LNJ03004BDD1
Surface Mounting Chip LED
3230 Type
Absolute Maximum Ratings
T
a
= 25°C
Parameter
Power dissipation
Forward current
*1
Pulse forward current
*2
Junction temperature
Operating ambient temperature
Storage temperature
Symbol
P
D
I
F
I
FP
T
j
T
opr
T
stg
Rating
430
120
200
110
–30 to +85
–40 to +100
Unit
mW
mA
mA
°C
°C
°C
Lighting Color
White (6 500 [Kelvin])
Note) *1: I
F
is different by radiated factor of evaluation board.
This value is mounted on evaluation board at Rthj-a = 25.0
°C/W.
*2: The condition of pulse current I
FP
is 55 ms pulse width, 10 % duty.
Electro-Optical Characteristics
T
a
= 25°C±3°C
Parameter
Forward voltage
*1
Luminous flux
*2
Chromaticity coordinates
*3
Color Rendering Index
Symbol
V
F
F
x
y
Ra
I
FP
= 60 mA
I
FP
= 60 mA
I
FP
= 60 mA
I
FP
= 60 mA
I
FP
= 60 mA
Conditions
Min
2.7
22.0
Typ
2.95
26.5
0.313
0.330
82
Max
3.2
30.0
Unit
V
lm
Note) *1: Complete Forward Voltage measurement within 0.1 seconds. Tolerance
±3%
*2: Complete Luminous flux measurement within 0.1 seconds. Tolerance
±10%
*3: Complete Chromaticity coordinates measurement within 0.1 seconds. Tolerance of chromaticity is
±0.01
60
50
40
30
20
10
0
F
I
FP
Pulse forward current I
FP
(mA)
150
I
FP
V
F
Relative Luminous Flux (%)
120
100
80
60
40
20
0
−40
Relative Luminous Flux
T
a
Luminous Flux F (lm)
100
50
0
50
100
150
0
2.6
2.8
3.0
3.2
3.4
−20
0
20
40
60
80
100
Pulse forward current I
FP
(mA)
Forward voltage V
F
(V)
Ambient temperature T
a
(°C)
Relative Spectral Power
Wavelength
1.2
Y
I
F
T
a
120
X
Y
Relative Spectral Power (a.u.)
0.8
Directive characteristics
0°
80
60
40
20
10° 20°
30°
40°
50°
60°
0.6
0.4
0.2
0
350
Relative luminous intensity (a.u.)
1.0
0.8
0.6
0.4
0.2
−90
−60
−30
Forward current I
F
(mA)
1.0
X
80
40
70°
80°
0.2
0.4
0.6
0.8
90°
1.0
0
0
20
40
60
80
100
500
650
800
0
Wavelength (nm)
Radiation Angle (deg)
Relative luminous intensity (a.u.)
Ambient temperature T
a
(°C)
Publication date: June 2014
Ver. CEK
1
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1)
If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2) The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any
other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any
other company which may arise as a result of the use of technical information described in this book.
(3) The products described in this book are intended to be used for general applications (such as office equipment, communications
equipment, measuring instruments and household appliances), or for specific applications as expressly stated in this book.
Consult our sales staff in advance for information on the following applications:
–
Special applications (such as for airplanes, aerospace, automotive equipment, traffic signaling equipment, combustion equipment,
life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of
the products may directly jeopardize life or harm the human body.
It is to be understood that our company shall not be held responsible for any damage incurred as a result of or in connection with
your using the products described in this book for any special application, unless our company agrees to your using the products in
this book for any special application.
(4) The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company.
20100202
电子竞赛
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
