TYPE
NUMBER
PRODUCT SPECIFICATION
TITLE
PAGE
BUS-12-082
REVISION
Quickie™ Connector System
1 of 20
AUTHORIZED BY
DATE
F
31 Jul 06
M.Barrios
CLASSIFICATION
UNRESTRICTED
1.0
GENERAL
Scope
This specification covers the insulation piercing QuickieTM Connector designed for printed wiring board-to-
flat cable (round conductor) interconnection in low power applications. In all applications the mated system
(header to receptacle) plating should be gold to gold or tin to tin. The specification is composed of the
following sections.
Paragraph
1.0
2.0
3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
4.0
4.1
4.2
4.3
4.4
4.5
Title
GENERAL
APPLICABLE DOCUMENTS
REQUIREMENTS
Qualification
Material
Finish
Design and Construction
Electrical Characteristics
Mechanical Characteristics
Environmental Conditions
QUALITY ASSURANCE PROVISIONS
Equipment Calibration
Inspection Conditions
Qualification Inspection
Quality Conformance Inspection
Acceptance Inspection
Page
1
1
2
2
3
3
7
9
11
13
17
17
17
17
18
20
2.0
APPLICABLE DOCUMENTS
The following documents, of the issue in effect on the date of the latest revision of this specification, shall
form a part of this specification to the extent specified herein.
SPECIFICATIONS
Military
MIL-M-245l9
MIL-G-45204
MIL-G-45662
MIL-P-55110
Molding Plastics, Polyester, Thermoplastic
Gold Plating, Electrodeposited
Calibration System Requirement
Printed Wiring Boards
Copyright
Form E-3334
Rev E
FCI
GS-01-001
PDM: Rev:F
STATUS:
Released
Printed: Nov 28, 2010
.
TYPE
NUMBER
PRODUCT SPECIFICATION
TITLE
PAGE
BUS-12-082
REVISION
Quickie™ Connector System
2 of 20
AUTHORIZED BY
DATE
F
31 Jul 06
M.Barrios
CLASSIFICATION
UNRESTRICTED
Federal
QQ-N-290
QQ-W-343
QQ-B-750
QQ-S-763
QQ-C-533
STANDARDS
Military
MIL-STD-l05
MIL-STD-202
MIL-STD-275
MIL-STD-l344
Sampling Procedures and Tables for Inspection by Attributes
Test Methods for Electronic and Electrical Component Parts
Printed Wiring Board for Electronic Equipment
Test Methods for Electrical Connectors
Nickel Plating (Electrodeposited)
Wire, Electrical and Non-Electrical, Copper (Uninsulated)
Bronze, Phosphor; Bar, Plate, Rod, Sheet Strip, Flat Wire, and Structural and Special
Shaped Sections
Steel Bars, Shapes, and Forgings, Corrosion-Resisting.
Be - Cu
Industry Specifications/Standards
UL-94
Tests for Flammability of Plastic Materials
FCI Test Specifications
BUS-12-00l
3.0
REQUIREMENTS
3.1
Qualification
Connectors furnished under this specification shall be products capable of meeting the qualification
test requirements specified herein.
3.2
Material
The material for each part shall be as specified herein, or equivalent. Substitute material shall meet
the performance requirements of this specification.
3.2.1
3.2.2
Contact. Both the header and receptacle contact shall be full-hard phosphor bronze in
accordance with QQ-B-750, Composition A.
Latch. The standard Quickie shall have a plastic molded-in latch.
Round Conductor Flat Flexible Cable
Copyright
Form E-3334
Rev E
FCI
GS-01-001
PDM: Rev:F
STATUS:
Released
Printed: Nov 28, 2010
.
TYPE
NUMBER
PRODUCT SPECIFICATION
TITLE
PAGE
BUS-12-082
REVISION
Quickie™ Connector System
3 of 20
AUTHORIZED BY
DATE
F
31 Jul 06
M.Barrios
CLASSIFICATION
UNRESTRICTED
3.2.3
Plastic Parts. Except as subsequently specified, all molded plastic parts of the receptacle
connector and the mating header shall be filled polyester in accordance with MIL-M-
24519, Type GPT-30F. Except as noted, all plastic material shall be rated flame retardant
94V-0 in accordance with UL-94.
