Q SERIES Ø19mm (.748") Panel Mount LED Indicators
Distinctive features and specification
Features
• 19mm panel mounting LED indicator
• 10mm colored diffused epoxy lens or 10mm water clear super bright LEDs
• Plated brass bezel finished in bright chrome,
black chrome or satin grey and moulded polycarbonate rear body
•
•
•
•
Prominent, extra prominent, recessed and flush bezel styles
Custom engraving available
2VDC – 220VAC
(2.8 x 0.8) solder lug/faston terminals, pins or (200mm long) wire terminations
IP67 sealing option (EN60529)
• Supplied with fixing nut and spring washer
Q19_VOY1603R1US
NB: UL Recognized Component
TECHNICAL SPECIFICATIONS
Voltage
02 (No Resistor)
6VDC
12VDC
24VDC
28VDC
110VAC
220VAC
Operating Voltage
(Min to Max)
1.8 to 3.3VDC
5.4 to 6.6VDC
10.8 to 13.2VDC
21.6 to 26.4VDC
25.2 to 30.8VDC
99 to 121VAC
207 to 253VAC
Operating Current
(Typical All Types)
20mA max*
20mA
20mA
20mA
20mA
6mA
3mA
Max Reverse Voltage:
5V
Viewing Angle:
30–100°
(dependant on model)
Life Expectancy:
100,000 hours
Temperature Range:
–40 to +85°C
(operating & storage)
Torque:
75cNm
Ø 19.00 +0.15/-0.0
22,00 0,866
AF
3,00 0,118
PANEL CUTOUT
M19 x 1,0 THREAD
Flush
Standard LED Intensity
Prominent and Recessed
Forward Voltage
HE Red
80mcd
2.0V
10mcd
Green
60mcd
2.2V
5mcd
4mcd
Yellow
50mcd
2.1V
100mcd
Blue
540mcd
3.3V
150mcd
White
1000mcd
3.3V
Orange
80mcd
2.0V
200mcd
Bi-color (Typical) (Red/Green)
15/15mcd
2.0V/2.2V
14/10mcd
Tri-color (Typical) (Red/Green/Yellow)
60/50/50mcd
2.0V/2.2V/2.1V
15/10/30mcd
Bi-color - The color is changed by reversing the polarity of the supply voltage.
Tri-color - The indicator has red and green LEDs, when both connected yellow is produced.
Super Bright LED
HE Red
Green
Yellow
Blue
White
Orange
Hyper Bright LED
HE Red
Green
Yellow
Orange
Prominent and Recessed
17,000mcd
11,000mcd
4,000mcd
2,500mcd
4,400mcd
2,800mcd
Prominent and Recessed
2,800mcd
2,200mcd
1,300mcd
850mcd
Flush
2000mcd
680mcd
350mcd
250mcd
250mcd
300mcd
Flush
800mcd
250mcd
250mcd
200mcd
Forward Voltage
2.2V
3.5V
2.3V
3.3V
3.3V
2.1V
Forward Voltage
2.1V
3.2V
2.0V
2.1V
Luminous intensity will be reduced with lower operating current.
Note: The operating voltage must not be exceeded by more that 10% as this will result in reduced life expectancy.
The company reserves the right to change specifications without notice.
* Customer to supply resistor for desired operating current.
Luminous intensity is measured at 20mA on a discrete LED unless otherwise stated.
Luminous intensities and color shades of white LEDs may vary within a batch.
LED characteristics are dependent upon environmental conditions. Therefore published data should be considered nominal.
