MASY-007028-000100
Synthesizer, SMT for RFID
Covering all UHF Bands
Features
•
•
•
•
•
•
•
•
•
Fully Integrated VCO, PLL, Loop Filter
Includes TCXO with <10 PPM Stability
Low Phase Noise
High Performance, Low Cost
Covers US, European and Japanese RFID Bands
Lead-Free Land Grid Array Package
Tape and Reel Packaging Available
260°C Reflow Compatible
RoHS* Compliant
Rev. V2
Description
This synthesizer design integrates a high perform-
ance VCO, PLL IC, and discrete loop filter into a
surface mount package. A high stability frequency
reference is also included. This SMT package pro-
vides electrical shielding, easy PCB assembly, and
repeatable performance.
Applications
These synthesizers are well suited for applications
where small size and high performance is required.
This synthesizer is specifically targeted for the
RFID market in the United States, European, and
Japanese bands. This synthesizer can also be
used for other applications in these frequency
ranges.
Functional Block Diagram
Ordering Information
1, 4
Model No.
MASY-007028-0001TR
MASY-007028-000100
MASY-007028-0001TB
MASY-007028-SW01TB
MASY-007028-0001TR
MASY-007028-000100
MASY-007028-0001TB
MASY-007028-SW01TB
MASY-007028-0002TR
MASY-007028-000200
MASY-007028-0002TB
MASY-007028-SW02TB
1.
2.
3.
4.
1
Band
US
US
US
US
European
European
European
European
Japanese
Japanese
Japanese
Japanese
Frequency
902 - 928 MHz
902 - 928 MHz
902 - 928 MHz
902 - 928 MHz
865 - 868 MHz
865 - 868 MHz
865 - 868 MHz
865 - 868 MHz
950 - 956 MHz
950 - 956 MHz
950 - 956 MHz
950 - 956 MHz
Package
Tape and Reel
Bulk
Sample Board
2
Sample Board
3
Tape and Reel
Bulk
Sample Board
2
Sample Board
3
Tape and Reel
Bulk
Sample Board
2
Sample Board
3
The US and European bands share the same part. The listings are separated to illustrate the different frequencies.
This is the synthesizer installed on a sample board. This does not include the evaluation software or the test cable.
This is the synthesizer installed on a sample board. It also includes software (including a brief manual on how to use the software), and
a cable to interface with a Windows™ based PC having a parallel port.
Reference Application Note M513 for reel size information.
* Restrictions on Hazardous Substances, European Union Directive 2002/95/EC.
ADVANCED:
Data Sheets contain information regarding a product M/A-COM Technology Solutions
•
North America
Tel: 800.366.2266 •
Europe
Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
•
India
Tel: +91.80.4155721
•
China
Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY:
Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASY-007028-000100
Synthesizer, SMT for RFID
Covering all UHF Bands
Electrical Specifications – US & European Bands
5
T
A
= +25°C, Z
o
= 50
Ω,
V
DD1
= 3.3V, V
DD2
= 3.3V
Parameter
Frequency Range
Frequency Stability
RF Output Power
Phase Noise
Rev. V2
Test Conditions
US Band
European Band
Over T
op6
At 25°C
Over T
op6
SSB at 100 Hz offset from carrier
SSB at 1 KHz offset from carrier
SSB at 10 KHz offset from carrier
SSB at 100 KHz offset from carrier
SSB at 200 KHz offset from carrier
SSB at 1 MHz offset from carrier
SSB at 2 MHz offset from carrier
SSB at 3 MHz offset from carrier
From 10 kHz to 100 kHz using brick wall filter
2nd
3rd and higher
1.25 * Fo
1.5 * Fo
Sub-harmonics
Phase comparison frequency
( ± 50 KHz)
Reference breakthrough ( ± 16 MHz)
Over Fout, PFD frequency = 50 KHz,
Loop bandwidth = 5 KHz
Measured to within ± 1 kHz
Measured to within ± 10 Hz
Units
MHz
MHz
ppm
