电子工程世界电子工程世界电子工程世界

关键词

搜索

型号

搜索

6000-0DC3-31001

产品描述1550 nm Externally Modulated Transmitter
文件大小582KB,共7页
制造商EMCORE
官网地址http://www.emcore.com/
下载文档 全文预览

6000-0DC3-31001概述

1550 nm Externally Modulated Transmitter

文档预览

下载PDF文档
Medallion 6000 Series 1550 nm
Externally Modulated Transmitter
DATASHEET | DECEMBER 2011
FIBER OPTICS
The L-type/D-type/S-type/F-type/N-type Medallion 6000 Series
This product line is a family of state-of-the-art high performance 1550 nm
externally modulated CATV fiber optic transmitters optimized for varying network
applications. Packaged in convenient 1RU housing, this line of optical transmitters
couples high optical output powers, up to 11.0 dBm, with low optical line width
resulting in unmatched performance. The optical modulator, combined with
proprietary pre-distortion circuitry, provides superior CTB and CSO performance
with SBS suppression levels of greater than 21 dBm. Advanced features such as
built in field adjustable SBS control and electronic dispersion compensation allow
these transmitters to be quickly optimized in the field for any link or application
without the need to procure specifically tuned transmitters. This affords the system
designer a level of flexibility previously unknown in the CATV market place.
The L-type series are designed as a high performance solution for applications
where the simultaneous transport of CATV and SAT-IF FM signals is required.
The SAT-IF signals can be applied anywhere in the 950 to 2800 MHz band.
The D-type series are designed as a low cost, high performance solution for
applications where the required fiber length is in the range of 20 to 50 kilometers.
Advanced, high power, DFB laser technology allows these transmitters to be
fielded without the use of EDFAs.
The S-type series transmitters are designed to be the most versatile model within
the Medallion 6000 series family. They can easily be configured to meet most
HFC network solutions requiring link lengths in the range of 50 to 70 kilometers
with one EDFA as well as links utilizing multiple EDFA’s.
The H-type series transmitters are optimized for single EDFA fiber links in the 70
to 90 kilometer range. These transmitters take advantage of our advanced fiber
dispersion compensation circuitry to provide exceptional CATV performance.
The F-type series transmitters are intended for use in FTTx and RFoG
architecture designs requiring high quality transmission over varying transmission
lengths and EDFA output powers. These transmitters successfully support very
high optical launch powers while controlling the detrimental effects of Stimulated
Brillouin Scattering (SBS), group velocity dispersion (GVD), and self phase
modulation (SPM).
The N-type series transmitters are intended for use in node-splitting architecture
designs requiring cost effective DWDM transmission over medium length fiber
distances.
Applications
High Performance Supertrunking Links
High Power Distribution Networks
Redundant Ring Architectures
FTTx Networks
RFOG Applications
SAT-IF Transport
DWDM Node Splitting
Features
Single or Dual Optical Outputs
QAM Loading to 1003 MHz
Dual Power Supplies, Redundant &
Hot Swappable
Front Panel RF Test Point
SNMP Control Interface
WEB GUI
Vacuum Fluorescent Status Display
OMI / RF Gain Adjustment
AGC Select: CW, Video, Manual
(No AGC)
Industry Leading Field Adjustable
SBS Suppression
Field Adjustable Electronic
Dispersion Compensation (EDC)
| REV 2011.12
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
mems加速度传感器使用说明
本人新手,想问一下,mems加速度传感器具体怎么使用呢?我需要测泥土里面一段铁链的受拉形态,本人非电气专业,需详细步骤,跪谢{:1_146:} ...
小霞123456 MEMS传感器
请前辈帮忙介绍入门学习电子工程的基础书
如题 本人脱产大专会计毕业,但对电子工程感兴趣,准备跨专业自学。报的自考本科。无奈看不懂。想从基础的学起。不知入门方向。请前辈们帮忙介绍下电子工程专业的入门书籍。 万分感谢! ...
zb801732 单片机
STM32F407:网络远程--控制4路开关+1路数据采集
本帖最后由 chaoweidianzi 于 2015-7-9 13:13 编辑 硬件框架:STM32F407VET6+LAN8720 软件框架:LWip-1.4.1+UCOS_2.92 程序源码:205457 实验目的:利用上位机软件,通过网络,远程的控制 ......
chaoweidianzi stm32/stm8
求购HID-USB-to-IR接近感应传感器参考设计开发板
大家好,最近想学习一下红外传感器的使用,看到一款开发板比较合适(HID-USB-to-IR接近感应传感器参考设计开发板https://bbs.eeworld.com.cn/thread-320966-1-1.html),该板曾经在本论坛团购过 ......
anning865 淘e淘
TMS320F28335项目开发记录
CCS开发环境已经为我们封装好了许多片内外设寄存器的结构体,我们只需要包含相应的官方的头文件就可以使用了,那么它的内部具体是如何实现的呢?下面来一个典型的例子:1.使用结构体和联合体A. ......
Jacktang DSP 与 ARM 处理器
关于DSPbuilder仿真的问题
请问在matlab的simulink中进行DSPbuilder设计时,仿真的时候要调用modelsim仿真,但出现这个错误:# could not read "d:\softsetup\quartusii\quartus/libraries/vhdl/altera//alt_cusp80_packa ......
yuechenping FPGA/CPLD

 
EEWorld订阅号

 
EEWorld服务号

 
汽车开发圈

 
机器人开发圈

About Us 关于我们 客户服务 联系方式 器件索引 网站地图 最新更新 手机版

站点相关: 大学堂 TI培训 Datasheet 电子工程 索引文件: 952  1833  1618  294  1709  20  37  33  6  35 

器件索引   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

北京市海淀区中关村大街18号B座15层1530室 电话:(010)82350740 邮编:100190

电子工程世界版权所有 京B2-20211791 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号 Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved