REVISION BS
DO NOT
SCALE FROM
THIS PRINT
.156 3.96 REF
.033 0.84 REF
.361 9.17 REF
"A" REF
C
"C" SPCS. @ .0500= "D"
.0500 1.270 (TYP)
C
L
.033 0.84
REF
No OF POSITIONS
-10, -15,
**-19,
-20
-25, -30, -40, -50
(PER ROW)
SEAF-XX-XX.X-XX-XX-X-A-XX-K-TR
TAPE & REEL
K-DOT
(SEE SHT 2, FIG 3 )
(SEE NOTE 7)
OPTION
****-LP: LATCH POST OPTION
(SEE SHT 4, FIG 8 )
(ONLY AVAILABLE WITH -05.0
LEAD STYLE, -04, -06, -08 & -10 ROW)
(-K OPTION NOT AVAILABLE ON -10
OR -15 POSITION)
***** -RP: RETENTION PIN
(SEE SHT 4, FIG 9)
(ONLY AVAILABLE WITH -05.0
LEAD STYLE, 6, 8 & 10 ROWS)
-PP: POLARIZATION PIN
(SEE SHT 4, FIG 10)
(ONLY AVAILABLE WITH -05.0
LEAD STYLE, 6, 8 & 10 ROWS)
ALIGNMENT PINS
(SEE NOTES 6 & 14)
"A"
08
LEAD STYLE
-05.0: .199[5.05] HEIGHT
-06.0: .238[6.05] HEIGHT
-06.5: .258[6.55] HEIGHT
*** -07.5: .297[7.54] HEIGHT
(SEE TABLE 1)
PLATING SPECIFICATION
-S: SELECTIVE GOLD (30µ”) IN CONTACT AREA,
MATTE TIN ON TAIL (USE NEW-SUB-C-209-XX.X-S-X)
-L: LIGHT GOLD (10µ”) IN CONTACT AREA,
MATTE TIN ON TAIL (USE NEW-SUB-C-209-XX.X-L-X)
-SM: SELECTIVE GOLD (30µ”) IN CONTACT AREA,
MATTE TIN ON TAIL (USE NEW-SUB-C-209-XX.X-S-X)
C .423 10.74
REF
C
L
.200 5.08
REF
SEE NOTE 17
"B" REF
SEAF-XX-XX.X-08-A
C "F" REF
"A"
01
'C'
.050 1.27 REF
.050 1.27 (TYP)
"C" SPCS. @ .0500= "D"
C
.034 0.86 REF
.040 1.02
REF
.044 1.12
REF
"G" REF
SOLDER COMPOSITION & STYLE
C
-1: 63% TIN / 37% LEAD
CHARGE TAIL
(USE NEW-SUB-C-209-XX.X-X-1)
-2: 95.5% TIN/3.8% SILVER/.7%
COPPER
CHARGE TAIL
* = NOT TOOLED.
(USE NEW-SUB-C-209-XX.X-X-2)
= 10 POSITION ONLY AVAILABLE IN 4 ROW.
= ONLY AVAILABLE WITH -05.0 BODY HEIGHT, -10 ROW.
AVAILABLE IN -04 ROW -05.0 LEAD STYLE
= ONLY AVAILABLE WITH -05.0 AND -06.5 BODY HEIGHT AND 4 ROW.
TOOLED IN -07.5 (NOT ENGINEERING APPROVED)
** = ONLY AVAILABLE WITH -06.5 BODY HEIGHT,
AND -06 ROW.
*** = ONLY AVAILABLE WITH 30 POS & 4 ROW.
**** = ONLY AVAILABLE WITH -05.0 BODY HEIGHT,
-04, -06, -08 & -10 ROW.
***** = NOT RELEASED FOR PRODUCTION.
■
= 14 ROW ONLY AVAILABLE IN -06.5 LEAD STYLE AND -40 POS.
