STM3210G-SK/KEI
Keil™ starter kit for STM32F100/101/102/103 lines
(with STM32F103ZG MCU)
Data brief
Features
•
The Keil MDK-Lite development tools:
– µVision
®
4 IDE/Debugger for application
programming and debugging
– ARM C/C++ compiler
– RTX real-time kernel, a multi-tasking
operating system for embedded
applications
– MDK-Lite supports applications with up to
32 KB code-size
•
ULINK-ME in-circuit debugger/programmer
with USB interface to host PC and 20-pin JTAG
or 10-pin CoreSight debug interface
•
Full-featured Keil evaluation board with a
72 MHz STM32F103ZG MCU
Description
The Keil starter kit is a complete, cost-effective
solution for starting application development and
evaluating the STMicroelectronics
STM32F100/101/102/103 ARM Cortex™-M3
processor-based microcontrollers.
The STM3210G-SK/KEI starter kit provides all the
hardware and software you need to start
developing applications for the STM32 ARM core-
based families of microcontrollers. It comes
complete with a full-featured evaluation board
(including USB device, CAN, USARTs, Audio,
MicroSD Card interface and QVGA LCD), Keil's
MDK-ARM Lite Edition (32 KB) development
tools, and the ULINK-ME™ (USB/JTAG) adapter.
Keil starter kits are available for a full range of ST
ARM core-based microcontrollers.
September 2013
DocID025267 Rev 1
1/4
www.st.com
For further information contact your local STMicroelectronics sales office.
Starter kit architecture
STM3210G-SK/KEI
Starter kit architecture
Keil development software
is a suite of software development tools for creating and
debugging microcontroller applications that includes:
•
µVision
®
4
integrated development environment, which integrates the ARM RealView
Compilation Tools and Keil’s debugging software so that users can quickly and easily
develop and debug their applications while they run on a target microcontroller.
ARM RealView Compilation Tools (RVCT)
32 KB code-size limited version of the
optimizing C/C++ compiler for ARM™ core-based microcontrollers.
ULINK-ME™
USB/JTAG in-circuit debugger / programmer, which integrates fully with
µVision4, allowing users to download the application to the target and debug it while it
runs on the ST ARM core-based microcontroller on the evaluation board.
Keil™ evaluation board,
an application board that provides a full range of features to
help users evaluate and start developing applications for the included
STM32F103ZGTx microcontroller. The Keil MCBSTM32EXL evaluation board includes
the following key features:
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
1-Mbyte external RAM, FSMC
8-Mbyte external Flash, SPI
Micro SD/MMC card connector
20-pin JTAG connector
20-pin trace tool connector
Power supply from USB
USART connector
SPI
I
2
C
CAN connector
USB connector
8 user LEDs
QVGA LCD display
Potentiometer connected to ADC
4 user and wake-up push buttons
Reset button
Wrap area
Joystick
•
•
•
Ordering information
Keil starter kits can be ordered from Keil or from your nearest ST distributor or sales office
for STM32F100/101/102/103 lines (ST order code: STM3210G-SK/KEI).
For more information and complete documentation, please refer to the Keil web site or the
STMicroelectronics microcontroller support site on www.st.com.
2/4
DocID025267 Rev 1
STM3210G-SK/KEI
Revision history
Revision history
Table 1. Document revision history
Date
27-Sep-2013
Revision
1
Initial release.
Changes
DocID025267 Rev 1
3/4
4
STM3210G-SK/KEI
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE
SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B)
AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS
OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT
PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS
EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY
DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE
DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2013 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
4/4
DocID025267 Rev 1
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
