24.77mm [0.975"]
15.88mm [0.625"]
LED16Q
rev **
27.57mm [1.085"]
McMaster/Carr
91185A558
CY8CLED16-OCD-24AXI
Description:
POD
56 pin SSOP OCD with Hirose cable connector (P/N:
DF12-5.0-20DP-0.5V-81) with retension mechanism included.
Compatible with:
SF-QFN48A-L-02B, QFN foot, 48 pin, 0.5mm pitch, 5mm body
XT-PSoC-15-20H-10-01
CY3250-LED16QFN
threaded inserts for mounting hardware
UGA Male pin shroud
1
Page:____of 2
EA-8CLED16-Q48-01 Drawing
© 2008 IRONWOOD ELECTRONICS, INC.
Tele: (800) 404-0204
www.ironwoodelectronics.com
Status: Released
Drawing: M. Tully
File: EA-8CLED16-Q48-01 Dwg
~3:1
Scale:______
Rev: A
Date: 4/23/08
Modified:
Tolerances: diameters ±0.03mm [±0.001”],
PCB perimeters ±0.13mm [±0.005”],
PCB thicknesses ±0.18mm [±0.007"],
pitches (from true position) ±0.08mm [±0.003"],
all other tolerances ±0.13mm [±0.005”]
unless stated otherwise. Materials and
specifications are subject to change without notice.
[+] Feedback
Strain Relief Hardware mounting directions
If the target board can be designed to accomodate the strain relief
hardware, layout the PCB with the pattern shown on the right. The
layout shows the location of non-plated holes through the board
relative to the QFN land pattern. If holes can not be added to the
target board, the screws can be used as standoffs and sit on the
top surface of the target PCB.
To ICE Pod
(-0.621",
0.488")
(0.375",
0.398")
(-0.277",
0.398")
QFN outline
Pad size:
0.3mmX0.78mm
[0.012" X 0.031"]
Shroud ouline
(keep away area)
10.09mm [0.397"]
sqr.
Pin 1
Flex Cable
19.06mm [0.750"]
(0.00",
0.00")
0.50mm
McMaster/Carr
91185A558
14.52mm [0.572"]
E-pad
10.8X10.8mm
(-0.277",
-0.398")
(0.375",
-0.399")
7.85mm [0.309"]
(-0.621",
-0.488")
Ø 1.78mm [Ø 0.070"]
±0.005"
Pod outline
27.57mm [1.085"]
5.12mm
[0.202"]
4.72mm
[0.186"]
0.93mm
[0.037"]
All component
heights ±0.020"
7.03mm
[0.277"]
Top View: Target Board component layout
notes:
1) Do not place components within the shroud outline unless they have a 0.035"
height or less off the target board and are outside the QFN package outline
2) All components under the POD outline must have a 0.180" height or or less
from the top of target board to avoid components on the bottom of the POD
board.
Side view:
CY3250-LED16QFN
Pod on QFN48 foot
2
Page:____of 2
EA-8CLED16-Q48-01 Drawing
© 2008 IRONWOOD ELECTRONICS, INC.
Tele: (800) 404-0204
www.ironwoodelectronics.com
Status: Released
Drawing: M. Tully
File: EA-8CLED16-Q48-01 Dwg
~4:1
Scale:______
Rev: A
Date: 4/23/08
Modified:
Tolerances: diameters ±0.03mm [±0.001”],
PCB perimeters ±0.13mm [±0.005”],
PCB thicknesses ±0.18mm [±0.007"],
pitches (from true position) ±0.08mm [±0.003"],
all other tolerances ±0.13mm [±0.005”]
unless stated otherwise. Materials and
specifications are subject to change without notice.
[+] Feedback
24.77mm [0.975"]
7.55mm [0.297"]
Microchip MCU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