APEM
www.apem.com
1
Q SERIES Ø19mm (.748") Panel Mount LED Indicators
Technical Drawings
2,8x0,8[0,11x0,031]
22,00
0,866
22,00
0,866
4,75 0,187
13,50 0,531
33,75 1,329
10,00 0,394
9,35 0,368
4,75 0,187
13,50 0,531
28,75 1,132
7,00 0,276
5,50 0,217
M19x1,0
22,00
,866
22,00
0,866
4,75 0,187
13,50 0,531
200,0+/-10
[7,874+/-0,393]
28,75 1,132
4,75 0,187
13,50 0,531
17,50 0,689
REAR EPOXY WIRES
M19x1,0
M19x1,0
SHORT BODY PINS
0,50 0,020
1,25 0,049
1,25 0,049
SHORT BODY WIRES
M19x1,0
22,00
0,866
22,00
0,866
4,75 0,187
13,50 0,531
17,50 0,689
200,0+/-10
[7,874+/-0,393]
4,75 0,187
13,50 0,531
19,75 0,778
16,00 0,630
14,50 0,571
22,00
0,866
4,75 0,187
13,50 0,531
19,75 0,778
200,0+/-10
[7,874+/-0,393]
2,8x0,8[0,11x0,031]
22,00
0,866
22,00
0,866
1,85 0,073
13,50 0,531
33,75 1,329
10,00 0,394
9,35 0,368
13,50 0,531
28,75 1,132
0,50 0,020
1,25 0,049
M19x1,0
22,00
0,866
1,85 0,073
13,50 0,531
200,0+/-10
[7,874+/-0,393]
28,75 1,132
1,85 0,073
13,50 0,531
17,50 0,689
18,25 0,719
16,75 0,659
REAR EPOXY WIRES
M19x1,0
M19x1,0
SHORT BODY PINS
0,50 0,020
1,25 0,049
1,25 0,049
SHORT BODY WIRES
M19x1,0
22,00
0,866
22,00
0,866
1,85 0,073
13,50 0,531
17,50 0,689
200,0+/-10
[7,874+/-0,393]
22,00
0,866
1,85 0,073
13,50 0,531
19,75 0,778
14,50 0,571
16,00 0,630
1,85 0,073
13,50 0,531
19,75 0,778
200,0+/-10
[7,874+/-0,393]
2
www.apem.com
1,25 0,049
M19x1,0
22,00
,866
WIRES
REAR EPOXY PINS
0,50 ,020
1,25 0,049
1,25 0,049
7,00 0,276
5,50 0,217
FLUSH BEZEL
SOLDER LUG/FASTONS
M19x1,0
0,50 0,020
1,25 0,049
1,25 0,049
M19x1,0
WIRES
REAR EPOXY PINS
0,50 ,020
1,25 0,001
1,25 0,049
PROMINENT BEZEL
M19x1,0
SOLDER LUG/FASTONS
PINS
16,75 0,659
18,25 0,719
1,85 0,073
PINS
APEM
Q SERIES
Ø19mm (.748") Panel Mount LED Indicators
Technical Drawings
M19x1,0
22,00
0,866
2,8X0,8 TAB
[0.110x0.031]
22,00
0,866
M19x1,0
5,00 0,197
13,50 0,531
33,75 1,329
10,00 0,394
9,35 0,368
5,00 0,197
13,50 0,531
28,75 1,132
22,00 0,866
18,30 ,720
M19x1,0 THREAD
5,00 0,197
13,50 0,531
200,00+/-10
[7.874+/-0.393]
28,75 1,132
5,00 0,197
13,50 0,531
17,50 0,689
M19x1,0 THREAD
22,00 0,866
22,00 0,866
18,30 0,720
REAR EPOXY WIRES
SHORT BODY PINS
2,50 0,098
1,25 0,049
0,50 0,020
M19x1,0 THREAD
SHORT BODY WIRES
M19x1,0 THREAD
5,00 0,197
13,50 0,531
17,50 0,689
200,00+/-10
[7.874+/-0.393]
5,00 0,197
13,50 0,531
19,75 0,778
16,00 0,630
14,50 0,571
5,00 0,197
13,50 0,531
19,75 0,778
200,00+/-10
[7.874+/-0.393]
EXTRA PROMINENT BEZEL
22,00
0,866
2,8x0,8[0,11x0,031]
22,00
0,866
5,75 0,226
13,50 0,531
32,75 1,289
10,00 0,394
9,35 0,368
5,75 0,226
13,50 0,531
27,75 1,093
7,00 0,276
5,50 0,217
0,90 0,035
M19x1,0
22,00
,866
WIRES
M19x1,0
22,00
0,866
5,75 0,226
13,50 0,531
200,0+/-10
[7,874+/-0,393]
27,75 1,093
5,75 0,226
13,50 0,531
16,50 0,650
0,90 0,035
REAR EPOXY WIRES
M19x1,0
0,90 0,035
M19x1,0
SHORT BODY PINS
0,50 0,020
1,25 0,049
1,25 0,049
0,90 0,035
SHORT BODY WIRES
M19x1,0
22,00
0,866
22,00
0,866
5,75 0,226
13,50 0,531
16,50 0,650
200,0+/-10
[7,874+/-0,393]
5,75 0,226
13,50 0,531
18,75 0,738
16,00 0,630
14,50 0,571
22,00
0,866
5,75 0,226
13,50 0,531
18,75 0,738
200,0+/-10
[7,874+/-0,393]
APEM
www.apem.com
0,50 0,020
0,90 0,035
REAR EPOXY PINS
0,50 ,020
1,25 0,001
1,25 0,049
0,90 0,035
SOLDER LUG/FASTONS
M19x1,0
0,90 0,035
0,50 0,020
2,50 0,098
1,25 0,049
M19x1,0 THREAD
SQ
WIRES
REAR EPOXY PINS
0,50 0,020 SQ
2,50 0,098
1,25 0,049
RECESSED BEZEL
SOLDER LUG/FASTONS
PINS
7,00 0,276
5,50 0,217
18,25 0,719
16,75 0,659
PINS
18,25 0,719
16,75 0,659
3
Q SERIES Ø19mm (.748") Panel Mount LED Indicators
Custom options
CUSTOM MARKING
Cable length & connector
For custom cable length and
connectors please contact
APEM
CUSTOM ENGRAVING
Suffix the part number with legend code
Code
Symbol
Description
Code
-0AJ
-097
-027
-026
-021
High Beam
Low Beam
Rear Fog
Front Fog
Windscreen
Wiper
Windscreen
Washer
Ventilator
Fan
Turn
Signal
Side Lights
-041
-013
-018
-0BU
-0K6
Symbol
Description
Horn
Hazard
Warning
Heating
Brake Test
Arrow
Code
-0EL
-0SB
-0UB
-0ST
-0EU
Symbol
Description
Engine
Coil
Seat Belt
USB
Connection
Steam
ECU
ECU
-022
-023
-0AH
-0AG
-0GP
-020
ABS
Battery
Oil Can
Windscreen
Heating
ABS
-0AD
-012
-040
Side Step
Air Con
Engine
Boot/Trunk
Release
-098
-086
-0BR
Some common codes are listed above, for your custom requirements please contact APEM.