dBm
dBm
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
deg rms
dBc
dBc
dBc
dBc
dBc
dBc
dBc
Min
902
865
-
+4.0
+3.0
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Typ
-
-
-
-
-72
-75
-80
-112
-121
-135
-140
-142
0.34
-35
-35
-80
-85
-80
-65
-80
Max
928
868
10
+6.2
+7.5
-
-
-
-
-
-
-
-
-
-20
-25
-60
-60
-60
-
Phase Jitter
Harmonic Suppression
Spurious Suppression
(Non-Harmonic)
Spurious Suppression
(Non-Harmonic)
Frequency Lock Time
us
us
V
mA
V
mA
Ω
dB
KHz
MHz
-
-
+3.00
-
+3.00
-
-
-
-
902.750
700
800
+3.30
45
+3.30
25
50
20
50
-
-
-
+3.45
60
+3.45
35
-
-
-
927.250
VDD1
7
IDD1
10
VDD2
8
IDD2
RF Impedance
Isolation
Step Size
Output Frequencies
Recommended Operating Condition
Recommended Operating Condition
Recommended Operating Condition
Recommended Operating Condition
At RX_LO and TX_LO
9
Between RX_LO and TX_LO
Over T
op6
For US RFID readers, there are 50 equally spaced frequen-
cies. The minimum and maximum frequencies are to the right.
There are 49 steps with a step size of 500 KHz.
For European RFID readers, there are 15 equally spaced fre-
quencies. The minimum and maximum frequencies are to the
right. There are 14 steps with a step size of 200 KHz
MHz
865.100
-
867.900
PLL Programming
3-wire serial CMOS in accordance with Analog Devices ADF4360-7.
2
ADVANCED:
Data Sheets contain information regarding a product M/A-COM Technology Solutions
•
North America
Tel: 800.366.2266 •
Europe
Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
•
India
Tel: +91.80.4155721
•
China
Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY:
Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASY-007028-000100
Synthesizer, SMT for RFID
Covering all UHF Bands
Electrical Specifications – Japanese Band
5
:
T
A
= +25°C, Z
o
= 50
Ω,
V
DD1
= 3.3V, V
DD2
= 3.3V
Parameter
Frequency Range
Frequency Stability
RF Output Power
Phase Noise
Rev. V2
Test Conditions
Japanese Band
Over T
op6
At 25°C
Over T
op6
SSB at 100 Hz offset from carrier
SSB at 1 KHz offset from carrier
SSB at 10 KHz offset from carrier
SSB at 100 KHz offset from carrier
SSB at 200 KHz offset from carrier
SSB at 1 MHz offset from carrier
SSB at 2 MHz offset from carrier
SSB at 3 MHz offset from carrier
From 10 kHz to 100 kHz using brick wall filter
2nd
3rd and higher
1.25 * Fo
1.5 * Fo
Sub-harmonics
Phase comparison frequency
( ± 200 KHz)
Reference breakthrough ( ± 16 MHz)
Over Fout, PFD frequency = 200 KHz,
Loop bandwidth = 5 KHz
Measured to within ± 1 kHz
Measured to within ± 10 Hz
Units
MHz
ppm
dBm
dBm
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
deg rms
dBc
dBc
dBc
dBc
dBc
dBc
dBc
Min
952
-
+4.0
+3.0
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Typ
-
-
-
-74
-76
-81
-113
-120
-134
-136
-142
0.34
-35
-35
-80
-85
-80
-75
-80
Max
954
10
+6.2
+7.5
-
-
-
-
-
-
-
-
-
-20
-25
-60
-60
-60
-
-
Phase Jitter
Harmonic Suppression
Spurious Suppression
(Non-Harmonic)
Spurious Suppression
(Non-Harmonic)
Frequency Lock Time
us
us
V
mA
V
mA
Ω
dB
KHz
MHz
-
-
+3.00
-
+3.00
-
-
-
-
952.200
700
800
+3.30
45
+3.30
20
50
20
200
-
-
-
+3.45
60
+3.45
35
-
-
-
953.800
VDD1
7
IDD1
10
VDD2
8
IDD2
RF Impedance
Isolation
Step Size
Output Frequencies
Recommended Operating Condition
Recommended Operating Condition
Recommended Operating Condition
Recommended Operating Condition
At RX_LO and TX_LO
9
Between RX_LO and TX_LO
Over T
op6
For Japanese RFID readers, there are 9 equally spaced
frequencies. The minimum and maximum frequencies are to the
right. There are 8 steps with a step size of 200 KHz.