ROWS
-04: 4 ROWS (SEE SHT 5, FIG 11)
-05: 5 ROWS (SEE SHT 3, FIG 5)(SEE NOTE 18)
-06: 6 ROWS (SEE SHT 3, FIG 4)
-08: 8 ROWS (SEE SHT 1, FIG 1)
-10: 10 ROWS (SEE SHT 2, FIG 2)
■
-14: 14 ROWS (SEE SHT 5, FIG 12)
.044 1.12 REF
"E" REF
-08: 8 ROW
(SEAF-20-05.0-XX-08-1-A-XX-K-TR SHOWN)
(SOME CENTER FEATURES REMOVED FOR CLARITY)
NOTES:
1.
C
REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE: 0.50 LBS.
3. NOTE DELETED.
4. 5 ROW SOLDER TAILS ARE NOT SYMMETRICAL WITH BODY WIDTH - DIM .321 [8.15], (SEE SHEET 3, FIG. 5).
5. WHEN APPLICABLE, DIMENSION C12 MUST BE MEASURED USING INSPECTION FIXTURE AT-1817-836-1
FOR -04 ROW, OR AT-1817-836-2 FOR -06, -08 & -10 ROW. USE CO-AU-WI-2003-M FOR PROCESS.
6. WITHOUT -A AVAILABLE FOR EXISTING CUSTOMERS ONLY AS OF REVISION Y.
7. K-DOT WILL BE SUPPLIED WHETHER OR NOT -K IS SPECIFIED.
8. TAPE & REEL WILL BE SUPPLIED WHETHER OR NOT -TR IS SPECIFIED.
9. FOR QUANTITIES UP TO 49 PIECES, NO LEADER, TRAILER, OR REEL WILL BE SUPPLIED.
FOR QUANTITIES OF 50 - 124 PIECES, NO LEADER OR TRAILER WILL BE SUPPLIED.
SPLICES MAY BE PRESENT.
10. ATTACH LABEL "SEAX-0001" TO EACH TAPE & REEL PACKAGE.
11. SOLDER CHARGE VOLUME IS .00000891 CUBIC INCHES (REF).
12. NOTE DELETED.
13. SLOT ORIENTATION MUST BE AS SHOWN.
14. A-PINS STANDARD ON ALL BODIES, EXCEPT 6 x 19, SEE SHEET 1, FIG. 1
A-PINS ARE OPTIONAL ON 6 x 19, SEE SHEET 4, FIG. 7
15. MAXIMUM ROW TO ROW VARIATION .003[0.08], MEASURED FIRST & LAST POSITIONS ONLY, ALL ROWS.
16. NOTE DELETED.
17. NON-FUNCTIONAL VOIDING IN PLASTIC BODY TO BE AT SAMTEC'S DISCRETION.
18. THESE OPTIONS AVAILABLE AS ASO (APPLICATION SPECIFIC OPTIONS) ONLY. PLEASE CONTACT SAMTEC
FOR MORE INFORMATION.
FIG 1
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
ANGLES
.XX: .01[0.3]
2
.XXX: .005[0.13]
.XXXX: .0020[0.051]
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
PROPRIETARY NOTE
*
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
MATERIAL:
C
INSULATOR: LCP, COLOR: BLACK
CONTACT : COPPER ALLOY
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 PITCH SOCKET ARRAY ASSEMBLY
SHEET
1
OF
5
SEAF-XX-XX.X-XX-XX-X-A-XX-K-TR
F:\DWG\MISC\MKTG\SEAF-XX-XX.X-XX-XX-X-A-XX-K-TR-MKT.SLDDRW
BY:
BRATCHER 05/27/2004
REVISION BS
.035 0.90
REF
C
.035±.005 0.89±0.13 (TYP)
C
L
.017 0.42
REF
'B'
NEW-SUB-C-209-XX.X-X-X
C
SEE TABLE 6
"K" REF
C
.002±.003 0.05±0.08
(SEE NOTES 5 & 15)