3.2.3.1
3.2.3.2
3.2.3.3
Header Locking Latches (Optional).
The latches shall be polyester in
accordance with MIL-M-24519, Type PT-F.
Strain Relief (Optional).
The strain relief shall be unfilled thermoplastic
material.
Keys (Optional).
The keys shall be unfilled Type 6-6 Nylon; the material
shall be rated flame retardant 94V-2 in accordance with UL-94.
3.3
Finish
The finish for each part shall be as specified herein. Substitute finishes shall meet the performance
requirements of this specification.
3.3.1
3.3.2
Both the header and receptacle contacts shall be plated with either gold per MIL-45204B,
GXT, or with tin-lead. Nickel shall be plated per QQ-N-290, Class 2.
QUICKIE II CONNECTOR SYSTEM
DUAL BEAM
PHOSPHOR BRONZE FEMALE CONTACT
Receptacle Contact
Mating Contact
Remainder of
Plating Designation
Portion
Terminal
___________________________________________________________
0.76um/30 u" Au
0.76um/30 u" Au Over
1.27um/50 u" Ni
1.27um/50 u" Ni
Copyright
Form E-3334
Rev E
FCI
GS-01-001
PDM: Rev:F
STATUS:
Released
Printed: Nov 28, 2010
.
TYPE
NUMBER
PRODUCT SPECIFICATION
TITLE
PAGE
BUS-12-082
REVISION
Quickie™ Connector System
4 of 20
AUTHORIZED BY
DATE
F
31 Jul 06
M.Barrios
CLASSIFICATION
UNRESTRICTED
FIGURE 1
Copyright
Form E-3334
Rev E
FCI
GS-01-001
PDM: Rev:F
STATUS:
Released
Printed: Nov 28, 2010
.
TYPE
NUMBER
PRODUCT SPECIFICATION
TITLE
PAGE
BUS-12-082
REVISION
Quickie™ Connector System
5 of 20
AUTHORIZED BY
DATE
F
31 Jul 06
M.Barrios
CLASSIFICATION
UNRESTRICTED
QUICKIE II HEADERS
AVAILABLE IN BOTH ROUND AND SQUARE PINS
SAME PLATING ON HEADER CONTACT AND SOLDER TAIL
Mating Contact
Pin Surface
Plating Designation
See Figure 1
Plating Detail
______________________________________________________________________
0.76um/30m" Au
0.76um/30m" GXT
ALL PIN SIDES
ALL PIN SIDES
0.76um/30 u" Au over
1.27um/50 u" Ni
0.69um/27 u" Pb-Ni
WITH 0.07um/3 u" Au
FLASH OVER 1.27um/50 u" Ni
QUICKIE III & EURO QUICKIE HEADERS
AVAILABLE IN SQUARE PIN CONFIGURATION
DUPLEX PLATING WITH THE FOLLOWING SOLDER TAIL
PLATING ON ALL VERSIONS - 3.81mm/150 u" MIN TIN-LEAD
Mating Contact
Pin Surface
Plating Designation
See Figure 1
Plating Detail
__________________________________________________________________________
TIN-LEAD
ALL PIN SIDES
3.81um/150 u" MIN
TIN-LEAD OVER
1.27um/50 u" Ni
0.69um/27 u" Pb-Ni with
0.07um/3 u" Au Flash
OVER 1.27um/50u" Ni
0.76um/30 u" Au OVER
1.27um/50 u"
1.27um/50 u" Au OVER
1.27um/50" Ni
0.76um/30 GXT
ALL PIN SIDES
0.76um/30 u" Au
1.27um/50 u" Au
ALL PIN SIDES
ALL PIN SIDES
3.4
Design and Construction
Copyright
Form E-3334
Rev E
FCI
GS-01-001
PDM: Rev:F
STATUS:
Released
Printed: Nov 28, 2010
.
分立器件
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
