HLMP-3351, HLMP-3366, HLMP-3451,
HLMP-3466, HLMP-3554, HLMP-3568
T-1
3
/
4
(5 mm) Low Profile LED Lamps
Data Sheet
Description
The HLMP-335x/-336x Series are Gallium Arsenide
Phosphide on Gallium Phosphide High Efficiency Red
Light Emitting Diodes.
The HLMP-345x/-346x Series are Gallium Arsenide
Phosphide on Gallium Phosphide Yellow Light Emitting
Diodes.
The HLMP-355x/-356x Series are Gallium Phosphide Green
Light Emitting Diodes.
The Low Profile T-1
3
/
4
package provides space savings
and is excellent for backlighting applications.
Features
•
High intensity
•
Low profile: 5.8 mm (0.23 in.) nominal
•
T-1
3
/
4
diameter package
•
Diffused and non-diffused types
•
General purpose leads
•
IC compatible/low current requirements
•
Reliable and rugged
Package Dimensions
Selection Guide
Color
Red
Package Description
T-1
3
/
4
Tinted, diffused
2q
1/2[1]
50
Part Number
HLMP-
3351
3351-D00xx
3351-F00xx
Luminous Intensity Iv (mcd)
Min.
5.4
2.1
5.4
13.8
13.8
3.6
3.6
5.7
9.2
9.2
9.2
6.7
6.7
10.6
10.6
Max.
-
-
-
-
-
-
-
18.4
-
-
-
-
-
-
-
T-1
3
/
4
Tinted, non-diffused
Yellow
T-1
3
/
4
Tinted, diffused
45
50
3366
3366-H00xx
3451
3451-D00xx
3451-EFBxx
3451-F00xx
T-1
3
/
4
Tinted, non-diffused
Green
T-1
3
/
4
Tinted, diffused
T-1
3
/
4
Tinted, non-diffused
45
50
40
3466
3466-F00xx
3554
3554-E00xx
3568
3568-F00xx
Part Numbering System
HLMP - 3 x xx - x x x xx
Mechanical Option
00: Bulk
01: Tape & Reel, Crimped Leads
02: Tape & Reel, Straight Leads
R1: Tape & Reel, Counterclockwise
Color Bin Options
0: Full Color Bin Distribution
B: Color Bin 2 & 3 only
Maximum Iv Bin Options
Minimum Iv Bin Options
Lens Options
0: Open (No. max. limit)
Others: Please Refer to the Iv Bin Table
Please Refer to the Iv Bin Table
5x: Tinted, Diffused
6x: Tinted, Nondiffused
Color Options
3: GaP HER
4: GaP Yellow
5: GaP Green
Package Options
2
3: T-1 3/4 (5 mm)
Absolute Maximum Ratings at T
A
= 25°C
Parameter
Peak Forward Current
Average Forward Current
[1]
DC Current
[2]
Power Dissipation
[3]
Reverse Voltage (I
R
= 100
μA)
Transient Forward Current
[4]
(10
μs
Pulse)
Operating Temperature Range
Storage Temperature Range
Wave Soldering Temperature
[1.59 mm (0.063 in.) from Body]
Solder Dipping Temperature
[1.59 mm (0.063 in.) from Body]
3350 Series
90
25
30
135
5
500
-40 to +100
-40 to +100
3450 Series
60
20
20
85
5
500
-40 to +100
-40 to +100
250°C for 3 seconds
260°C for 5 seconds
3550 Series
90
25
30
135
5
500
-20 to +100
-40 to +100
Units
mA
mA
mA
mW
V
mA
°C
Notes:
1. See Figure 10 (High Efficiency Red), 15 (Yellow), or 20 (Green) to establish pulsed operating conditions.
2. For High Efficiency Red and Green Series, derate linearly from 50°C at 0.5 mA/°C. For Red and Yellow Series, derate linearly from 50°C at
0.2 mA/°C.
