HLMP-Cx08 Series, HLMP-Cx25 Series
HLMP-Cx27 Series, HLMP-C610
T-1
3
/
4
(5 mm) AlInGaP Lamps
Data Sheet
Description
The HLMP-Cx08, HLMP-Cx25, HLMP-Cx27, and HLMP-C610
series are 5 mm lamps specially designed for applications
requir-ing very high on-axis intensity that is not achiev-
able with a standard lamp. These devices are capable of
producing light output over a wide range of drive currents.
Built using AlInGaP technology, they are well suited for
typical 5 mm TS-AlGaAs lamp applica-tions, and have
significantly SUPERIOR RELIABILITY than most TS-AlGaAs
lamps in wet/hot environments. These lamps come with
clear non-diffused lens and are optically designed to yield
superior light output.
Features
High intensity
General purpose leads
Popular 5 mm diameter
Available in bulk, tape and reel, or ammopack
8° or 25° viewing angles
Choice of colors: Amber or Red
Applications
Indoor/outdoor applications
Small store-front signs
Message panels
Road construction barrier lights
Center high mount stop lights
Spoiler, car decorative lighting
Motorcycle/bicycle warning lights
Device Selection
Typical Viewing
Angle
[1]
(degrees),
2
1/2
8
8
8
Yes
No
8
25
25
25
Yes
25
25
No
25
Luminous Intensity,
Iv (mcd) @ 20 mA
Min.
2900
2600
1000
1000
500
450
500
500
500
500
Part Number
HLMP-C008-U00xx
HLMP-C208-S00xx
HLMP-C608-R00xx
HLMP-C610-R00xx
HLMP-C025-P00xx
HLMP-C225-O00xx
HLMP-C625-P00xx
HLMP-C027-P00xx
HLMP-C627-P00xx
HLMP-C325-P00xx
Standoff
No
Typ.
6000
3000
2000
2000
1000
800
700
1000
700
Color
Red
Amber
Red
Red
Red
Amber
Red
Red
Red
Orange
Dominant
Wavelength
[2]
626
590
635
635
626
590
635
626
635
605
Notes:
1.
1
/
2
is the off-axis angle at which the luminous intensity is half of the axial luminous intensity.
2. The dominant wavelength,
d
, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the
device.
Package Dimensions
HLMP-Cx27
1.07 (0.042)
0.56 (0.022)
6.10 (0.240)
5.46 (0.215)
1.00 (0.040) MAX. EPOXY MENISCUS
1.32 (0.052)
1.02 (0.040)
0.45 SQ. NOM.
(0.018)
5.21 (0.205)
4.70 (0.105)
2.54 NOM.
(0.100)
13.50 (0.53)
13.30 (0.52)
25.40 MIN.
(1.000)
CATHODE
LEAD
1.27 NOM.
(0.050)
9.14 (0.360)
8.36 (0.330)
HLMP-Cx25
6.10 (0.240)
5.46 (0.215)
1.07 (0.042)
0.56 (0.022)
1.00 (0.040) MAX. EPOXY MENISCUS
1.02 (0.004)
MAX. TYP.
5.21 (0.205)
4.70 (0.105)
2.54 NOM.
(0.100)
CATHODE
LEAD
1.27 NOM.
(0.050)
25.40 MIN.
(1.000)
0.45 SQ. NOM.
(0.018)
9.14 (0.360)
8.36 (0.330)
HLMP-C610
0.89 (0.035)
0.64 (0.023)
6.10 (0.240)
5.46 (0.215)
1.00 (0.040) MAX. EPOXY MENISCUS
1.32 (0.052)
1.02 (0.040)
0.45 SQ. NOM.
(0.018)
5.08 (0.200)
4.57 (0.100)
2.54 NOM.
(0.100)
13.55 (0.533)
13.35 (0.525)
25.40 MIN.
(1.00)
CATHODE
LEAD
1.27 NOM.
(0.050)
9.19 (0.362)
8.43 (0.332)
HLMP-Cx08
6.10 (0.240)
5.46 (0.215)
0.89 (0.035)
0.64 (0.023)
1.00 (0.040) MAX. EPOXY MENISCUS
1.02 (0.004)
MAX. TYP.
