1
Message to Customers
This Product Guide is the official TDK multilayer ceramic capacitor product line up for 2012. The
purpose of this document is to communicate our MLCC products and services so that you will
completely understand the full TDK product offering as well as all available services and resources.
A table of contents is provided below to assist you in locating your material of interest. I would also
like to point out an exhaustive listing of all new part numbers is provided at the end of the guide.
This material is updated semi-annually and further supplemented by the contents on the web page,
www.tdk.com. I invite you to regularly reference this document and/or tdk.com for the most current
product news, information and resources.
Respectfully,
Steve Maloy
Director of MLCC Product Marketing and Development
steve.maloy@us.tdk.com / 847.390.4377
www.tdk.com
29
17
Automotive Application // CGA Series
25
High Temperature // C Series
Soft Termination // C Series
Mega Cap // CKG Series
General Application // C Series
Mid Voltage // C Series
Flip Type // C Series
Extended Life // CGJ Series
High Voltage // C Series
High Q // C Series
Open Mode // C Series
19
©TDK Corporation of America – Contents are subject to change without notice.
Serial Design // CEU Series
23
Conductive Epoxy // C Series
15
41
Ultra Low Inductance // CLL Series
3
21
27
37
45
Cap Array // CKC Series
Feed Through // CKD Series
11
Controlled ESR // CER Series
39
43
47
49
2
TDK MLCC PRODUCT LINE
General Application
Mid Voltage
High Voltage
• Wide range of case size and superior dimension precision
• Available in EIA class 1 and 2 dielectrics up to 50V
• Unique design allows for higher voltage in smaller case size
• Available in 100V, 250V, 450V, and 630V
• Advance design provides improved withstanding voltage
• Available rating up to 3000V
• Stable temperature characteristics up to 150ºC
• Highly precise temperature performance (±7.5%) up to 125º C
• Design with higher Q factor than standard capacitors
• Excellent attenuation and high self resonance frequency (SRF)
• Flipped geometry provides lower inductance than standard capacitor
• Special design allows for adequate high frequency current to IC
• Unique design allows for increase resistance to mechanical bending
• Improved performance in vibration and electrical stresses
• Improved bending resistance and temperature cycle performance
• Termination technology available for most case sizes including arrays
• AgPdCu termination for conductive glue mounting
• Improved mechanical/thermal strength when used with conductive glue
• Unique design allows for specified “controlled” ESR
• Same no-hassle mounting method as standard 2-terminal components
• ESR is controlled without affecting the ESL
• 2 series-connected capacitors in one body
• Improved bending resistance and temperature cycle performance
• Ultra high reliability design for automotive battery line applications
• Qualified to CDF AEC Q-200 automotive testing standard
• Manufactured using matured process for guaranteed performance
• Available in C0G, X7R and X8R temperature characteristics
• Extensive testing to ensure higher reliability and longer life
• Reliability tests based on MIL-STD requirements
• Guaranteed TC Bias and Hot IR performance
• Allows for reduction of PCB space and mounting time
• Unique electrode design reduces crosstalk
• Also available in soft termination for higher reliability performance
• Optimized for noise bypass with signal and power source circuits
• Can be used for meeting EMC requirements
• Ideal for use at higher frequencies due to low parasitic inductance
