Subminiature, LAN Modular Jack Connectors
TM11R-5M2 Series
Dec.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
s
Features
1.Fast Ethernet Support
Conforms to the TIA/EIA-568-A data wiring standard and
meets requirements of CAT5 transmission performance
for 1,2-3,6 conductor pairs. As such, these products fully
support Fast Ethernet (100BASE-TX) transmission.
13.4
24
16
21
2. Subminiature Design Contributes to Saving
Space in the Equipment
Having built-in optical indicators, with height of only
11.5mm, width of 15mm and depth of 17.5mm the
connectors can be used in extremely limited spaces.
Other series
TM21R--5C--88--LP
17.5
15
14.5
3. Built-in Optical Indicators
Optical indicators are integral part of the connectors help
saving space on customer’s board.
Compared with LED type indicators, they do not emit any
electrical noise.
TM11R--5M2--88--LP
Space saving
4. EMI protection
Metal shield covers the outer surfaces of the connectors
assuring complete protection against electromagnetic
interference.
Built-in multiple shield and ground contacts assure
reliable connection with the mounting panel as well as
with the mating connectors.
housing
LED optical indicators are taking place
5. Environmental considerations
Plating is lead-free in order to protect environment.
6. FCC Standards
Meets requirements of FCC Title 47, Part 68, Subpart F.
EMI protection
s
Applications
Telecom Hubs, Routers, Bridges and ATM Transmission
Equipment, Ethernet Switches and Networking Equipment,
Test and Measurement Equipment, Medical Diagnostic
Equipment.
11.5
Built-in LED type
(Possibility of electromagnetic
noise emission and interference.)
Built-in Optical pipe type
(No electromagnetic
noise emission.)
2012.6
1
TM11R-5M2 SeriesqSubminiature, LAN Modular Jack Connectors
sProduct
Specifications
Current rating
Rating
Voltage rating
125 V AC
1A
Operating temperature range : -25
ç
to +80
ç
(Note)
Item
1. Insulation resistance
2. Dielectric Withstanding Voltage
(between adjacent contacts)
100 M ohms min.
Specification
100 V DC
Conditions
No flashover or insulation breakdown
No flashover or insulation breakdown
230 m ohms max.
No electrical discontinuity of 5
µ
sec. or more.
Contact resistance: 250m ohms max.
No electrical discontinuity of 5
µ
sec. or more.
Contact resistance: 250m ohms max.
Contact resistance: 250m ohms max.
Contact resistance: 250 m ohms max.
Insulation resistance: 100 M ohms min.
Contact resistance: 250 m ohms max.
Insulation resistance: 1 M ohms min. (High humidity)
Insulation resistance: 10 M ohms min. (Dry state)
Contact resistance: 250 m ohms max.
500 V AC applied for one minute
1500 V AC / one minute
100mA
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm,
2 hours / 3 axis
Acceleration of 490 m/s
2
, 11 ms duration,
sine half-wave waveform, 3 cycles in each of the 3 axis
200 cycles
Temperature: -55
ç
/+15
ç
to +35
ç
/+85
ç
/+15
ç
to +35
ç
Duration: 30/2 to 3/30/2 to 3(Minutes)
5 cycles
500 hours at temperature of 40
ç
and humidity of 90% to 95%
Exposed to density 5% salt water for 48 hours
Dec.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
3. Withstanding voltage
(between contact and shield)
4. Contact resistance
5. Vibration
6. Shock
7. Durability
(mating/un-mating)
8. Temperature cycle
9. Humidity
10. Salt Spray
Note :Includes temperature rise caused by current flow.
sMaterials
Part
Insulator
Contact
Optical pipe
Shield
Material
PBT
Copper alloy
Polycarbonate
Copper alloy
Finish
Color: Black
Contact area: Gold plating
Termination area: Tin alloy plating
Color: Transparent
Tin plating
Remarks
UL94V-0
-------
UL94V-0
-------
sOrdering
information
q
Jacks
TM11 R - 5M2 - 8 8 - LP
1
2
3
4 5
6
1
Series name
2
Connector type
3
Jack type
TM11 Series
R: Jack
5M2: PCB Right-angle through hole type
4
Jack opening code 8: 8 contacts
5
Number of inserted contacts
6
Optical pipe
8: 8 contact
LP: With optical pipe inserted
Blank: Without optical pipe
2
TM11R-5M2 SeriesqSubminiature, LAN Modular Jack Connectors
s
Modular Jack Connectors Supporting CAT5e (for 1,2-3,6 pair)
q
Single Port With Built-in Optical Pipe
Contact No. 8
Contact No. 1
0.8
15
14.5
( 4.25 )
11.5
11.5
3
3.6
0.6
0.45
11.4
0.25
(2)
1
5.55
0.3
Dec.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
14.75
3.1
11.25
0.8
0.8
17.5
Part Number
TM11R-5M2-88-LP
CL No.
