Application Specification
YEU-CN0300April.29th
2014 Rev.C
CFP2(CN121 series) Application Specification
Note
All numerical values are in metric units. Dimensions are in millimeters.
Unless otherwise specified, dimensions have a tolerance of ±0.30 mm and
angles have a tolerance of ±2 °.Figures and illustrations are for identification
only and are not drawn to scale.
1. INTRODUCTION
This specification covers the requirement for application of CFP MSA
requirement (The home of the CFP Multi Source Agreement). CFP2
connector assembly is 0.60mm pitch, right angle surface mount connector. A
Cage that provides a positive stop for the CFP2 transceiver and EMI
isolation for the connector assembly. Threaded holes in the connector cover
hold the CFP2 transceiver in place once installed. The optional heat sink will
help dissipate heat in high performance application.
- Page 1 -
Application Specification
YEU-CN0300April.29th
2014 Rev.C
OPTICAL MODULE & CONNECTOR ASSEMBLY EXPLOITED VIEW
⑥
⑤
④
③
②
①
⑦
- Page 2 -
Application Specification
YEU-CN0300April.29th
2014 Rev.C
Standard components
OPTICAL MODULE & KEY COMPONENTS
①
MODULE CONNECTOR ASSEMBLY
Yamaichi P/N: CN121P-104-0001
CN121P-104-0002
CN121P-104-0003
Contacts
PCB 1.0mm(without crash rib)
PCB 1.60mm
PCB 1.0mm(with crash rib)
Guide Pins
OPTICAL MODULE & KEY COMPONENTS
②
Host connector
Yamaichi P/N: CN121S-104-0001
Connector Slot
Contacts
Guide Pins
×2
Guide Pins
③
Dual port Connector cover
Yamaichi P/N: CN121G-104-0001
Connector cover slot
EMI Gasket
- Page 3 -
Application Specification
YEU-CN0300April.29th
2014 Rev.C
④
Dial port Cage
Yamaichi P/N: CN121C-104-0001
EMI finger
Module slot
⑤
Aluminum Heat sink (Side to Side)
Yamaichi P/N: CN121F-104-0001
Press-fit terminal
⑤
Aluminum Heat sink (Front to back)
Yamaichi P/N: CN121F-104-0003
⑤
Low profile Heat sink (Side to Side)
Yamaichi P/N: CN121F104-YEU01
⑤
Copper Heat sink (Side to Side)
Yamaichi P/N: CN121F-104-0004-YEU
- Page 4 -
Application Specification
YEU-CN0300April.29th
2014 Rev.C
⑥
Heat sink clip
Yamaichi P/N: CN121M104-0001
⑦Standard
screw
Yamaichi P/N: CN121-03#SC
⑦Long
screw (for Belly to Belly configuration)
Yamaichi P/N: CN121-01#SC
- Page 5 -