Provides rodent resistance for direct-buried applications
Flexible, craft-friendly buffer tubes
Facilitate easy routing in closures
SZ-stranded, loose tube design
Isolates fibers from installation and environmental rigors
and facilitates mid-span access
Dielectric central strength member
No preferential bend and requires no bonding or ground-
ing
Medium-density polyethylene jacket
Makes cable rugged and durable while being flexible and
easy to strip
ALTOS
®
gel-free, double-jacket, single-armored cables
are rugged, armored cables designed for direct-buried
installation while suitable for duct and aerial (lashed)
installation. The loose tube design provides stable perfor-
mance over a wide temperature range and is compatible
with any telecommunications-grade optical fiber.
Standards
Design and Test Criteria
ANSI/ICEA S-87-640
Telcordia GR-20
RDUP PE-90
Polyethylene (PE)
Outer Jacket
Corrugated Steel
Armor
Dielectric Central
Element
Buffer
Tube
Ripcord
Fiber
Polyethylene (PE)
Inner Jacket
Water-Swellable
Tape
Water-Swellable
Tape
ALTOS Gel-Free, Double-Jacket, Single-Armored
Cables, 72 Fibers
| Photo PIM0541
Family Spec Sheet 0001_NAFTA_AEN
Page 1 | Revision date 2014-08-01
ALTOS Gel-Free, Double-Jacket, Single-Armored
Cables, 72 Fibers
| Photo PIM1440
ALTOS
®
Gel-Free, Double-Jacket, Single-
Armored Cables, 12-288 Fibers
Corrugated Steel
Armor
Ripcord
Water-Swellable
Tape
Polyethylene (PE)
Inner Jacket
Fiber
Water-Swellable
Tape
Buffer
Tube
Water-Swellable
Tape
Dielectric Central
Element
Polyethylene (PE)
Outer Jacket
ALTOS Gel-Free, Double-Jacket, Single-Armored
Cables, 288 Fibers
| Photo PIM0546
ALTOS Gel-Free, Double-Jacket, Single-Armored
Cables, 288 Fibers
| Photo PIM1445
Specifications
Temperature Range
Storage
Installation
Operation
-40 °C to 70 °C (-40 °F to 158 °F)
-30 °C to 70 °C (-22 °F to 158 °F)
-40 °C to 70 °C (-40 °F to 158 °F)
*
Note: Corning recommends storing cable in a proper temperature environment prior to installation to allow the cable temperature to meet installation tempera-
ture range specifications for best installation results.
Max. Tensile Strength, Short-Term
Max. Tensile Strength, Long-Term
2700 N (600 lbf)
890 N (200 lbf)
Mechanical Characteristics Cable
Fiber Count
Number of
Tube Positions
6
8
12
Number of
Active Tubes
1-6
8
12
Weight
Nominal Outer
Diameter
14.3 mm
(0.56 in)
16 mm
(0.63 in)
19.7 mm
(0.78 in)
Min. Bend
Radius Instal-
lation
215 mm
(8.4 in)
240 mm
(9.4 in)
296 mm
(11.6 in)
Min. Bend
Radius Ope-
ration
143 mm
(5.6 in)
160 mm
(6.3 in)
197 mm
(7.8 in)
12 - 72
96
144
179 kg/km
(120 lb/1000 ft)
219 kg/km
(147 lb/1000 ft)
318 kg/km
(213 lb/1000 ft)
Family Spec Sheet 0001_NAFTA_AEN
Page 2 | Revision date 2014-08-01
ALTOS
®
Gel-Free, Double-Jacket, Single-
Armored Cables, 12-288 Fibers
Mechanical Characteristics Cable
Fiber Count
Number of
Tube Positions
18
24
Number of
Active Tubes
16 - 18
24
Weight
Nominal Outer
Diameter
19.9 mm
(0.78 in)
22.2 mm
(0.87 in)
Min. Bend
Radius Instal-
lation
299 mm
(11.8 in)
333 mm
(13.1 in)
Min. Bend
Radius Ope-
ration
199 mm
(7.8 in)
222 mm
(8.7 in)
192 - 216
288
312 kg/km
(209 lb/1000 ft)
384 kg/km
(257 lb/1000 ft)
