SMT Power Inductors
High Current Molded Power Inductor - PA4344.XXXNLT Series
Height:
7.0mm Max
Footprint:
17.7mm x 17.2mm Max
Current Rating:
up to 52.0A
Inductance Range:
1.0uH to 100uH
Shielded construction and compact design
High current, low DCR, and high efficiency
Minimized acoustic noise and minimized leakage flux
200Vdc Isolation between terminal and core
Electrical Specifications @ 25°C - Operating Temperature -55°C to +125°C
Part
Number
PA4344.102NLT
PA4344.132NLT
PA4344.152NLT
PA4344.222NLT
PA4344.332NLT
PA4344.472NLT
PA4344.562NLT
PA4344.682NLT
PA4344.822NLT
PA4344.103NLT
PA4344.153NLT
PA4344.223NLT
PA4344.333NLT
PA4344.393NLT
PA4344.473NLT
PA4344.563NLT
PA4344.683NLT
PA4344.104NLT
Inductance
100KHz, 1V
uH±20%
1.0
1.3
1.5
2.2
3.3
4.7
5.6
6.8
8.2
10
15
22
33
39
47
56
68
100
Rated
Current
A
52
49
47
43.5
28
25
21
19
18
16.5
12.5
12
10.7
9.2
8.7
7.8
7
5.3
DC
Resistance
TYP.
mΩ
1.6
1.7
2
2.4
3.5
4.8
5.8
8.4
9.6
11.8
17.8
25.1
38
40
48
54
68
102
MAX.
mΩ
2
2.3
2.5
2.7
3.9
5.5
7.05
9.2
10.8
13
20.5
26.5
44
48
55
62
80
118
Saturation
Current 1
A
60
54
52
47
45
41
40
32
25
24
23
18
15
11
9.5
9
8
6.5
Saturation
Current 2
A
70
67
65
62
54
50
45
39
31
29
27
23
20
18
16
15
13
12
1
power.pulseelectronics.com
P771. J (07/18)
http://www.power.pulseelectronics.com/contact
SMT Power Inductors
High Current Molded Power Inductor - PA4344.XXXNLT Series
Notes:
1. Actual temperature of the component during system operation (ambient plus
temperature rise) must be within the standard operating range.
2. The saturation current 1 is the current at which the initial inductance drops ap-
proximately 30% at the stated ambient temperature. This current is determined by
placingthe component in the specified ambient environment and applying a short
duration pulse current (to eliminate self-heating effect) to the component.
3. The saturation current 2 is the current at which the initial inductance drops approxi-
mately 40% at the stated ambient temperature. This current is determined by placing
the component in the specified ambient environment and applying a short duration
pulse current (to eliminate self-heating effect) to the component.
4. The rated current is the DC current required to raise the component temperature by
approximately 40½C. Take note that the components’ performanc varies depending
5.
6.
on the system condition. It is suggested that the component be tested at the system
level, to verify the temperature rise of the component during system operation.
The part temperature (ambient+temp rise) should not exceed 125½C under worst
case operating conditions. Circuit design, PCB trace size and thickness, airflow and
other cooling provisions all affect the part temperature. Part temperature should be
verified in the end application.
Parts shown in bold are standard catalog parts and are available through sample
stock and distribution. Parts in lighter font are available but are not necessarily held
in sample stock or distribution
and lead times may be longer.
Please contact Pulse
for availablity.
Mechanical
PA4344.XXXNLT
Final Layout
Series
PA4344.XXXNLT
All Dimensions in mm.
A
17.7 Max
B
17.2 Max
C
7.0 Max
D
(11.9)
E
(13.1)
F
(12.5)
SUGGESTED PAD LAYOUT
G
(3.15)
H
(12.2)
TAPE & REEL INFO
Marking
Marking
W
A
K
0
P
1
G
Direction of tape
SURFACE MOUNTING TYPE, REEL/TAPE LIST
REEL SIZE (mm)
TAPE SIZE (mm)
A
G
P
1
W
K
0
PA4344.XXXNLT
2
power.pulseelectronics.com
QTY
PCS/REEL
200
Ø330
32
24
32
7.5
P771. J (07/18)
http://www.power.pulseelectronics.com/contact
SMT Power Inductors
High Current Molded Power Inductor - PA4344.XXXNLT Series
For More Information
Pulse Worldwide
Pulse Europe
Headquarters
Pulse Electronics GmbH
15255 Innovation Drive Ste 100
Am Rottland 12
San Diego, CA 92128
58540 Meinerzhagen
U.S.A.
Germany
Pulse China Headquarters
Pulse Electronics (ShenZhen) CO., LTD
D708, Shenzhen Academy of
Aerospace Technology,
The 10th Keji South Road,
Nanshan District, Shenzhen,
P.R. China 518057
Tel: 86 755 33966678
Fax: 86 755 33966700
Pulse North China
Room 2704/2705
Super Ocean Finance Ctr.
2067 Yan An Road West
Shanghai 200336
China
Tel: 86 21 62787060
Fax: 86 2162786973
Pulse South Asia
3 Fraser Street
0428 DUO Tower
Singapore 189352
Pulse North Asia
1F., No.111 Xiyuan Rd
Zhongli City
Taoyuan City 32057
Taiwan (R.O.C)
Tel: 858 674 8100
Fax: 858 674 8262
Tel: 49 2354 777 100
Fax: 49 2354 777 168
Tel: 65 6287 8998
Fax: 65 6280 0080
Tel: 886 3 4356768
Fax: 886 3 4356820
Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may
be trademarks or registered trademarks of their respective owners. © Copyright, 2018. Pulse Electronics, Inc. All rights reserved.
3
power.pulseelectronics.com
P771. J (07/18)
http://www.power.pulseelectronics.com/contact
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