3. For High Efficiency Red and Green Series, derate power linearly from 25°C at 1.8 mW/°C. For Red and Yellow Series, derate power linearly from 50°C
at 1.6 mW/°C.
4. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED die and
wirebond. It is not recommended that the device be operated at peak current beyond the peak forward current listed in the Absolute Maximum
Ratings.
1.0
HIGH
EFFICIENCY
RED
T
A
= 25°C
RED
RELATIVE INTENSITY
0.5
GREEN
YELLOW
500
550
600
650
700
750
WAVELENGTH – nm
Figure 1. Relative intensity vs. wavelength.
3
High Efficiency Red HLMP-335x/-336x Series
Electrical Specifications at T
A
= 25°C
Symbol
2q
1/2
Description
Including Angle Between
Half Luminous Intensity
Points
Peak Wavelength
Dominant Wavelength
Spectral Line Halfwidth
Speed of Response
Capacitance
Thermal Resistance
Forward Voltage
Reverse Breakdown Voltage
Luminous Efficacy
Device
HLMP-
3366
Min.
Typ.
50
50
45
45
635
626
40
90
11
260
1.9
Max.
Units
Deg.
Test Conditions
Note 1
(Figure 11)
λ
PEAK
λ
d
Δλ
1/2
τ
s
C
Rq
J-PIN
V
F
V
R
η
V
nm
nm
nm
ns
pF
°C/W
2.4
V
V
Measurement at
Peak (Figure 1)
Note 2
V
F
= 0; f = 1 MHz
Junction to
Cathode Lead
I
F
= 10 mA
(Figure 7)
I
R
= 100
μA
Note 3
5.0
145
lm/W
Notes:
1.
q
1
/
2
is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
2. Dominant wavelength,
λ
d
, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the
device.
3. Radiant Intensity, I
e
, in watts/steradian may be found from the equation I
e
= I
v
/η
v
, where I
v
is the luminous intensity in candelas and
η
v
is the
luminous efficacy in lumens/watt.
60
50
I
F
– FORWARD CURRENT – mA
40
30
20
10
0
1.0
1.5
2.0
2.5
3.0
3.5
4.0
V
F
– FORWARD VOLTAGE – V
Figure 7. Forward current vs. forward voltage.
Figure 8. Relative luminous intensity vs. forward
current.
Figure 9. Relative efficiency (luminous intensity
per unit current) vs. peak current.
4
Figure 10. Maximum tolerable peak current vs. pulse duration.
(I
DC
MAX as per MAX ratings).
Figure 11. Relative luminous intensity vs. angular displacement.
Yellow HLMP-345x/-346x Series
Electrical Specifications at T
A
= 25°C
Symbol
2q
1/2
Description
Including Angle Between
Half Luminous Intensity
Points
Peak Wavelength
Dominant Wavelength
Spectral Line Halfwidth
Speed of Response
Capacitance
Thermal Resistance
Forward Voltage
Reverse Breakdown Voltage
Luminous Efficacy
Device
HLMP-
3466
Min.
Typ.
50
50
45
45
583
585
36
90
15
260
2.0
Max.
Units
Deg.
Test Conditions
Note 1
(Figure 16)
λ
PEAK
λ
d
Δλ
1/2
τ
s
C
Rq
J-PIN
V
F
V
R
η
V
nm
nm
nm
ns
pF
°C/W
2.4
V
V
Measurement at
Peak (Figure 1)
Note 2
V
F
= 0; f = 1 MHz
Junction to
Cathode Lead
I
F
= 10 mA
(Figure 12)
I
R
= 100
μA
Note 3
5.0
500
lm/W
Notes:
1.
q
1
/
2
is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
2. Dominant wavelength,
λ
d
, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the
device.
3. Radiant Intensity, I
e
, in watts/steradian may be found from the equation I
e
= I
v
/η
v
, where I
v
is the luminous intensity in candelas and
η
v
is the
luminous efficacy in lumens/watt.
5
电源技术
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
