Notice for TAIYO YUDEN Products
[ For General Electronic Equipment ]
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■
Product information in this catalog is as of October 2018. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully
before practical application or use of our products.
Please note that TAIYO YUDEN shall not be in any way responsible for any damages and defects in products or
equipment incorporating our products, which are caused under the conditions other than those specified in this
catalog or individual product specification sheets.
■
Please contact TAIYO YUDEN for further details of product specifications as the individual product specification
sheets are available.
■
Please conduct validation and verification of our products in actual condition of mounting and operating
environment before using our products.
■
The products listed in this catalog are intended for use in general electronic equipment (e.g., AV equipment, OA
equipment, home electric appliances, office equipment, information and communication equipment including,
without limitation, mobile phone, and PC) and medical equipment classified as Class I or II by IMDRF. Please be
sure to contact TAIYO YUDEN for further information before using the products for any equipment which may
directly cause loss of human life or bodily injury (e.g., transportation equipment including, without limitation,
automotive powertrain control system, train control system, and ship control system, traffic signal equipment,
disaster prevention equipment, medical equipment classified as Class III by IMDRF, highly public information
network equipment including, without limitation, telephone exchange, and base station).
Please do not incorporate our products into any equipment requiring high levels of safety and/or reliability (e.g.,
aerospace equipment, aviation equipment*, medical equipment classified as Class IV by IMDRF, nuclear control
equipment, undersea equipment, military equipment).
*Note: There is a possibility that our products can be used only for aviation equipment that does not directly affect the safe operation of aircraft (e.g.,
in-flight entertainment, cabin light, electric seat, cooking equipment) if such use meets requirements specified separately by TAIYO YUDEN.
Please be sure to contact TAIYO YUDEN for further information before using our products for such aviation equipment.
When our products are used even for high safety and/or reliability-required devices or circuits of general electronic
equipment, it is strongly recommended to perform a thorough safety evaluation prior to use of our products and to
install a protection circuit as necessary.
Please note that unless you obtain prior written consent of TAIYO YUDEN, TAIYO YUDEN shall not be in any way
responsible for any damages incurred by you or third parties arising from use of the products listed in this catalog
for any equipment requiring inquiry to TAIYO YUDEN or prohibited for use by TAIYO YUDEN as described above.
■
Information contained in this catalog is intended to convey examples of typical performances and/or applications
of our products and is not intended to make any warranty with respect to the intellectual property rights or any
other related rights of TAIYO YUDEN or any third parties nor grant any license under such rights.
■
Please note that the scope of warranty for our products is limited to the delivered our products themselves and
TAIYO YUDEN shall not be in any way responsible for any damages resulting from a fault or defect in our products.
Notwithstanding the foregoing, if there is a written agreement (e.g., supply and purchase agreement, quality
assurance agreement) signed by TAIYO YUDEN and your company, TAIYO YUDEN will warrant our products in
accordance with such agreement.
■
The contents of this catalog are applicable to our products which are purchased from our sales offices or
authorized distributors (hereinafter
“TAIYO
YUDEN’official sales channel” Please note that the contents of this
s
).
catalog are not applicable to our products purchased from any seller other than TAIYO YUDEN’official sales
s
channel.
■
Caution for Export
Some of our products listed in this catalog may require specific procedures for export according to
“U.S.
Export
Administration Regulations”
,
“Foreign
Exchange and Foreign Trade Control Law”of Japan, and other applicable
regulations. Should you have any questions on this matter, please contact our sales staff.
