FMS6145 Low-Cost Five-Channel 4th-Order Standard Definition Video Filter Driver
December 2006
FMS6145
Low-Cost Five-Channel 4th-Order
Standard Definition Video Filter Driver
Features
■
Five 4th-order 8MHz (SD)
fi
lters
■
Drives single, AC- or DC-coupled, video loads (2V
pp
, 150Ω)
■
Drives dual, AC- or DC-coupled, video loads (2V
pp
, 75Ω)
■
Transparent input clamping
■
AC- or DC-coupled inputs
■
AC- or DC-coupled outputs
■
DC-coupled outputs eliminate AC-coupling capacitors
■
5V only
■
Robust 8kV ESD protection
■
Lead-free TSSOP-14 package
Description
The FMS6145 Low-Cost Video Filter (LCVF) is intended
to replace passive LC
fi
lters and drivers with a low-cost
integrated device. Five 4th-order
fi
lters provide improved
image quality compared to typical 2nd or 3rd-order
passive solutions.
The FMS6145 may be directly driven by a DC-coupled
DAC output or an AC-coupled signal. Internal diode
clamps and bias circuitry may be used if AC-coupled
inputs are required (see
Applications
section for details).
The outputs can drive AC- or DC-coupled single (150Ω) or
dual (75Ω) loads. DC coupling the outputs removes the
need for output coupling capacitors. The input DC levels
are offset approximately +280mV at the output (see
Applications
section for details).
Applications
■
Cable set-top boxes
■
Satellite set-top boxes
■
DVD players
■
HDTV
■
Personal Video Recorders (PVR)
■
Video On Demand (VOD)
Functional Block Diagram
IN1
Transparent Clamp
6d
B
OUT1
IN2
Transparent Clamp
6d
B
OUT2
IN3
Transparent Clamp
6d
B
OUT3
IN4
Transparent Clamp
6d
B
OUT4
IN5
Transparent Clamp
6d
B
OUT5
8MHz, 4th order
Ordering Information
Part Number
FMS6145MTC14
FMS6145MTC14X
Package
TSSOP-14
TSSOP-14
Pb-Free
Yes
Yes
Operating
Temperture Range
-40°C to +85°C
-40°C to +85°C
Packaging
Method
Tube
Tape and Reel
© 2006 Fairchild Semiconductor Corporation
FMS6145 Rev. 2.0.4
www.fairchildsemi.com
FMS6145 Low-Cost Five-Channel 4th-Order Standard Definition Video Filter Driver
Pin Configuration
IN1
IN2
IN3
1
2
3
4
5
6
7
14
OUT1
OUT2
FMS6145
14-pin
TSSOP
13
12
11
10
9
8
OUT3
GND
V
CC
IN4
IN5
NC
OUT4
OUT5
NC
Pin Assignments
Pin #
1
2
3
4
5
6
7, 8
9
10
11
12
13
14
Name
IN1
IN2
IN3
V
CC
IN4
IN5
NC
OUT5
OUT4
GND
OUT3
OUT2
OUT1
Type
Input
Input
Input
Input
Input
Input
Video input, channel 1
Video input, channel 2
Video input, channel 3
+5V supply, do not
fl
oat
Video input, channel 4
Video input, channel 5
No Connect
Output
Output
Output
Output
Output
Output
Filtered video output, channel 5
Filtered video output, channel 4
Description
Must be tied to ground, do not
fl
oat
Filtered video output, channel 3
Filtered video output, channel 2
Filtered video output, channel 1
© 2006 Fairchild Semiconductor Corporation
FMS6145 Rev. 2.0.4
www.fairchildsemi.com
2
FMS6145 Low-Cost Five-Channel 4th-Order Standard Definition Video Filter Driver
Absolute Maximum Ratings
The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The
device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are
not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table defines the conditions
for actual device operation. Functional operation under any of these conditions is NOT implied. Performance and reliabi-
lity are guaranteed only if recommended operating conditions are not exceeded.
Parameter
DC Supply Voltage
Analog and Digital I/O
Output Channel - Any One Channel (Do Not Exceed)
Min.
-0.3
-0.3
Max.
6
V
CC
+ 0.3
50
Unit
V
V
mA
Reliability Information
Symbol
T
J
T
STSG
T
L
θ
JA
Parameter
Junction Temperature
Storage Temperature Range
Lead Temperature (Soldering, 10s)
Thermal Resistance, JEDEC Standard Multi-layer
Test Boards, Still Air
Min.
-65
Typ.
Max.
