Features
LED Driver
●
●
●
●
●
●
●
●
●
3W Class II AC-DC LED Power Supply
350mA to 700mA CC/CV Output
ENEC, UL, RCM and CB Certified
Universal Input Voltage Range
Fused Input and Protected Output
3kVAC Isolation
IP66
Low Cost
3 Year Warranty
LIGHTLINE
AC/DC-Converter
with 3 year Warranty
Description
A compact universal AC input 3W constant current switching power module suitable for driving 1 - 6 high power LEDs.
The output (dual constant voltage / constant current mode) current limit is fixed at 350mA, 500mA or 700mA. At lower
output currents, the output is constant voltage. Connections are via 118mm long flying leads.
Selection Guide
Part
Number
RACD03-350
RACD03-500
RACD03-700
CV Mode
(VDC)
15
11
6
(mA)
0-350
0-500
0-700
(VDC)
2.5-15
2.5-11
2.5-6
CC Mode
(mA)
350
500
700
Efficiency typ.
(%)
72
71
62
3 Watt
Single
Output
Specifications
(typical at 25°C and after warm up time unless otherwise specified )
Input Voltage Range
Rated Power
Input Frequency Range
Output Voltage Range
Inrush Current (<2mS)
Leakage Current
Input Fuse
Input Current
230VAC
240VAC/50Hz
Built-in
350mA Verison
500mA Version
700mA Version
Output Current Accuracy
Minimum Load
Output Ripple
Hold Up Time
Operating Frequency
AC RMS Isolation Voltage (input to output)
Temperature Coefficient
Overload Protection
Short Circuit Protection
Output Overvoltage Protection
Overtemperature Protection
Operating Temperature Range
(free air convection)
Storage Temperature Range
Humidity
IP Rating
(combined Tolerance, Load Regulation and Line Regulation)
Open Circuit Protected
90-264VAC or 120-370VDC
3W nom. / 5W max.
47-63 Hz
2.5 - 15VDC max.
10A max.
0.2mA typ.
T1A
20mA
25mA
38mA
±10%
1 LED
0.1Ap-p max.
18ms min.
66kHz typ.
3.75kV / 1 minute typ., 3kV / 1 minute min.
±0.02%/°C typ.
120% typ.
Continuous Current Limit
Zener Diode Clamp
Shutdown, Automatic restart after cooling down
Ambient Temperature
-20°C to +50°C
Case Temperature
85°C max.
-25°C to +85°C
95% RH max.
IP66
continued on next page
RoHS
2011/65/EU
6/6
E340696
UL-8750 Certified
EN-61347 Certified
ENEC Certified
RACD03
Please Read Application Notes
www.recom-international.com
REV: 2/2013
L-19
LIGHTLINE
AC/DC-Converter
Specifications
cont.
(typical at 25°C and after warm up time unless otherwise specified )
PCB Material
Case Material
Weight
Packing Quantity
Designed to meet Standards
Electrical Lighting, EMC Emissions
Limits for Harmonics Emissions
EMC Compatibilty: Flicker and Voltage Variations
Electrical Lighting: EMC Immunity
Class II Power Supply Safety
FCC
LED Lighting Safety (E340696)
RCM (U21376)
ENEC General Safety
ENEC Safety of AC supplied Control Gear for LED Modules
25°C ambient
AC Input Live
AC Input Neutral
LED +
LED -
RACD03
Series
Plastic Resin with Fibreglass (UL94V-0)
Plastic
45g
10pc
EN55015:2006 + A1: 2007 + A2:2009
EN 61000-3-2:2006
EN 61000-3-3:2006
EN 61547:1995 + A1:2000
UL1310
FCC18A
UL8750
AS/NZS 61347.1:2002, IEC 61347-2-13
EN 61347-1: 2008
EN 61347-2-13: 2006
Certifications
Design Lifetime
Connections
>20 x 10³ hours in operation
Brown Wire, AWG18, 172mm + 5-7mm stripped and tinned
Blue Wire, AWG18, 172mm + 5-7mm stripped and tinned
Red Wire, AWG18, 128mm + 5-7mm stripped and tinned*
Black Wire, AWG18, 128mm + 5-7mm stripped and tinned*
* Do not connect or disconnect the LED load while the converter is on. This may damage the LED or reduce its life.
Characteristics
Constant Current (CC) and Constant Voltage (CV) Graph
15V
CV
RACD03-350
RACD03
Output Voltage
11V
CV
RACD03-500
CC
CC
6V
3V
CV
RACD03-700
CC
350mA
500mA
700mA
Output Current
Nominal Current Limits
Package Style and Pinning
3rd angle
projection
Wire Connections
1.3+0.1
-
T
C
5.0
38.1
46.1
52.1
29.6
4.0
Wire
Brown
Blue
Red
Black
Function
VAC in (L)
VAC in (N)
LED+
LED-
23.1
2 Mounting screws are included
Tc = Case Temperature Measuring Point
Tolerance
XX = +1mm/ -0.5mm
XX.X = +/- 0.25mm
L-20
REV: 2/2013
www.recom-electronic.com