.050 1.27 REF (TYP)
SOLDER CHARGE
C
L
C
L
DETAIL 'C'
SCALE 6 : 1
FIG 2
SECTION "A"-"A"
SCALE 6 : 1
C "J"
C
"H" (TYP)
(SEE TABLE 7)
-10: 10 ROW
(SAME AS FIG 1, EXCEPT AS SHOWN)
(SEAF-20-05.0-XX-10-1-A-XX-K-TR SHOWN)
(SOME CENTER FEATURES REMOVED FOR CLARITY)
10
.0175±.0030 0.445±0.076
C
DETAIL 'B'
SCALE 8 : 1
.523 13.28
REF
.461 11.71
REF
C
L
.100 2.54
REF (TYP)
.300 7.62
REF
SEAF-XX-XX.X-10-A
"N" .020[0.51]
01
C
**
"L"
DOT APPLICATOR-KAPTON TAPE: USE
-04 ROW: K-DOT-.256-.375-.005
(SAME AS FIG 3, EXCEPT AS SHOWN)
C
L
-04 ROW ONLY
C
"N" .020[0.51]
C
L
-K: POLYIMIDE PAD
(SEAF-20-05.0-XX-08-1-A-XX-K-TR SHOWN)
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SOME CENTER FEATURES REMOVED FOR CLARITY)
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
FIG 3
*
PROPRIETARY NOTE
*
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
"M" .020[0.51]
C
DOT APPLICATOR-KAPTON TAPE: USE
-05/-06 ROW: K-DOT-.256-.375-.005
-08 ROW: K-DOT-.325-.450-.005
-10 ROW: K-DOT-.404-.500-.005
-14 ROW: K-DOT-.404-.500-.005
"L"
DO NOT SCALE DRAWING
.050 PITCH SOCKET ARRAY ASSEMBLY
SHEET
2
OF
5
"F"
(INCLUDES K-DOT)
SHEET SCALE: 2:1
BY:
BRATCHER 05/27/2004
F:\DWG\MISC\MKTG\SEAF-XX-XX.X-XX-XX-X-A-XX-K-TR-MKT.SLDDRW
SEAF-XX-XX.X-XX-XX-X-A-XX-K-TR
REVISION BS
-06: 6 ROW
(SAME AS FIG 1, EXCEPT AS SHOWN)
(SEAF-20-05.0-XX-06-1-A-XX-K-TR SHOWN)
(SOME CENTER FEATURES REMOVED FOR CLARITY)
C
L
FIG 4
06
.050 1.27
REF (TYP)
.323 8.20
REF
.261 6.63
REF
C
L
.100 2.54 REF
-01
SEAF-XX-XX.X-06-X-A
"A" REF
05
.050 1.27
REF (TYP)
C
L
.323 8.20 REF
.258 6.55 REF
(NON-SYM)
SEAF-XX-XX.X-05-X-A
01
.100 2.54 REF
"D"
C
L
.323 8.20 REF
(SEE NOTE 4)
"D"
.025 0.64
(SEE NOTE 4)
.075 1.91
(SEE NOTE 4)
SECTION "D"-"D"
C
-05: 5 ROW
(SAME AS FIG 4, EXCEPT AS SHOWN)
(SEAF-20-05.0-XX-05-1-A-XX-K-TR SHOWN)
(SOME CENTER FEATURES REMOVED FOR CLARITY)
FIG 5
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
PROPRIETARY NOTE
*
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 1:0.333333
.050 PITCH SOCKET ARRAY ASSEMBLY
SHEET
3
OF
5
SEAF-XX-XX.X-XX-XX-X-A-XX-K-TR
BY:
BRATCHER 05/27/2004
F:\DWG\MISC\MKTG\SEAF-XX-XX.X-XX-XX-X-A-XX-K-TR-MKT.SLDDRW
REVISION BS
06 ROW x 19 POS
(ONLY AVAILABLE -06.5 LEADSTYLE & -06 ROW)
(SEAF-20-06.5-XX-06-1-XX-K-TR SHOWN)
(SAME AS FIGS 1 & 4 EXCEPT AS SHOWN )
(SOME CENTER FEATURES REMOVED FOR CLARITY)
06
FIG 7
.105 2.67
REF
.324 8.23
REF