1
9
MULTILAYER CERAMIC CAPACITORS
MULTILAYER CERAMIC CAPACITORS
■PARTS
NUMBER
WAVE
REFLOW
WAVE
REFLOW
J M K
① ② ③
①Rated voltage
Code
P
A
J
L
E
T
G
U
H
Q
S
X
②Series name
Code
M
V
W
3
1 6
④
△
⑤
B
⑥
J
1
0 6
⑦
M L － T △
⑧ ⑨ ⑩ ⑪ ⑫
③End termination
Code
K
S
④Dimension（L×W）
△＝Blank space
Rated voltage［VDC½
2.5
4
6.3
10
16
25
35
50
100
250
630
2000
End termination
Plated
Cu Internal Electrodes (For High Frequency)
CERAMIC CAPACITORS
12
Series name
Multilayer ceramic capacitor
Multilayer ceramic capacitor for high frequency
LW reverse type multilayer capacitor
Dimensions
（L×W）［mm½
021
0.25× 0.125
042
0.4 × 0.2
063
0.6 × 0.3
1.0 × 0.5
105
0.52× 1.0 ※
1.6 × 0.8
107
0.8 × 1.6 ※
2.0 × 1.25
212
1.25× 2.0 ※
316
3.2 × 1.6
325
3.2 × 2.5
432
4.5 × 3.2
Note : ※LW reverse type（□WK） only
Type
W［mm½
Standard
0.3±0.05
0.5±0.10
0.8＋0.15/－0.05
1.25＋0.15/－0.05
1.6±0.20
2.5±0.30
0.3±0.09
0.5＋0.15/－0.05
0.8＋0.20/－0
1.25＋0.20/－0
EIA（inch）
008004
01005
0201
0402
0204
0603
0306
0805
0508
1206
1210
1812
⑤Dimension tolerance
Code
Type
△
ALL
063
105
107
A
212
316
325
063
105
107
B
212
316
105
105
L［mm½
Standard
0.6±0.05
1.0±0.10
1.6＋0.15/－0.05
2.0＋0.15/－0.05
3.2±0.20
3.2±0.30
0.6±0.09
1.0＋0.15/－0.05
1.6＋0.20/－0
2.0＋0.20/－0
T［mm½
Standard
0.3±0.05
0.5±0.10
0.8＋0.15/－0.05
0.45±0.05
0.85±0.10
1.25＋0.15/－0.05
0.85±0.10
1.6±0.20
2.5±0.30
0.3±0.09
0.5＋0.15/－0.05
0.45±0.05
0.8＋0.20/－0
0.45±0.05
0.85±0.10
1.25＋0.20/－0
1.6±0.30
0.5＋0.20/－0
0.5＋0.30/－0
△= Blank space
C
E
3.2±0.30
1.6±0.30
1.0＋0.20/－0
0.5＋0.20/－0
1.0＋0.30/－0
0.5＋0.30/－0
Note: cf. STANDARD EXTERNAL DIMENSIONS
⑥Temperature characteristics code
■High dielectric type（Excluding Super low distortion multilayer ceramic capacitor）
Applicable
Temperature
Code
Ref. Temp.［℃½
Capacitance change
standard
range［℃½
JIS
BJ
EIA
B7
C6
C7
LD(※)
EIA
EIA
EIA
EIA
X5R
X7R
X6S
X7S
X5R
－55½＋ 85
－55½＋125
－55½＋105
－55½＋125
－55½＋ 85
25
25
25
25
25
±15％
±15％
±22％
±22％
±15％
B
－25½＋ 85
20
±10％
Capacitance
tolerance
±10％
±20％
±10％
±20％
±10％
±20％
±10％
±20％
±10％
±20％
±10％
±20％
Tolerance
code
K
M
K
M
K
M
K
M
K
M
K
M
△= Blank space
Note : ※.LD Low distortion high value multilayer ceramic capacitor
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
c_mlcc_e-E07R01
1
9
■PARTS
NUMBER
LW Reversal Decoupling Capacitors（LWDC
TM
）
●105TYPE
【Temperature Characteristic BJ : X5R（－55½＋85℃）】 0.3mm thickness（P）
Part number 1
TWK105 BJ104MP-F
EWK105 BJ224MP-F
LWK105 BJ474MP-F
JWK105 BJ104MP-F
JWK105 BJ474MP-F
JWK105 BJ105MP-F
JWK105 BJ225MP-F
Part number 2
Rated voltage
[V]
25
16
10
6.3
Temperature
characteristics
X5R
X5R
X5R
X5R
*1
X5R
*1
X5R
X5R
Capacitance
[F]
0.1
0.22
0.47
0.1
0.47
1
2.2
μ
μ
μ
μ
μ
μ
μ
Capacitance tolerance
[％]
±20
±20
±20
±20
±20
±20
±20
tanδ
[％]
5
10
10
5
10
10
10
HTLT
Rated voltage x ％
150
150
150
150
150
150
150
Thickness
*3
[mm]
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
【Temperature Characteristic C6 : X6S（－55½＋105℃）, C7 : X7S（－55½＋125℃）】 0.3mm thickness（P）
Part number 1
EWK105 C6104MP-F
LWK105 C7104MP-F
LWK105 C6224MP-F
JWK105 C7104MP-F
JWK105 C7224MP-F
JWK105 C6474MP-F
AWK105 C6224MP-F
