“Star Board”
LED Pixel Holder
KEY FEATURES
• Design combines thermal and electrical
connections to the hexagonal “Star”
LED board configurations offered by LED
manufacturers such as Philips/Lumileds,
Cree, Osram, Seoul Semiconductor, and
Nichia
• Design allows for versatility in mounting
monochromatic and RGB “Star” LEDs
without the need for solder (Note: RGB
DESCRIPTION
Modular LED assembly holder that can be easily integrated into
standard, direct lighting fixtures
Easy, snap-together solderless thermal and electrical termination
APPLICATIONS
Plug and play capability which easily integrates into LED light
fixtures
Used in: office, residential, or architectural lighting
ELECTRICAL
Operating Current: Up to 2.5 Amps
Operating Voltage: Up to 50VDC
uses 4 wire common anode)
• Consists of a heat sink, locking ring, and
contact carrier
LED Wattage Rating*: 0.5 to 3 Watts with Tyco Electronics heat sink
MECHANICAL
• 3 Watts using standard Tyco Electronics
heatsink* tooled to fit in standard
GU10/MR16 light fixtures
• Design fits into the same envelope as
an MR16 with it’s socket
• Optional Tyco Electronics diffuser lens
available
• Optional Tyco Electronics integral LED
driver available
• Standard 110 FASTON Receptacle quick
connects for easy Class 2 power wiring
• LED Holder allows for replacement of
the star board after installation and can
accommodate star board thicknesses in
the range of 1.0mm to 2.5mm
Number of Positions: 2 contact loading for single-color LEDs and 4
contact loading for full color (RGB) LEDs
Wire Interface: Tyco Electronics 110 FASTON Receptacle
Durability: 10 cycles
Environmental Operating Temperature: -40 to 120 degree C
MATERIALS
Contacts: Copper Alloy
Finish: Tin over Nickel
LED “Star” board: Customer supplied
Contact Carrier and Locking Ring: Plastic (PBT)
Heatsink: Cast Aluminum
STANDARDS & SPECS
UL: UL 8750
Product Specification: 108-2350
Application Specification: 114-13227
* NOTICE: A Proper LED Thermal Management Plan is Required for All High Power LED Applications.
The standard Tyco
Electronics heatsink was tested under 40 degree ambient conditions inside a typical GU10 style semi-enclosed track light
fixture without any forced air cooling using a Philips LUMILEDS LUXEON III LED. Higher or lower wattage LEDs can be
used with this holder if the application conditions are appropriate. The application conditions to be considered include:
ambient temperature, airflow, light fixture design, enclosure volume, holder orientation, thermal interface material, the
selected LED's thermal characteristics/limitations, and other application specific factors. The customer will need to test
their fixture with their selected LED under the expected ambient conditions of the final application to determine if their
complete application meets the LED's junction temperature requirements as specified by the LED manufacturer. If the
LED's junction temperature requirements are exceeded, LED failure or reduced LED lumen maintenance can be expect-
ed. Please contact Tyco Electronics for technical assistance regarding this "Star Board" LED Pixel Holder if there are any
questions about High Power LED Thermal Management.
Tyco Electronics
I “Star Board”
LED Pixel Holder
模拟与混合信号
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
