STEVAL-PCC002V1
Low speed USB to serial bridge based on ST7263B
Data Brief
Features
■
■
■
■
■
PC executable software for HID
communication
CTS/RTS flow control
Two LEDs to indicate traffic direction
In-circuit programming capability through ICC
connector
Wrapping area capability with access to
MCU I/Os
Description
The board is a complete evaluation board for a
serial port bridge as well as an evaluation board
for ST72F63B/60 devices. This application is used
to interface devices with a serial port (RS232
type) and a host-computer USB port. USB data
transfers comply with HID-class protocols. The
bridge is based on a USB low-speed
microcontroller which provides a maximum
guaranteed USB transfer rate of 800 bytes per
second. The bridge application is evaluated on a
PC by running a dedicated applet that controls
and monitors data transfers on both the USB and
serial COM ports. The included hardware
provides in-circuit crogramming (ICP) capabilities
for the microcontroller and almost all the MCU I/
Os are available on expansion connectors to
evaluate different applications. The RS232 part
can be separated by removing the appropriate
soldering joints (shunts). This can be used to
modify certain firmware or hardware parameters
for evaluation or customization purposes.
bs
O
et
l
o
ro
P
e
uc
d
s)
t(
O
-
so
b
te
le
ro
P
uc
d
s)
t(
STEVAL-PCC002V1
October 2007
Rev 1
1/4
www.st.com
4
For further information contact your local STMicroelectronics sales office.
STEVAL-PCC002V1
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
bs
O
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
et
l
o
ro
P
e
uc
d
s)
t(
O
-
so
b
te
le
ro
P
uc
d
s)
t(
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
4/4