AWK105 C6474MP-F
AWK105 C6105MP-F
AWK105 C6225MP-F
Part number 2
Rated voltage
[V]
16
10
6.3
Temperature
characteristics
X6S
X7S
X6S
X7S
X7S
X6S
X6S
X6S
X6S
X6S
Capacitance
[F]
0.1
0.1
0.22
0.1
0.22
0.47
0.22
0.47
1
2.2
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
Capacitance tolerance
[％]
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
tanδ
[％]
5
5
10
5
10
10
10
10
10
10
HTLT
Rated voltage x ％
150
150
150
150
150
150
150
150
150
150
Thickness
*3
[mm]
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
CERAMIC CAPACITORS
4
●107TYPE
【Temperature Characteristic BJ : X5R（－55½＋85℃）】 0.5mm thickness（V）
Part number 1
TWK107 BJ104MV-T
EWK107 BJ224MV-T
EWK107 BJ474MV-T
LWK107 BJ105MV-T
LWK107 BJ225MV-T
JWK107 BJ105MV-T
JWK107 BJ225MV-T
JWK107 BJ475MV-T
AWK107 BJ106MV-T
Part number 2
Rated voltage
[V]
25
16
10
6.3
4
Temperature
characteristics
X5R
X5R
*1
X5R
*1
X5R
X5R
X5R
*1
X5R
X5R
X5R
*1
Capacitance
[F]
0.1
0.22
0.47
1
2.2
1
2.2
4.7
10
μ
μ
μ
μ
μ
μ
μ
μ
μ
Capacitance tolerance
[％]
±20
±20
±20
±20
±20
±20
±20
±20
±20
tanδ
[％]
5
5
5
10
10
10
10
10
10
HTLT
Rated voltage x ％
150
150
150
150
150
150
150
150
150
Thickness
*3
[mm]
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
【Temperature Characteristic B7 : X7R（－55½＋125℃）, C6 : X6S（－55½＋105℃）, C7 : X7S（－55½＋125℃）】 0.5mm thickness（V）
Part number 1
TWK107 B7104MV-T
EWK107 B7224MV-T
EWK107 B7474MV-T
JWK107 C7105MV-T
AWK107 C7225MV-T
AWK107 C6475MV-T
PWK107 C6106MV-T
Part number 2
Rated voltage
[V]
25
16
6.3
4
2.5
Temperature
characteristics
X7R
X7R
X7R
X7S
X7S
X6S
X6S
Capacitance
[F]
0.1
0.22
0.47
1
2.2
4.7
10
μ
μ
μ
μ
μ
μ
μ
Capacitance tolerance
[％]
±20
±20
±20
±20
±20
±20
±20
tanδ
[％]
5
5
5
10
10
10
10
HTLT
Rated voltage x ％
150
150
150
150
150
150
150
Thickness
*3
[mm]
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
●212TYPE
【Temperature Characteristic BJ : X5R（－55½＋85℃）】 0.85mm thickness（D）
Part number 1
TWK212 BJ475[]D-T
EWK212 BJ106MD-T
LWK212 BJ475[]D-T
LWK212 BJ106MD-T
JWK212 BJ226MD-T
Part number 2
Rated voltage
[V]
25
16
10
6.3
Temperature
characteristics
X5R
X5R
X5R
X5R
X5R
Capacitance
[F]
4.7
10
4.7
10
22
μ
μ
μ
μ
μ
Capacitance tolerance
[％]
±10, ±20
±20
±10, ±20
±20
±20
tanδ
[％]
10
10
10
10
10
HTLT
Rated voltage x ％
150
150
150
150
150
Thickness
*3
[mm]
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
【Temperature Characteristic B7 : X7R（－55½＋125℃）, C6 : X6S（－55½＋105℃）】 0.85mm thickness（D）
Part number 1
TWK212 B7225[]D-T
EWK212 C6475[]D-T
LWK212 C6106MD-T
AWK212 C6226MD-T
Part number 2
Rated voltage
[V]
25
16
10
4
Temperature
characteristics
X7R
X6S
X6S
X6S
Capacitance
[F]
2.2
4.7
10
22
μ
μ
μ
μ
Capacitance tolerance
[％]
±10, ±20
±10, ±20
±20
±20
tanδ
[％]
5
10
10
10
HTLT
Rated voltage x ％
150
150
150
150
Thickness
*3
[mm]
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
c_mlcc_e-E07R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our product specification sheets.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our website (http://www.ty-top.com/) .
1
9
43
淘e淘
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