C
L
SEE NOTE 13
C
WT-69-01-T
C
.070 1.78
(TYP)
01
*****-RP OPTION
(SEAF-20-05.0-XX-06-1-A-RP-K-TR SHOWN)
(SOME CENTER FEATURES REMOVED FOR CLARITY)
(SAME AS FIG 7 EXCEPT AS SHOWN )
(-RP OPTION VALID FOR SEAR MATE ONLY)
(ONLY AVAILABLE WITH -05.0 LEAD STYLE 6, 8 & 10 ROW)
FIG 9
.190 4.83
REF
"A" REF
.070 1.78
REF
.258 6.55 REF
.304 7.72
REF
NEW-SUB-C-209-06.5-X-X
C
WT-69-02-N
.010 0.25
(TYP)
SEAF-XX-05.0-XX-A-LP
06
SEE OPTIONS
.323 8.20
REF
01
C
L
.221 5.61 REF
-PP OPTION
(SEAF-20-05.0-XX-06-1-A-PP-K-TR SHOWN)
(SOME CENTER FEATURES REMOVED FOR CLARITY)
(SAME AS FIG 8 EXCEPT AS SHOWN )
(-PP OPTION VALID FOR SEAR MATE ONLY)
(ONLY AVAILABLE WITH -05.0 LEAD STYLE 6, 8 & 10 ROW)
FIG 10
"P" REF
C
C
L
"Q"
+.005
- .010
C
L
WT-43-01-T
C
L
.610 15.49
REF
.186 4.72 (TYP)
C
.070 1.78 (TYP)
C
-LP OPTION
(SEAF-20-05.0-XX-06-1-A-LP-K-TR SHOWN)
(SOME CENTER FEATURES REMOVED FOR CLARITY)
(SAME AS FIG 6 EXCEPT AS SHOWN )
(-LP OPTION REQUIRED FOR SEAC MATE ONLY)
(ONLY AVAILABLE WITH -05.0 LEAD STYLE -04, -06, -08 & -10 ROW)
"R"±.005
.117 2.97 REF (TYP)
.117 2.97
REF (TYP)
FIG 8
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
PROPRIETARY NOTE
*
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 1:0.333333
.050 PITCH SOCKET ARRAY ASSEMBLY
05/27/2004
SHEET
4
OF
5
BY:
BRATCHER
SEAF-XX-XX.X-XX-XX-X-A-XX-K-TR
F:\DWG\MISC\MKTG\SEAF-XX-XX.X-XX-XX-X-A-XX-K-TR-MKT.SLDDRW
REVISION BS
.223 5.66
REF
.161 4.09
REF
04
.100 2.54 REF
C
L
.050 1.27 REF
01
.076 1.93 REF
.229 5.82
REF
"F"
.053 1.35 REF
.297 7.54
REF
.035 0.90 REF
NEW-SUB-C-209-07.5-X-X
"F"
-04: 4 ROW
(SEAF-30-07.5-XX-04-1-A-XX-K-TR SHOWN)
(SOME CENTER FEATURES REMOVED FOR CLARITY)
(SAME AS FIG 1 EXCEPT AS SHOWN )
FIG 11
SECTION "F"-"F"
14
.100 2.54
REF (TYP)
.723 18.36
REF
.661 16.79
REF
C
L
.500 12.70
REF
01
-14: 14 ROW
(SEAF-40-06.5-XX-14-1-A-XX-K-TR SHOWN)
(SOME CENTER FEATURES REMOVED FOR CLARITY)
(SAME AS FIG 1 EXCEPT AS SHOWN )
F:\DWG\MISC\MKTG\SEAF-XX-XX.X-XX-XX-X-A-XX-K-TR-MKT.SLDDRW
FIG 12
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
PROPRIETARY NOTE
*
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail info@SAMTEC.com
code 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 1:0.333333
.050 PITCH SOCKET ARRAY ASSEMBLY
SEAF-XX-XX.X-XX-XX-X-A-XX-K-TR
SHEET
5
OF
5
BY:
BRATCHER 05/27/2004
工作这点儿事
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
