- Fully automated test and calibration facility (auto data
logging and monitoring, networked access to data and
test status)
Applications
• CAPEX – eliminates O-E-O conversions
• OPEX – remote planning and re-configuration
• Faster time to revenue
JDSU's Agile Optical Switch family provides the broadest portfolio of ROADM
solutions designed to match the requirements of major market segments. They
are the building blocks of Agile Optical Networks and provide the flexibility to
remotely reconfigure any or all wavelengths, thereby reducing time-to-service,
simplifying the network and streamlining planning and management. This results
in significant Opex and Capex reductions and faster time to revenue. In addition,
they enable the cost effective creation and deployment of more complex
network architectures.
The Wavelength Selective Switch is an N-port module composed of a hermetically
sealed optics block and control electronics. The optics block is based on the highly
successful free space optics platform developed for the Wavelength Blockers,
hence maintaining a common platform solution while evolving to the WSS.
The WSS is used to dynamically attenuate, block switch and route wavelengths
independently. Any wavelength/wavelengths can be routed from any port/ports to
any other port/ports in any order, resulting in a colorless solution, that is highly
flexible and requires no pre-planning.
• Wavelength routing/grooming
- Ring inter-connect and
add/drop capability
• Dynamic bandwidth management
NORTH AMERICA
:
800 498-JDSU (5378)
WORLDWIDE
:
+800 5378-JDSU
WEBSITE
:
www.jdsu.com
WAVELENGTH SELECTIVE SWITCH (WSS) 5X1
2
Functional Diagram
(This diagram shows the functionality of the Wavelength Selective Switch only.
Diagram does not resemble actual device.)
Common
Port 1
Port 2
Port 3
Port 4
Port 5
Wavelength
Selective Switch
.
.
.
DPRAM Interface
& RS232
Power Supply
Module Dimensions
(Specifications in mm unless otherwise noted. Fixed labels within 10 cm of
connector tip.)
WAVELENGTH SELECTIVE SWITCH (WSS) 5X1
3
Specifications
Parameter
Optical
Frequency range
Wavelength spacing
Number of controllable channels
Maximum input power at common
Maximum input power single channel
Passband
Insertion loss
Insertion loss ripple
over ±10 GHz passband
over ±10 GHz passband
Isolation, over ±10 GHz passband
Attenuation range
Attenuation resolution
Group delay ripple (GDR)
Extinction ratio (crosstalk),
over ±10 GHz stop band
PDL
Condition
Minimum
Maximum
191.55 THz
-
-
±12.5 GHz
-
0 to 10 dB
10.1 to 15 dB
-
-
35 dB
15 dB
0.1 dB
-
40 dB
-
-
25 dB
-5°C
5% RH
-40°C
5% RH
195.90 THz
50 GHz
96
24 dBm
13 dBm
-
6.6 dB
0.3 dB
0.5 dB
-
-
-
2 ps
-
0.5 dB
0.8 dB
0.5 ps
-
70°C
85% RH
70°C
95% RH
95% confidence, within ±11 GHz of ITU
0 to 10 dB attenuation
10.1 to 15 dB attenuation
Polarization mode dispersion (PMD) 95% confidence, within ±11 GHz of ITU
Return loss (at common)
Including connectors
Environmental and Operational
Operating case temperature
Operating humidity
Storage temperature
Storage humidity
Mechanical and Fiber Labeling
Module dimensions (W x D x H)
Entire module
Fiber type
All ports
Fiber length
Optical connector
All ports
Electrical interface
Connector labeling
Input ports
Output ports
Electrical
Supply voltage A
3.3 V ±5%
Supply voltage B
15 VA ±5%
230 x 150 x 50 mm
900 µm tight buffer SMF-28
1.0±0.2 m
LC
DPRAM & RS232
Port 1, port 2, port 3, port 4, port 5
Common
0.35 A
1
0.40 A
Note: Parameters are specified for start of life, over passband, over all channels, over operating temperature, attenuation range, and all polarization states unless stated
otherwise. Specifications are subject to change during the development cycle of the product.
1. Suggested minimal wattage of 3.3 V power supply is 2 W in order to deal with startup current transient.
WAVELENGTH SELECTIVE SWITCH (WSS) 5X1
4
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
Sample: MWSW5150C5041
Product Code
MWSW5150C5041
Description
Wavelength
Selective Switch
5x1
All statements, technical information and recommendations related to the products herein are based upon information believed to be
reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any
inaccuracies. The user assumes all risks and liability whatsoever in connection with the use of a product or its application. JDSU reserves
the right to change at any time without notice the design, specifications, function, fit or form of its products described herein, including
withdrawal at any time of a product offered for sale herein. JDSU makes no representations that the products
herein are free from any intellectual property claims of others. Please contact JDSU for more information. JDSU and the JDSU logo are
微控制器 MCU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