222-2905-0
RoHS
(4.25)
YES
2.54
TM11R--5M2 1 PC
Contact No. 8
11.1
Contact No. 7
Contact No. 1
Contact No. 2
q
Single Port Without Optical Pipe
14.5
0.8
15
Contact No. 8
Contact No. 1
(4.25)
11.5
3.1
(4.25)
3
3.6
0.6
11.5
0.45
11.4
14.75
0.25
(2)
1
5.55
3.1
0.3
0.8
0.8
Part Number
TM11R-5M2-88
CL No.
222-2906-2
RoHS
(4.25)
YES
2.54
Contact No. 8
Contact No. 7
Contact No. 1
Contact No. 2
3.1
(4.25)
1.7
3
TM11R-5M2 SeriesqSubminiature, LAN Modular Jack Connectors
BRecommended
PCB mounting patterns
q
With Built-in Optical Pipe
11.1
8.89
6.35
3.81
1.27
LED location area
LED light emission area
Contact No.
1
No conductive traces
8-Ø1
7 5 3 1
3.1
8 6 4 2
2-Ø1.6
2- Ø2.4
Printed board edge
Connector front edge
11.4
14.75
2
q
Without Optical Pipe
8.89
6.35
3.81
1.27
2.54
8- Ø1
1
No conductive traces
Contact No.
3.1MAX
11.4 MAX
2.54
11.25
Dec.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
3.1MAX
11.4 MAX
5 MIN
7
5
6
4
3
2
1
3.1
8
2 MIN
5MIN
2
2- Ø1.6
2-Ø2.4
11.4 MIN
18.1MIN
Printed board
edge
Connector
front edge
11.4
14.75
No conductive &
ground traces
No conductive &
ground traces
2MIN
11.4 MIN
18.1 MIN
4
LED light emitting center
Suggested LEDs
2.7 MAX
3.2MAX
1.5 MAX
*
Recommendations for PCB Design
1
Areas indicated should be free of conductive traces.
2
Area indicated should be free of conductive & ground traces.
3
Recommended board thickness: 1.6mm.
To assure that the indicator light pipes operates correctly the LED’s must be installed directly on the PCB, within
4
recommended dimensions and with light emitting center in upward direction.
Contact applicable manufacturer for LED specification.
BPanel
Cutout
q
For Both Types, With and Without Built-in Optical Pipe
(33)
Lock lever
15.4
1
3±1
1
TM21P--88P
1MIN
1
4.5MIN
0.3
Panel side
12
PCB mounting surface
1
Connector front surface
1
0
2
-0.7
3.1MAX
*
Recommendations for Panel Design
1
The shield contacts should connect with the panel cut-out on all sides.
5.55
Note: IPA cleaning at room temperature is recommended for the cleaning of this product.
When an aqueous cleaning agent is to be used, there is a concern that the light pipe (made of polycarbonate
resin) may change color; therefore, please make a selection based on a table showing the effects on the resin.
These tables are issued by the various manufacturers of cleaning agents.
4
TM11R-5M2 SeriesqSubminiature, LAN Modular Jack Connectors
BCAT5
Transmission Characteristics Data
For fully mated receptacle (TM11R-5M2-88-LP) and plug (TM21P-88P).
q
Signal Attenuation
0.5
0.4
Attenuation(dB)
0.3
0.2
0.1
0
0
20
40
60
80
100
Frequency(MHz)
1,2
3,6
CAT5 Spec
Dec.1.2017 Copyright 2017 HIROSE ELECTRIC CO., LTD. All Rights Reserved.
q
Near-End Crosstalk (NEXT)
90
80
70
60
50
40
30
20
10
0
0
20
40
60
80
100
Frequency(MHz)
1,2-3,6
CAT5 Spec
q
Return Loss
80
70
60
50
40
30
20
10
0
0
20
1,2
40
60
Frequency(MHz)
3,6
CAT5 Spec
80
100
Return Loss(dB)
NEXT(dB)
5
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