0.45 SQ. NOM.
(0.018)
5.08 (0.200)
4.57 (0.100)
2.54 NOM.
(0.100)
CATHODE
LEAD
1.27 NOM.
(0.050)
25.40 MIN.
(1.00)
9.19 (0.362)
8.43 (0.332)
2
Part Numbering System
HLMP - C x xx - x x x xx
Mechanical Option
00:Bulk
02: Tape & Reel, Straight Leads
DD: Ammo Pack
Color Bin Options
0: Full Color Bin Distribution
Maximum Iv Bin Options
0: Open (no max. limit)
Minimum Iv Bin Options
Please refer to the Iv Bin Table
Viewing Angle & Standoff Option
08: 8 degrees, without standoff
10: 8 degrees, with standoff
25: 25 degrees, without standoff
27: 25 degrees, with standoff
Color Options
0: AlInGaP Red 626 nm
2: AlInGaP Amber 590 nm
3: AlInGaP Orange 605 nm
6: AlInGaP Red 635 nm
Absolute Maximum Ratings at T
A
= 25°C
Parameter
Peak Forward Current
Average Forward Current
[1]
DC Current
[2]
Reverse Voltage (I
R
= 100
A)
LED Junction Temperature
Operating Temperature Range
Storage Temperature Range
Absolute Maximum
70
30
50
5
110
-40 to +100
-40 to +100
Units
mA
mA
mA
V
°C
°C
°C
Notes:
1. See Figure 2 to establish pulsed operating conditions.
2. Derate linearly from 50°C at 0.5 mA/°C.
3. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED die and
wirebond. It is not recommended that this device be operated at peak currents above the Absolute Maximum Peak Forward Current.
3
Optical/Electrical Characteristics at T
A
=25°C
Symbol
2
1
/
2
Parameter
Included Angle Between Half
Luminous Intensity Points
[1]
Device
HLMP-C008
HLMP-C208
HLMP-C608
HLMP-C025
HLMP-C225
HLMP-C325
HLMP-C625
HLMP-C610
HLMP-C027
HLMP-C627
HLMP-C008
HLMP-C208
HLMP-C608
HLMP-C025
HLMP-C225
HLMP-C325
HLMP-C625
HLMP-C610
HLMP-C027
HLMP-C627
HLMP-C008
HLMP-C208
HLMP-C608
HLMP-C025
HLMP-C225
HLMP-C325
HLMP-C625
HLMP-C610
HLMP-C027
HLMP-C627
Min.
Typ.
[3]
8
8
8
25
25
25
25
8
25
25
626
590
635
626
590
605
635
635
626
635
635
594
650
635
594
611
650
650
635
650
17
20
40
260
Max.
Units
Deg.
Test
Conditions
I
F
= 20 mA
See Note 1
d
Dominant Wavelength
[2]
nm
See Note 2
PEAK
Peak Wavelength
nm
Measurement at Peak
1
/
2
s
C
R
J-PIN
V
F
Spectral Line Halfwidth
Speed of Response
Capacitance
Thermal Resistance
Forward Voltage
HLMP-C008
HLMP-C208
HLMP-C608
HLMP-C025
HLMP-C225
HLMP-C625
HLMP-C610
HLMP-C027
HLMP-C627
5.0
nm
ns
pF
°C/W
2.4
2.6
2.2
2.4
2.6
2.2
2.2
2.4
2.2
V
V
F
= 0; f = 1 MHz
Junction to Cathode Lead
I
F
= 20 mA
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
1.9
V
R
Reverse Breakdown Voltage
V
I
R
= 100 μA
Notes:
1.
1
/
2
is the off-axis angle at which the luminous intensity is half of the axial luminous intensity.
2. The dominant wavelength,
d
, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the
device.
3. Typical specification for reference only. Do not exceed absolute maximum ratings.
4
1.0
C208
C225
RELATIVE INTENSITY
C008
C025
C027
C608
C625
C627
C610
C325
0.5
0
550
600
WAVELENGTH – nm
650
700
Figure 1. Relative intensity vs. wavelength.
RATIO OF MAXIMUM TOLERABLE
PEAK CURRENT TO MAXIMUM
TOLERABLE DC CURRENT
6
5
4
CURRENT – mA
60
50
40
RED
30
20
10
AMBER
3
300
100
100
3 KH
1 KH
Hz
10 K
30 K
2
Hz
Hz
KHz
Hz
z
z
I
PEAK
– MAX.
I
DC
– MAX.
1
1.0
10
100
1000
10,000
0
1.0
1.5
2.0
2.5
3.0
tp – PULSE DURATION – µs
V
F
– FORWARD VOLTAGE – V
Figure 2. Maximum tolerable peak current vs. pulse duration.
Figure 3. Forward current vs. forward voltage.
3.0
RELATIVE LUMINOUS INTENSITY
(NORMALIZED AT 20 mA)
60
FORWARD CURRENT (mA)
2.5
2.0
1.5
1.0
0.5
0
40
Rθ
J-A
= 780°C/W
20
0
20
40
60
0
0
20
40
60
80
100
120
I
F
– DC FORWARD CURRENT – mA
AMBIENT TEMPERATURE (°C)
Figure 4. Relative luminous intensity vs. forward current.
Figure 5. Maximum forward DC current vs. ambient temperature.
5
聊聊、笑笑、闹闹
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
