I
Timers
I
02
I
www.crouzet-control.com
Output specification
Voltage breaking capacity
Electrical life (operations)
Mechanical life (operations)
Breakdown voltage acc. to IEC/EN 61812-1
Impulse voltage acc. to IEC/EN 60664-1, IEC/EN 61812-1
2 changeover relays, AgNi (cadmium-free)
250 VAC / 8 AAC resistive
250 VDC / 0,3 A resistive
10⁵
8 A 250 VAC resistive
10 x 10⁶
2,5 kV / 1 min / 1 mA / 50 Hz
5 kV
wave 1.2 / 50 μs
2 C/O
RQR1- RQR6 2 open contacts
General characteristics
Conformity to standards
IEC/EN 61812-1
IEC/EN 61000-6-1
IEC/EN 61000-6-2
IEC/EN 61000-6-3
IEC/EN 61000-6-4
Certifications
Temperature limits use (°C)
Temperature limits stored (°C)
Installation category
(acc. to IEC/EN 60664-1)
Creepage distance and clearance acc. to IEC/EN 60664-1
Protection (IEC/EN 60529)
Degree of protection acc. to IEC/EN 60529 Front face
Vibration resistance acc. to IEC/EN 60068-2-6
Relative humidity no condensation acc. to IEC/EN 60068-2-30
Electromagnetic compatibility - Immunity to electrostatic discharges
acc to IEC/EN 61000-4-2
Immunity to radiated, radio-frequency, electromagnetic field acc.
IEC/EN 61000-4-3
Immunity to rapid transient bursts acc. to IEC/EN 61000-4-4
Immunity to shock waves on power supply acc. to IEC/EN 61000-4-5
Immunity to radio frequency in common mode acc. to
IEC/EN 61000-4-6
Immunity to voltage dips and breaks acc. to IEC/EN 61000-4-11
Mains-borne and radiated emissions acc. to EN 55022 (CISPR22),
EN55011 (CISPR11)
Fixing : Symmetrical DIN rail
Terminal capacity Single-wire without ferrule
Terminal capacity Multi-wire with ferrule
Housing material
Shock test IEC/EN 60068-2-27
Short interruption on power line acc to IEC/EN 61000-4-11
4 kV / 3 mm
IP20
IP40
IP50
20 m/s² 10 Hz →150 Hz
93 % non-condensing
Level III (Air 8 kV / Contact 6 kV)
Level I (1 V/m : 2,0 G Hz →2,7 G Hz)
Level II (3 V/m : 1,4 G Hz →2,0 G Hz)
Level III (10 V/m : 80 M Hz →1 G Hz)
Level III (direct 2 kV / Capacitive coupling clamp 1 kV)
Level III (2 kV / common mode 2 kV/residual current mode 1 kV)
Level III (10V rms : 0.15 M Hz to 80 M Hz)
0 % residual voltage, 1 cycle
70 % residual voltage, 25/30 cycles
Class B
35 mm
1 x 0,5 →3,3 mm² (AWG 20 →AWG 12)
2 x 0,5 →2,5 mm² (AWG 20 →AWG 14)
1 x 0,5 →2,5 mm² (AWG 20 →AWG 14)
2 x 0,5 →1,5 mm² (AWG 20 →AWG 16)
Self-extinguishing
15 g - 11 ms
0 % residual voltage, 250/300 cycles
CE, UL, cUL, CSA, GL
-20 →+60
-30 →+60
Voltage surge category III
工业自动化与控制
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