PLL Programming
5.
6.
7.
8.
9.
10.
3
3-wire serial CMOS in accordance with Analog Devices ADF4360-7.
All specification limits are indicated values @ 25°C and apply over Fout unless otherwise indicated.
Top = -30°C to +70°C operating temperature.
VDD1 is the bias for the TCXO, VCO, and the synthesizer.
VDD2 is the bias for the amplifier.
Opposite port is terminated in 50 ohms.
IDD1 includes approximately 10 mA which drives an optional external Lock Detector LED.
ADVANCED:
Data Sheets contain information regarding a product M/A-COM Technology Solutions
•
North America
Tel: 800.366.2266 •
Europe
Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
•
India
Tel: +91.80.4155721
•
China
Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY:
Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASY-007028-000100
Synthesizer, SMT for RFID
Covering all UHF Bands
Pin Configuration
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Rev. V2
Function
GND
GND
GND
GND
RX_LO
GND
GND
TX_LO
GND
GND
VDD1
11
GND
GND
GND
GND
GND
GND
GND
GND
GND
Pin No.
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
Function
GND
GND
GND
GND
CLK
DATA
LE
VDD1
11
Absolute Maximum Ratings
12,13
Parameter
VDD1 to GND
VDD2 to GND
CLK, DATA, LE, MUXOUT
Operating Temperature
Storage Temperature
Absolute Maximum
-0.3V to +3.9V
-0.3V to +6.0V
-0.3V to VDD1 + 0.3V
-30°C to +70°C
-40°C to +125°C
MUXOUT
CE
GND
VDD1
11
GND
GND
VDD2
GND
GND
GND
GND
GND
12. Exceeding any one or combination of these limits may cause
permanent damage to this device.
13. M/A-COM does not recommend sustained operation near
these survivability limits.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Silicon and Gallium Arsenide Integrated Circuits
are sensitive to electrostatic discharge (ESD) and
can be damaged by static electricity. Proper ESD
control techniques should be used when handling
these devices.
11. Pins 11, 28, and 32 are not tied together on the synthesizer.
They all must be tied together on the PC Board
4
ADVANCED:
Data Sheets contain information regarding a product M/A-COM Technology Solutions
•
North America
Tel: 800.366.2266 •
Europe
Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
•
India
Tel: +91.80.4155721
•
China
Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY:
Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
MASY-007028-000100
Synthesizer, SMT for RFID
Covering all UHF Bands
Recommended PCB Configuration
14,15,16
Rev. V2
14. Corner locators are needed for manual placement and are strongly recommended.
15. Soldermask should be line to line with the pads on the bottom of the part.
16. Soldermask should be cleared 15 mils outside the corner locators. This ensures that they are easily visible.
5
ADVANCED:
Data Sheets contain information regarding a product M/A-COM Technology Solutions
•
North America
Tel: 800.366.2266 •
Europe
Tel: +353.21.244.6400
is considering for development. Performance is based on target specifications, simulated results,
•
India
Tel: +91.80.4155721
•
China
Tel: +86.21.2407.1588
and/or prototype measurements. Commitment to develop is not guaranteed.
Visit www.macomtech.com for additional data sheets and product information.
PRELIMINARY:
Data Sheets contain information regarding a product M/A-COM Technology
Solutions has under development. Performance is based on engineering tests. Specifications are
typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make
Commitment to produce in volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
无线连接
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