Chemical Characteristics
RoHS
Free of hazardous substances according to RoHS 2002/95/
EG
Transmission Performance
Multimode
Fiber Core Diameter
(
µm
)
Fiber Category
Fiber Code
Performance Option Code
Wavelengths
(
nm
)
Maximum Attenuation
(
dB/km
)
Serial 1 Gigabit Ethernet
(
m
)
Serial 10 Gigabit Ethernet
(
m
)
Min. Overfilled Launch (OFL)
Bandwidth
(
MHz*km
)
Minimum Effective Modal
Bandwidth (EMB)
(
MHz*km
)
62.5
OM1
K
30
850/1300
3.4/1.0
300/550
33/-
200/500
220/-
50
OM2
T
31
850/1300
3.0/1.0
750/500
150/-
700/500
950/-
50
OM3
T
80
850/1300
3.0/1.0
1000/600
300/-
1500/500
2000/-
50
OM4
T
90
850/1300
3.0/1.0
1100/600
550/-
3500/500
4700/-
Family Spec Sheet 0001_NAFTA_AEN
Page 3 | Revision date 2014-08-01
ALTOS
®
Gel-Free, Double-Jacket, Single-
Armored Cables, 12-288 Fibers
Single-mode
Fiber Name
Fiber Category
Fiber Code
Performance Option Code
Wavelengths
(
nm
)
Maximum Attenuation
(
dB/km
)
Typical Attenuation*
(
dB/km
)
Fiber Name
Fiber Category
Fiber Code
Performance Option Code
Wavelengths
(
nm
)
Maximum Attenuation
(
dB/km
)
Typical Attenuation*
(
dB/km
)
SMF-28e+
®
fiber
G.652.D
E
00
1310/1383/1550
0.35/0.35/0.25
0.33/0.33/0.19
SMF-28
®
ULL
G.652
P
19
1310/1383/1550
0.33/-/0.19
0.31/-/0.17
SMF-28e+
®
fiber
G.652.D
E
01
1310/1383/1550
0.4/0.4/0.3
0.33/0.33/0.19
LEAF
®
G.655
F
01
1310/1383/1550
-/-/0.25
-/-/0.19
SMF-28e+
®
LL
G.652.D
L
22
1310/1383/1550
0.34/0.34/0.22
0.32/0.32/0.18
SMF-28
®
Ultra**
ClearCurve
®
XB**
G.652.D/G.657.A1 G.652.D/G.657.A1
Z
22
1310/1383/1550
0.34/0.34/0.22
0.32/0.32/0.18
H
01
1310/1383/1550
0.4/0.4/0.3
0.35/0.35/0.20
*
Typical attenuation values match the attenuation values listed in the optical fiber specifications. See
www.corning.com/opticalfiber
for Corning optical fiber
specifications. Better attenuation performance options are available for some fiber and cable types. Contact Customer Care for additional fiber options.
*
* SMF-28
®
Ultra and ClearCurve
®
XB fiber deliver up to 10x better macrobend loss performance compared to the G.652.D standard and up to 33 percent better
macrobend loss performance than the G.657.A1 standard for 10mm radii bends.
Family Spec Sheet 0001_NAFTA_AEN
Page 4 | Revision date 2014-08-01
ALTOS
®
Gel-Free, Double-Jacket, Single-
Armored Cables, 12-288 Fibers
Ordering Information |
Note: Contact Customer Care at 1-800-743-2675 for other options.
1) Cable outer diameter may change. Example: 48 F cable with 6 fibers per tube will require 8 active buffer and have an OD like a standard 96 F cable.
Corning Optical Communications LLC • PO Box 489 • Hickory, NC 28603-0489 USA
ABI Research最近评选并公布了全球超高频无源和高频无源 RFID芯片的前十大制造商。 前十大超高频无源芯片制造商是: 前十大高频无源芯片制造商是: 超高频的得奖名单并不出人意外,因为实际上似乎总是前三家公司获得大订单。ABI分析家 Mike Liard称,ABI很容易就评选出 Alien、Avery,和 Raflatac为全球...[详细]
2008年7月9日,欧司朗光电半导体率先推出发光二极管光线数据文件的互联网访问平台,是全球第一家提供该类互联网资源的 LED 制造商。这些光线文件不仅描述 LED 光线的发射模式,而且还包含发射点坐标、发射方向、光线强度和波长等信息。欧司朗的互联网信息资源涵盖包括红外发光二极管 (IRED) 在内的几乎所有 LED 产品组合。透过这平台,客户们不论白天或黑夜,随时都可以获取最新的数据,这无疑为他...[详细]
便携式医疗设备的特殊性决定了它们应该是对用户友好的、必须工作在无菌环境下,并且空间占用小、耗能低。 同时,便携式医疗设备还需要足够的计算能力以便处理医疗数据,能够连接到无线或有线接口以便记录和发送数据。从设计人员的角度考虑,上述需求需要低功耗的单片机(MCU)和数字信号控制器(Digital Signal Controller,DSC)。 正是有了嵌入式处理器,设计人员才有可能设...[详细]