Unless specified standard engraving with white infill will be supplied.
4
www.apem.com
APEM
Q SERIES Ø19mm (.748") Panel Mount LED Indicators
Overview
STANDARD OPTIONS
The Q19 Series is available with a range of standard options, to specify your LED, simply choose one option from each
column. An example is shown below.
Q
SERIES
Q
19
MOUNTING
HOLE
19 = Ø19mm
P
BEZEL
STYLE
Metal
P = Prominent
R = Recess
F = Flush
EP = Extra
Prominent
1
TERMINALS
1 = Solder Lug/
Fastons
(2.8 x 0.8)
2 = Pins
3 = Wires
4 = Rear epoxy
Pins
5 = Rear epoxy
Wires
6 = Short body
Pins
7 = Short body
Wires
B
BEZEL FINISH
Metal
C = Bright Chrome
B = Black Chrome
G = Satin Grey
XX
TYPE OF
ILLUMINATION
XX = Fixed Light
KK = Flashing Light
(12 - 28VDC)
YY = Bi-color
ZZ = Tri-color
G
LED COLOR
R = Red
G = Green
Y = Yellow
B = Blue
W = White
O = Orange
12
VOLTAGE
02 = no resistor
*
06 = 6VDC
12 = 12VDC
12A = 12VAC/DC
24 = 24VDC
24A = 24VAC/DC
28 = 28VDC
E
SEALING
(Blank) = Unsealed
E = IP67
HR = Hyper Bright Red
HG = Hyper Bright Green
HY = Hyper Bright Yellow
HO = Hyper Bright Orange
28A = 28VAC/DC
110 = 110VAC
220 = 220VAC
Example Q19P1BXXR12E
Ø19mm, prominent bezel, solder lug
terminals, black chrome finish, fixed light,
red, 12VDC LED, IP67 panel sealed
SR = Super Bright Red
SG = Super Bright Green
SY = Super Bright Yellow
SB = Super Bright Blue
SW = Super Bright White
RG = Red/Green
RY = Red/Yellow
GY = Green/Yellow
RYG = Red/Yellow/Green
• Gold Faston terminal denotes Anode (+), silver terminal denotes Cathode (-)
• Standard wire length is 200mm, 22AWG UL1007, red wire denotes Anode (+), black wire denotes Cathode (-)
for other wire lengths consult APEM
• For LEDs with alternate voltages consult APEM
• Bi-color LEDs, by connecting the gold Faston (+) one color is produced,
by reversing the supply voltage another color is produced – Bi-colors are available up to 28VDC
• Take care when soldering to the Faston terminals (recommended solder temperature 300°C - 3 sec)
• Short body pins and wires are only available up to 28VDC
• The Tri-color LED has red and green LEDs when both are connected yellow is produced
• Standard Tri-color Faston terminals are two Anodes (+) and one Cathode (-)
• Tri-color wires are one red (+) and one green (+) Anode and one black (-) Cathode
• Tri-color pins are center (–) Cathode, shortest (+) Anode pin green, longest (+) Anode pin red
• Maximum panel thickness 11mm
• We recommend using Hyperbright orSuperbright LEDs for use at 110VAC and 220VAC
• For multi-voltage options please consult APEM
* = For resistorless versions (02) please refer to the forward voltage on page 1
APEM
www.apem.com
5
模拟电子
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
