UNISONIC TECHNOLOGIES CO., LTD
SB160
Preliminary
DIODE
1.0A SCHOTTKY BARRIER
RECTIFIER
DESCRIPTION
The UTC
SB160
is a Schottky Rectifier with high current capacity
and low forward voltage.
The UTC
SB160
is suitable for polarity protection ,low voltage and
high frequency inverters and free wheeling applications
DO-41
FEATURES
* High Current Capability
* Low Forward Voltage
ORDERING INFORMATION
Ordering Number
Lead Free
Halogen Free
SB160L-Z41-R
SB160G-Z41-R
Note: Pin Assignment: A: Anode, K: Cathode
Package
DO-41
Pin Assignment
1
2
K
A
Packing
Tape Reel
www.unisonic.com.tw
Copyright © 2012 Unisonic Technologies Co., Ltd
1 of 2
QW-R601-066.a
SB160
Preliminary
DIODE
ABSOLUTE MAXIMUM RATINGS
(T
A
=25°C
unless otherwise specified.)
PARAMETER
SYMBOL
RATINGS
UNIT
Peak Repetitive Reverse Voltage
V
RRM
60
V
Working Peak Reverse Voltage
V
RWM
60
V
DC Blocking Voltage
V
R
60
V
RMS Reverse Voltage
V
R(RMS)
42
V
Forward Voltage (I
F
=1.0A) (Note 3)
V
FM
0.7
V
Non-Repetitive Peak Forward Surge Current 8.3ms
single half sine-wave superimposed on rated load
I
FSM
40
A
(JEDEC Method)
Average Rectified Output Current (Note 2)
I
O
1.0
A
T
A
= 25°C
0.5
mA
Peak Reverse Current at Rated DC
I
RM
Blocking Voltage (Note 3)
T
A
= 100°C
5.0
mA
Operating Temperature
T
J
-65~+150
°C
Storage Temperature
T
STG
-65~+150
°C
Note: 1. Absolute maximum ratings are those values beyond which the device could be permanently damaged.
Absolute maximum ratings are stress ratings only and functional device operation is not implied.
2. Measured at ambient temperature at a distance of 9.5mm from the case.
3. Short duration test pulse used to minimize self-heating effect.
THERMAL DATA
PARAMETER
Junction to Ambient
SYMBOL
θ
JA
RATINGS
50
UNIT
°C/W
UTC assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or
other parameters) listed in products specifications of any and all UTC products described or contained
herein. UTC products are not designed for use in life support appliances, devices or systems where
malfunction of these products can be reasonably expected to result in personal injury. Reproduction in
whole or in part is prohibited without the prior written consent of the copyright owner. The information
presented in this document does not form part of any quotation or contract, is believed to be accurate
and reliable and may be changed without notice.
UNISONIC TECHNOLOGIES CO., LTD
www.unisonic.com.tw
2 of 2
QW-R601-066.a