• Advance design for twice the capacitance on single footprint
• Improved vibration and thermal/mechanical stress performance
• Lower ESR and ESL than ALU and TA capacitor
• Unique internal structure allows cancelation of magnetic fields to reduce
equivalent series inductance
• Eight sided terminal electrode design in one capacitor
• 01005 ~ 2220 / C0G, SL, X5R, X6S, X7R, X7S, Y5V
• 4V ~ 50V / up to 100 µF
• 0402 ~ 2220 / C0G, X6S, X7R, X7S, X7T
• 100V ~ 630V / up to 15 µF
• 1808 ~ 1812 / C0G, X7R, X7S
• 1000V ~ 3000V / up to 10 nF
• 0402 ~ 1210 / X8R
• 16V ~ 100V / up to 10 µF
• 0201 / C0G
• 25V / up to 20 pF
• 0204 ~ 0612 / X5R, X6S, X7R, X7S
• 4V ~ 50V / up to 10 µF
• 0805 ~ 2220 / X7R, X8R
• 16V ~ 630V / up to 22 µF
• 0805 ~ 3025 / X7R, X7S, X7T
• 16V ~ 630V / up to 100 µF
• 0402 ~ 1210 / C0G, X7R, X8R
• 25V ~ 100V / up to 10 µF
• 0603 ~ 0805 / X5R
• 4V ~ 10V / up to 10 µF
• 0603 ~ 0805 / X7R
• 50V / up to 100 nF
• 0402 ~ 2220 / C0G, X5R, X7R, X7S, X7T, X8R
• 6.3V ~ 630V / up to 47 µF
• 0402 ~ 1206 / C0G, X7R
• 6.3V ~ 50V / up to 10 µF
• CKCN27 ~ CKCA43 / C0G, X5R, X7R
• 6.3V ~ 50V / up to 2.2 µF
• 0402 ~ 1206 / up to 125ºC temperature range
• 6.3V ~ 50V / up to 22 µF
• CKGxxK ~ CKGxxN / X5R, X7R, X7S, X7T
• 16V ~ 630V / up to 100 µF
• 0603 ~ 0805 / X7R, X7S
• 4V ~ 10V / up to 4.7 µF
C
High Temperature
High Q
Flip Type
Open Mode
Soft Termination
Conductive Epoxy
CER
CEU
CGA
CGJ
CKC
CKD
CKG
CLL
Controlled ESR
Serial Design
Automotive
Application
Extended Life
2-in-1 Array
4-in-1 Array
Feed Through
Mega Cap
Ultra Low
Inductance
©TDK Corporation of America – Contents are subject to change without notice.
C SERIES |
General Application
TDK C series offers high capacitance MLCC achieved
through precision technologies by enabling the use of
multiple thinner ceramic dielectric layers. TDK advanced
manufacturing process offers MLCC with monolithic structure
and superior mechanical strength as well as a high level of
reliability. Composed of only ceramics and base metals,
these
capacitors
provide
extremely
dependable
performance, exhibiting virtually no degradation even when
subjected to temperature extremes. Low stray capacitance
ensures high conformity with nominal values, thereby
simplifying the circuit design process. Owning to their low
ESR and excellent frequency characteristics, these products
are optimally suited for a variety of application.
L
B
T
B
W
3
L
(mm)
0.40
0.60
1.00
1.60
2.00
3.20
3.20
4.50
5.70
W
(mm)
0.20
0.30
0.50
0.80
1.25
1.60
2.50
3.20
5.00
T max
(mm)
0.20
0.30
0.50
0.80
1.25
1.60
2.50
3.20
2.80
Case Code
C0402/01005
C0603/0201
C1005/0402
C1608/0603
C2012/0805
L
W
T
B
Body Length
Body Width
Body Height
Terminal Width
C3216/1206
C3225/1210
C4532/1810
C5750/2220
Part Number Description
TEMPERATURE CHARACTERISTICS
RATED VOLTAGE (DC)
PACKAGING STYLE
INTERNAL CODES
C3225
X7S
1H
106
K
T
½½½½
SERIES NAME & DIMENSION CODE
CAPACITANCE TOLERANCE
NOMINAL CAPACITANCE (pF)
Features:
TDK’s proprietary internal electrode structure
Wide capacitance range up to 100µF
Available voltage rating of 4V to 50V
Superior mechanical strength and reliability
Low ESR characteristic
Easy mounting due to no polarity
Applications:
General electronic equipment
Mobile communication equipment
Power supply circuit
Office automation equipment
TV/LED displays
Servers/PCs/Notebooks/Tablets
Test and measurement equipment
Hybrid ICs, etc.
Decoupling
Smoothing
Charge pump
Basic Design Construction Multi-layer Capacitor
TERMINATION
ELECTRODE
DIELECTRIC
©TDK Corporation of America – Contents are subject to change without notice.
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
