AS85049/140
Straight Lipped Sealing Heat Shrink Boot
Dash
Number
Table I
Material
Table II
See Note 2
B
AS85049
H Dia
Basic
Part Number
M85049/140
-
25
H
Adhesive
C
C
= Adhesive Lined
U
= No Adhesive
Table III
J Dia
As Supplied
T HW
H Dia
R
.120 (3.05)
Ref
P
JW
H
As Recovered
J Dia
See Note 2
© 2013 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
Mil-Spec Backshells
U.S. CAGE Code 06324
Rev. 8.29.14
Printed in U.S.A.
GLENAIR, INC.
•
1211 AIR WAY
•
GLENDALE, CA 91201-2497
•
818-247-6000
•
FAX 818-500-9912
www.glenair.com
B-148
E-Mail: sales@glenair.com
AS85049/140
Straight Lipped Sealing Heat Shrink Boot
TABLE I: Dash Number and Dimensions
J Dia
J Dia
P
R
T
HW
JW
Min
Max
(As Recovered) (As Recovered) (As Recovered) (As Recovered)
Max
(As Supplied) (As Recovered)
±10%
Ref
±10%
±20%
(As Recovered)
0.66 (16.8)
1.00 (25.4)
1.30 (33.0)
1.70 (43.2)
2.10 (53.3)
2.85 (72.4)
0.21 (5.3)
0.33 (8.4)
0.43 (10.9)
0.56 (14.2)
0.70 (17.8)
0.95 (24.1)
5.30 (134.6)
6.00 (152.4)
6.00 (152.4)
6.90 (175.3)
6.90 (175.3)
7.24 (183.9)
1.10 (27.9)
1.20 (30.5)
1.20 (30.5)
1.50 (38.1)
1.50 (38.1)
1.60 (40.6)
0.06 (1.5)
0.06 (1.5)
0.06 (1.5)
0.06 (1.5)
0.06 (1.5)
0.06 (1.5)
0.16 (4.1)
0.16 (4.1)
0.16 (4.1)
0.16 (4.1)
0.16 (4.1)
0.20 (5.1)
0.04 (1.0)
0.06 (1.5)
0.06 (1.5)
0.08 (2.0)
0.08 (2.0)
0.10 (2.54)
Dash
No.
23
24
25
26
27
28
H Dia
Min
(As Supplied)
0.84 (21.3)
1.00 (25.4)
1.30 (33.0)
1.70 (43.2)
2.10 (53.3)
2.85 (72.4)
H Dia
Max
(As Recovered)
0.55 (14.0)
0.65 (16.5)
0.80 (20.3)
0.90 (22.9)
1.10 (27.9)
1.45 (36.4)
B
TABLE II: Shrink Boot Materials
Material Compound
Code
A
B
G
H
2071
2040
2010
2025
Material Description
Flexible Polyolefin
General Purpose Polyolefin
Zero Halogen Polyolefin
High Performance Elastomer
Color
Code
WHITE
RED
GREEN
BLUE
TABLE III: Adhesive Description
Symbol
C
Adhesive Description
Zero Halogen / Hot Melt
APPLICATION NOTES
1.
See bag identification for matching boot
number, not number on boot. See part number
development for full description.
Encircled material letter designator located
on O.D. approximately mid length along the
“J” end. See part number development for full
description.
Metric dimensions (mm) are in parentheses.
2.
3.
© 2013 Glenair, Inc.
Dimensions in inches (millimeters) and are subject to change without notice.
Mil-Spec Backshells
U.S. CAGE Code 06324
Rev. 8.29.14
Printed in U.S.A.
GLENAIR, INC.
•
1211 AIR WAY
•
GLENDALE, CA 91201-2497
•
818-247-6000
•
FAX 818-500-9912
www.glenair.com
B-149
E-Mail: sales@glenair.com
AS85049
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
