Model: 2511, 2512, 2515, 2516
2510 Series Handheld Digital
Storage Oscilloscopes
USER MANUAL
Safety Summary
The following safety precautions apply to both operating and maintenance
personnel and must be observed during all phases of operation, service,
and repair of this instrument. Before applying power, follow the
installation instructions and become familiar with the operating
instructions for this instrument.
If this device is damaged or something is missing, contact the place of
purchase immediately.
This manual contains information and warnings that must be followed to
ensure safe operation as well as maintain the meter in a safe condition.
DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE
Do not operate the instrument in the presence of flammable gases or
fumes. Operation of any electrical instrument in such an environment
constitutes a definite safety hazard.
KEEP AWAY FROM LIVE CIRCUITS
Instrument covers must not be removed by operating personnel.
Component replacement and internal adjustments must be made by
qualified maintenance personnel. Disconnect the power cord before
removing the instrument covers and replacing components. Under certain
conditions, even with the power cable removed, dangerous voltages may
exist. To avoid injuries, always disconnect power and discharge circuits
before touching them.
DO NOT SUBSTITUTE PARTS OR MODIFY THE INSTRUMENT
Do not install substitute parts or perform any unauthorized modifications
to this instrument. Return the instrument to B&K Precision for service and
repair to ensure that safety features are maintained.
WARNINGS AND CAUTIONS
WARNING
and
CAUTION
statements, such as the following examples,
denote a hazard and appear throughout this manual. Follow all
instructions contained in these statements.
A
WARNING
statement calls attention to an operating procedure, practice,
or condition, which, if not followed correctly, could result in injury or death
to personnel.
2
A
CAUTION
statement calls attention to an operating procedure, practice,
or condition, which, if not followed correctly, could result in damage to or
destruction of part or all of the product.
NOTE:
Voltage ratings are given as “working voltage”. They
should be read as Vac-rms (50 – 60 Hz) for AC sine
wave applications and as Vdc for DC applications.
WARNING
Do not connect the scope probes and DMM leads simultaneously.
Before using the DMM functions, disconnect all scope probes. Likewise,
disconnect all DMM test leads before using any scope functions.
When not in use, remove all scope probes, DMM test leads, and the USB
cable.
WARNING
To avoid potential fire or shock hazard:
Disconnect all probes, leads, power adapter, and USB cable before
opening the battery cover.
Do not turn on the instrument while the battery cover is removed.
Use only the included insulated probes, test leads, and power adapter
supplied with the instrument.
Use only the battery pack supplied with the instrument or approved by
us. Do not use other substitutes.
For AC power operation, always connect the adapter to the outlet first
before connecting to the instrument.
Observe all markings and ratings on the instrument before connecting
to the instrument.
While making measurements, verify that the performance ratings of
instruments and accessories that are used meet the correct safety levels
of the instrument.
3
Do not insert metal objects into any of the connectors.
WARNING
Do not use any exposed metal BNC or banana plug connectors with the
instrument. Use only the insulated accessories supplied with the
instrument.
Do not connect the USB cable while the instrument is not in use. Keep
the cable away from all probes and test leads.
Always connect the probes or test leads to the instrument first before
connecting to any other device under test (DUT). To remove,
disconnect them from the DUT first before disconnecting from the
instrument.
Do not operate the instrument in wet environments.
For high voltage testing, keep the BNC connectors and the entire
instrument dry.
Do not apply input voltages above the instrument and the probe’s
voltage rating.
CAUTION
Always cover the DC power input and USB ports on the side of the
instrument with the rubber lid when not in used.
Do not use any abrasive chemicals or volatile liquid when cleaning the
instrument. If using a cloth dampened with water, allow the instrument
to completely dry before reconnecting it.
4
Compliance Statements
Disposal of Old Electrical & Electronic Equipment (Applicable in the
European Union and other European countries with separate collection
systems)
This product is subject to Directive
2002/96/EC of the European Parliament and
the Council of the European Union on waste
electrical and electronic equipment (WEEE) ,
and in jurisdictions adopting that Directive,
is marked as being put on the market after
August 13, 2005, and should not be
disposed of as unsorted municipal waste.
Please utilize your local WEEE collection
facilities in the disposition of this product
and otherwise observe all applicable
requirements.
5
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