150
+150
300
Unit
°C
°C
°C
°C/W
90
Recommended Operating Conditions
Symbol
T
A
V
CC
V
CC
Range
Parameter
Operating Temperature Range
Min.
-40
+4.75
Typ.
+5.0
Max.
+85
+5.25
Unit
°C
V
© 2006 Fairchild Semiconductor Corporation
FMS6145 Rev. 2.0.4
www.fairchildsemi.com
3
FMS6145 Low-Cost Five-Channel 4th-Order Standard Definition Video Filter Driver
DC Electrical Characteristics
T
A
= 25°C, V
CC
= 5V, R
SOURCE
= 37.5Ω; all inputs are AC-coupled with 0.1μF; all outputs are AC coupled with 220μF into
150Ω loads; unless otherwise noted.
Symbol
I
CC
V
IN
PSRR
Parameter
Supply Current
(1)
Video Input Voltage Range
Power Supply Rejection
Conditions
FMS6145 (No Load)
Referenced to GND if DC-coupled
DC (All Channels)
Min. Typ. Max. Units
30
1.4
-50
46
mA
Vpp
dB
Notes:
1.100% tested at 25°C.
AC Electrical Characteristics
T
A
= 25°C, V
IN
= 1V
pp
, V
CC
= 5V, RSOURCE = 37.5Ω; all inputs are AC coupled with 0.1μF; all outputs are
AC-coupled with 220μF into 150Ω loads; unless otherwise noted.
Symbol
AV
f
1dB
f
c
f
SB
dG
dφ
THD
X
TALK
SNR
t
pd
Parameter
Channel Gain
(1)
-1dB Bandwidth
(1)
-3dB Bandwidth
Attenuation (Stopband Reject)
Differential Gain
Differential Phase
Output Distortion (All Channels)
Crosstalk (Channel-to-Channel)
Signal-to-Noise Ratio
Propagation Delay
Conditions
All Channels
All Channels
All Channels
All Channels at f = 27MHz
All Channels
All Channels
V
OUT
= 1.8Vpp, 1MHz
at 1MHz
All Channels, NTC-7 Weighting:
100kHz to 4.2MHz
Delay from Input-to-Output, 4.5MHz
Min. Typ. Max. Units
5.6
4.5
6.0
6.7
7.9
48
0.3
0.6
0.4
-60
75
59
6.6
dB
MHz
MHz
dB
%
°
%
dB
dB
ns
Notes:
1.100% tested at 25°C.
© 2006 Fairchild Semiconductor Corporation
FMS6145 Rev. 2.0.4
www.fairchildsemi.com
4
FMS6145 Low-Cost Five-Channel 4th-Order Standard Definition Video Filter Driver
Typical Performance Characteristics
T
A
= 25°C, V
CC
= 5V, R
SOURCE
= 37.5Ω; all inputs AC coupled with 0.1μF; all outputs are AC coupled with 220μF into 150Ω
loads; unless otherwise noted.
5
0
-5
-10
-15
-20
-25
-30
-35
-40
-45
-50
-55
2
1
50
40
30
20
Normalized Gain (dB)
Delay (ns)
10
0
-10
-20
-30
-40
1
Mkr Frequency
Ref
400kHz
1
2
3
6.68MHz
7.87MHz
27MHz
Gain
6dB
-1dB BW
-3dB BW
-48.66dB
3
1 = 8.2MHz (14.78ns)
-50
30
400kHz
5
10
15
20
25
30
400kHz
5
10
15
20
25
Frequency (MHz)
Frequency (MHz)
Figure 1. Frequency Response
-60
-70
Figure 2. Group Delay vs. Frequency
0.2
0.1
NTSC
Differential Gain (%)
-80
0
-0.1
-0.2
-0.3
-0.4
-0.5
Min = -0.31
Max = 0.03
ppMax = 0.34
Noise (dB)
-90
-100
-110
-120
-130
400kHz
1
2
3
4
5
6
1st
2nd
3rd
4th
5th
6th
Frequency (MHz)
Figure 3. Noise vs. Frequency
1.0
Figure 4. Differential Gain
Differential Phase (deg)
0.8
0.6
0.4
0.2
0
-0.2
-0.4
NTSC
Min = 0.00
Max = 0.63
ppMax = 0.63
1st
2nd
3rd
4th
5th
6th
Figure 5. Differential Phase
© 2006 Fairchild Semiconductor Corporation
FMS6145 Rev. 2.0.4
www.fairchildsemi.com
5
stm32/stm8
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
