Switching spark gap
SSG with lead wires
Series/Type:
Ordering code:
Version/Date:
FS08X-1GH
B88069X0340xxxx
a)
Issue 08 / 2006-08-30
Content of header bars 1 and 2 of data sheet will be automatically entered in headers and footers! Please fill in the
table and then change the color to "white" (or invisible). This ensures that the table disappears for the customer
PDF. To update the data sheet, click on the symbol "Preview" and then "Close". Please do not alter the header or
footer when copying the content.
Identification/Classification 1:
(header 1 + top left header bar)
Identification/Classification 2:
(header 2 + bottom left header bar)
Ordering code:
(top right header bar)
Series/Type:
(top right header bar)
Switching spark gap
SSG with lead wires
B88069X0340xxxx
FS08X-1GH
a)
EPCOS AG
(optional):
Preliminary data
2015. Reproduction, publication and dissemination of this publication, enclosures hereto and the information
contained therein without EPCOS' prior express consent is prohibited.
(if necessary)
Department:
Date:
EPCOS AG is a TDK Group Company.
KB AB E / KB AB PM
Issue 08 / 2006-08-30
Switching spark gap
SSG with lead wires
B88069X0340xxxx
a)
FS08X-1GH
Features
Applications
Ignition of HID lamps
Extremely long life time
Stable performance over life
Insensitive performance against variations in
temperature
Very low switching losses
Very short breakdown time
High reliability by robust design
RoHS compatibility
Electrical specifications
Nominal breakdown voltage V
N
Initial values
2)
Static breakdown voltage V
S 1)
First ignition value V
S, FTE
after 24 hours in darkness
Following ignition values V
S, FIV
Electrical life time
3)
Breakdown voltage V
B
up to 100 000 Ignitions
First ignition value V
B, FTE
after 24 hours in darkness
Ignition time t
I
at V
0
during life
Following ignition values V
B, FIV
at 50 000 Ignitions
Following ignition values V
B, FIV
Switching operations in total
at – 40; +150 °C, each
at + 25; +125 °C, each
Test circuit parameters
Open circuit voltage V
0
Loading resistance R
Discharge capacitance C
Inductance L
Discharge peak current I
P
General technical data
Insulation resistance at 100 V
Early ignition values between 530 ... 680 V
Breakdown time
Maximum loading current
Weight
Marking, blue positive
800
WW
Y
O
KB AB E / KB AB PM
Please read
Cautions and warnings
and
Important notes
at the end of this document.
Page 2 of 5
800
V
950
704 ... 896
V
V
1000
60
704 ... 920
680 ... 920
100 000
10 000
40 000
1000
56
114
0.13
~ 660
> 100
1
50
50
~2
V
ms
V
V
Ignitions
Ignitions
Ignitions
V
k
nF
µH
A
M
%
ns
mA
g
800 WWY O
- Nominal voltage
- Calendar week of production
- Year of production
- Non radioactive
Issue 08 / 2006-08-30
Important notes
The following applies to all products named in this publication:
1. Some parts of this publication contain
statements about the suitability of our products for
certain areas of application.
These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out
that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a
rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that
in individual cases, a malfunction of passive electronic components
or failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified.
In customer applications
requiring a very high level of operational safety and especially in customer applications in which
the malfunction or failure of a passive electronic component could endanger human life or health
(e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of
suitable design of the customer application or other action taken by the customer (e.g. installation
of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the
event of malfunction or failure of a passive electronic component.
3.
The warnings, cautions and product-specific notes must be observed.
4. In order to satisfy certain technical requirements,
some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as “hazardous”).
Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently,
the products described in this
publication may change from time to time.
The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also
reserve the right to discontinue production and delivery of products.
Consequently,
we cannot guarantee that all products named in this publication will always be available.
6.
Unless otherwise agreed in individual contracts,
all orders are subject to the current version of
the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, EPCOS-JONES, Baoke, CeraDiode, CSSP, MLSC, PhaseCap,
PhaseMod, SIFI, SIKOREL, SilverCap, SIMID, SIOV, SIP5D, SIP5K, UltraCap, WindCap are
trademarks registered or pending
in Europe and in other countries. Further information will be
found on the Internet at www.epcos.com/trademarks.
Page 5 of 5
DSP 与 ARM 处理器
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
