VAM-1
15
R46.5
A
R7
t=1*
6
5
Operating characteristics
Operating Force
Releasing Force
In the case of
V-15-1A5
5.2
20.3
10.3
±0.15
OP
FP
OF Max. 2.94 N {300 gf}
RF Min. 0.39 N {40 gf}
5 mm (reference value)
6 mm
Overtravel
OT Min.
Movement Differential MD Max.
Basic
Switch
Common Accessories
2.8
22.2
±0.2
27.8
2-M3×20
*Stainless-steel
lever
Free Position
FP Max.
47 mm
Operating Position
OP
30±5 mm
Note. Not available for D2VW.
●Reverse
Roller Modified Lever
VAM22
15
A 9.5
dia.×4.8*
6
Operating characteristics
R25
OP
FP
5
In the case of
V-15-1A5
Operating Force
Releasing Force
OF Max. 3.53 N {360 gf}
RF Min. 0.69 N {70 gf}
3 mm (reference value)
4 mm
5.2
20.3
10.3
±0.15
Overtravel
OT Min.
Movement Differential MD Max.
2.8
22.2
±0.2
27.8
2-M3×20
*Stainless-steel
roller
Free Position
FP Max.
38 mm
Operating Position
OP
31±3 mm
Note. Not available for D2VW.
●Reverse
Long Hinge Roller Lever
VAM2
R51
15
A
9.5
dia.×4.8*
6
Operating characteristics
Operating Force
Releasing Force
In the case of
V-15-1A5
OF Max. 2.45 N {250 gf}
RF Min. 0.39 N {40 gf}
7 mm (reference value)
6 mm
FP
OP
5.2
20.3
10.3
±0.15
5
Overtravel
OT Min.
Movement Differential MD Max.
Free Position
FP Max.
48 mm
Operating Position
OP
31±6 mm
Note. Not available for D2VW.
22.2
±0.15
27.8
2-M3×20
*Stainless-steel
roller
2.8
Note1. Unless otherwise specified, a tolerance of ±0.4mm applies to all dimensions.
Note2. The operating characteristics are for operation in the A direction ( ).
•
Application examples provided in this document
are
for reference only. In
actual applications,
confirm equipment functions
and safety before using
the product.
•
Consult your OMRON representative
before using
the product
under
conditions which
are
not described in the manual or
applying
the product to nuclear control
systems,
railroad
systems, aviation systems,
vehicles, combustion
systems,
medical equipment,
amusement
machines,
safety
equipment,
and
other
systems
or equipment that may have
a serious
influence on lives
and
property if
used
improperly. Make
sure
that the ratings
and
performance characteristics of the product provide
a
margin of
safety
for the
system
or
equipment,
and be sure
to provide the
system
or equipment with double
safety
mechanisms.
Note: Do not use this document to operate the Unit.
OMRON Corporation
ELECTRONIC AND MECHANICAL COMPONENTS COMPANY
Contact: www.omron.com/ecb
Cat. No. B118-E1-01
0812(0207)(O)
B-152
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
