Navigator
™
Motion
Processor
MC2300 Series
Technical Specifications
for Brushless Servo Motion Control
Performance Motion Devices, Inc.
55 Old Bedford Road
Lincoln, MA 01773
Revision 1.8, October 2003
NOTICE
This document contains proprietary and confidential information of Performance Motion Devices,
Inc., and is protected by federal copyright law. The contents of this document may not be disclosed
to third parties, translated, copied, or duplicated in any form, in whole or in part, without the express
written permission of PMD.
The information contained in this document is subject to change without notice. No part of this
document may be reproduced or transmitted in any form, by any means, electronic or mechanical,
for any purpose, without the express written permission of PMD.
Copyright 1998, 1999 by Performance Motion Devices, Inc.
Navigator
and
C-Motion
are trademarks of Performance Motion Devices, Inc
Warranty
PMD warrants performance of its products to the specifications applicable at the time of sale in
accordance with PMD's standard warranty. Testing and other quality control techniques are utilized
to the extent PMD deems necessary to support this warranty. Specific testing of all parameters of
each device is not necessarily performed, except those mandated by government requirements.
Performance Motion Devices, Inc. (PMD) reserves the right to make changes to its products or to
discontinue any product or service without notice, and advises customers to obtain the latest version
of relevant information to verify, before placing orders, that information being relied on is current
and complete. All products are sold subject to the terms and conditions of sale supplied at the time
of order acknowledgement, including those pertaining to warranty, patent infringement, and
limitation of liability.
Safety Notice
Certain applications using semiconductor products may involve potential risks of death, personal
injury, or severe property or environmental damage. Products are not designed, authorized, or
warranted to be suitable for use in life support devices or systems or other critical applications.
Inclusion of PMD products in such applications is understood to be fully at the customer's risk.
In order to minimize risks associated with the customer's applications, adequate design and operating
safeguards must be provided by the customer to minimize inherent procedural hazards.
Disclaimer
PMD assumes no liability for applications assistance or customer product design. PMD does not
warrant or represent that any license, either express or implied, is granted under any patent right,
copyright, mask work right, or other intellectual property right of PMD covering or relating to any
combination, machine, or process in which such products or services might be or are used. PMD's
publication of information regarding any third party's products or services does not constitute PMD's
approval, warranty or endorsement thereof.
MC2300 Technical Specifications
iii
MC2300 Technical Specifications
iv
Related Documents
Navigator Motion Processor User’s Guide (MC2000UG)
How to set up and use all members of the Navigator Motion Processor family.
Navigator Motion Processor Programmer’s Reference (MC2000PR)
Descriptions of all Navigator Motion Processor commands, with coding syntax and examples,
listed alphabetically for quick reference.
Navigator Motion Processor Technical Specifications
Four booklets containing physical and electrical characteristics, timing diagrams, pinouts, and pin
descriptions of each series:
MC2100 series, for brushed servo motion control (MC2100TS);
MC2300 series, for brushless servo motion control (MC2300TS);
MC2400 series, for microstepping motion control (MC2400TS);
MC2500 series, for stepping motion control (MC2500TS);
MC2800 Series, for brushed servo and brushless servo motion control (MC2800TS).
Navigator Motion Processor Developer’s Kit Manual (DK2000M)
How to install and configure the DK2000 developer’s kit PC board.
MC2300 Technical Specifications
v
聊聊、笑笑、闹闹
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
