TITLE
SPECIFICATION CONTROL DRAWING
WIRE, RADIATION-CROSSLINKED, MODIFIED ETFE-INSULATED,
LIGHTWEIGHT, GENERAL PURPOSE, OUTER SPACE, 600 VOLT
CONDUCTOR - SILVER-COATED COPPER
55/0112
Date
4-30-13
Revision
H
This specification sheet forms a part of the latest issue of Raychem Specification 55/.
INSULATION - LOW OUTGASSING,
RADIATION-CROSSLINKED,
MODIFIED ETFE
TABLE I. CONSTRUCTION DETAILS
PART NUMBER
1/
55/0112-30-*
55/0112-28-*
55/0112-26-*
55/0112-24-*
55/0112-22-*
55/0112-20-*
55/0112-18-*
55/0112-16-*
55/0112-14-*
55/0112-12-*
55/0112-10-*
55/0112-8-*
WIRE
SIZE
(AWG)
30
28
26
24
22
20
18
16
14
12
10
8
CONDUCTOR
STRANDING
(number x AWG)
7 x 38
7 x 36
19 x 38
19 x 36
19 x 34
19 x 32
19 x 30
19 x 29
19 x 27
37 x 28
37 x 26
133 x 29
DIAMETER OF
STRANDED
CONDUCTOR
(in.)
MINIMUM
.011
.014
.018
.023
.029
.037
.046
.052
.065
.084
.106
.158
MAXIMUM
.012
.015
.019
.025
.030
.039
.048
.054
.068
.087
.112
.169
FINISHED WIRE
MAXIMUM
RESISTANCE
AT 20°C
(ohms/1000 ft)
100.7
63.8
38.4
24.3
15.1
9.19
5.79
4.52
2.88
1.90
1.19
.658
DIAMETER
(in.)
.024 ± .002
.027 ± .002
.032 ± .002
.037 ± .002
.043 ± .002
.050 ± .002
.060 ± .002
.068 ± .002
.085 ± .003
.103 ± .003
.128 ± .006
.188 ± .008
MAXIMUM
WEIGHT
(lbs/1000 ft.)
.66
.91
1.4
2.0
2.8
4.3
6.5
8.3
13.0
19.7
32.3
60.5
TABLE II. PERFORMANCE DETAILS
BEND TESTING
PART NUMBER
1/
55/0112-30-*
55/0112-28-*
55/0112-26-*
55/0112-24-*
55/0112-22-*
55/0112-20-*
55/0112-18-*
55/0112-16-*
55/0112-14-*
55/0112-12-*
55/0112-10-*
55/0112-8-*
MANDREL DIAMETER
(inch) (± 3%)
CROSSLINKED VERIFICATION
.250
.250
.375
.375
.500
.500
.500
.750
1.00
1.50
2.00
3.00
WEIGHT
(lb) (± 3%)
CROSSLINKED VERIFICATION
.125
.125
.125
.250
.375
.500
.500
.750
1.00
1.50
1.50
4.00
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
1/
COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE
ADDED TO THE PART NUMBER. AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
Raychem, TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks.
Raychem Wire & Cable
501 Oakside Avenue
Redwood City, CA 94063-3800
Phone: 1-800-227-8816
Fax: 1-650-361-6297
© 2010-2013 Tyco Electronics Corporation,. All rights reserved.
Page 1 of 2
DIMENSIONS ARE IN INCHES, AND UNLESS OTHERWISE DESIGNATED ARE NOMINAL.
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
SPECIFICATION CONTROL DRAWING
Revision
SCD Number
Page 2 of 2
H
55/0112
WIRE RATINGS AND ADDITIONAL REQUIREMENTS
TEMPERATURE RATING: 200°C
Maximum continuous conductor temperature
VOLTAGE RATING: 600 volts (rms) at sea level
COLOR: White preferred
CROSSLINKED VERIFICATION: 300 ± 3°C for 1 hour
IDENTIFICATION AND COLOR STRIPING DURABILITY:
125 cycles (250 strokes) (minimum), 500 g weight
INSULATION ELONGATION; 50% (minimum)
INSULATION FLAWS:
Spark Test, 3.0 kV (rms)
Impulse Dielectric Test, 8.0 kV (peak)
INSULATION THICKNESS: 0.005 in. (minimum)
RADIATION RESISTANCE: 500 megarads
SHRINKAGE: 230 ± 3°C for 1 hour, 0.125 in. (maximum) in 12 inches
VACUUM STABILITY:
Total Mass Loss (TML), 1.00% (maximum)
Volatile Condensable Material, 0.10% (maximum)
VOLTAGE WITHSTAND (Post Environmental): 2500 volts (rms), 60 Hz, 5 minutes
PART NUMBER:
The "*" in the part numbers on page 1 shall be replaced by a color code designator.
1/
Example: AWG 22, White: 55/0112-22-9
AWG 22, White with black stripe: 55/0112-22-90
1/
See footer section on page 1
电子竞赛
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
