NLP65 Series
Data Sheet
Total Power: 65 - 75 W
Input Voltage: 85-264 VAC
120-370 VDC*
# of Outputs: Single, dual, triple
SPECIAL FEATURES
Universal Input
3” x 5” footprint
Low profile fits 1U applications
EN61000-3-2 compliance option (HCC)
Overvoltage and short circuit protection
65 W with free air convection cooling
EN55022, EN55011 conducted
emissions level B
EN61000-4-2,-3,-4, -5, -6
immunity compliant
RoHS compliant
LPX80 enclosure kit available
2 year warranty
Single, dual and triple output
Electrical Specifications
Input
Input voltage range:
Input frequency range:
Input current:
(cold start)
Safety ground leakage current:
Input current:
120 Vac
230 Vac
120 Vac, 60 Hz
230 Vac, 50 Hz
120 Vac, with PFC
230 Vac, with PFC
120 Vac, without PFC
230 Vac, without PFC
UL/IEC127
Main output
Auxiliary outputs
At turn-on
Main output
25% step
at 0.1 A/μs
Main outputs
Cyclic operation
Single and multiple
Universal input (see Note 2)
NLP65-76xx version only
85-264 Vac
120-370 Vdc
47-63 Hz
17 A max.
32 A max
0.7 mA
1.4 mA
1.4 A
0.51 A rms
1.40 A rms
0.80 A rms
5 A, 250 Vac In live and neutral
±2.0%
±5.0%
1.0 s, max
5.0% or 250 mV
max. dev., 1ms max.
recovery to 1%
±0.02%/°C
125%, ±10%
Continuous
(See Note 6)
SAFETY
VDE0805/EN60950-1
File No. 1040100-3336-0096
License No. 114404
UL
60950-1
cUL
60950-1
CCC
60950-1
CE
LVD Directive
*NLP65-76xx version only
Input fuse:
Output
Total regulation:
(line and load)
Rise time:
Transient response:
Temperature coefficient:
Overvoltage protection:
Short circuit protection:
Minimum output current:
NLP65 Series Data Sheet
All specifications are typical at nominal input, full load at 25 °C unless otherwise stated.
EMC Charateristics
(11, 12)
Conducted emissions:
ESD air:
EN55022, FCC part 15
EN61000-4-2, level 3
Level B
Perf. criteria 1
Perf. criteria 1
Perf. criteria 1
Perf. criteria 1
Perf. criteria 2
Perf. criteria 2
16 ms @ 65 W
78 ms @ 65 W
72% typical
3000 Vac
1500 Vac
100 kHz, ±5 kHz
ESD contact:
Surge:
Fast transients:
Radiated immunity:
Conducted immunity:
EN61000-4-2, level 4
EN61000-4-5, level 3
EN61000-4-4, level 3
EN61000-4-3, level 3
EN61000-4-6, level 3
120 Vac, 60 Hz
230 Vac, 50 Hz
120 Vac, 65 W
Input/output
Input/chassis
Fixed
EN60950-1, IEC60950-1
283 g (10 oz)
MIL-HDBK-217F
General Specifications
Hold-up time:
Efficiency:
Isolation voltage:
Switching frequency:
Approvals and standards:
(see Notes 9, 13)
Weight:
MTBF demonstrated:
150,000 hours min
Environmental Specifications
Thermal performance:
(See notes 1, 3, 10)
Operating (See derating curve)
Non-operating
50 °C - 70 °C ambient, convection cooled
0 °C to 50 °C, ambient, convection cooled
0 °C to 50 °C, ambient 20CFM forced air (See Note 10)
Peak (0 °C to 50 °C, 60 s)
Relative humidity:
Altitude:
Vibration (See Note 5):
Shock
Non-condensing
Operating
Non-operating
5-500 Hz
per MIL-STD-810E
0° C to +70 °C
-40 °C to +85 °C
Derate to 50% load
65 W
75 W
See table
5 to 95% RH
10,000 feet max.
30,000 feet max.
2.4 G rms peak
516.4 Part IV
NLP65 Series Data Sheet
Output
Voltage
+5 V (IA)
+12 V (IB)
–12 V
+5 V (IA)
+15 V (IB)
–15 V
+5 V
+24 V
+12 V
+5 V (IA)
+24 V (IB)
+5 V (IA)
+12 V (IB)
+5 V
+12 V
+24 V
Output Current
Max
(1)
7.5 A
2.5 A
0.65 A
7.5 A
2.2 A
0.65 A
7.0 A
1.5 A
0.7 A
7A
2A
7A
2.5 A
10 A
5.4 A
2.7 A
Peak
(3)
9.1 A
3.3 A
0.81 A
9.1 A
2.9 A
0.85 A
9.1 A
2.6 A
1.0 A
9.1 A
2.6 A
9.1 A
3.3 A
13 A
7A
3.5 A
Fan
(10)
8A
3A
0.8 A
8A
2.5 A
0.8 A
8.0 A
2.0 A
1.0 A
8A
2A
8A
3A
12 A
6.5 A
3.5 A
Ripple
(4)
50 mV
150 mV
120 mV
50 mV
150 mV
150 mV
50 mV
240 mV
120 mV
50 mV
240 mV
50 mV
150 mV
50 mV
120 mV
240 mV
Total
Regulation
(6)
±2.0%
±5.0%
±5.0%
±2.0%
±5.0%
±5.0%
±2.0%
±5.0%
±5.0%
±2.0%
±5.0%
±2.0%
±5.0%
±2.0%
±2.0%
±2.0%
Non-Harmonic
Corrected
NLP65-7608J
Harmonic
Corrected
NLP65-9608J
(a)
Ground
Pin
(12, 14, 17)
NLP65-X608GJ
NLP65-7610J
NLP65-9610J
NLP65-X610GJ
NLP65-3322J
(15)
NLP65-7620J
NLP65-7629J
NLP65-7605J
NLP65-7612J
NLP65-7624J
NLP65-9620J
NLP65-9629J
NLP65-9605J
NLP65-9612J
NLP65-9624J
NLP65-X620GJ
NLP65-X629GJ
NLP65-X605GJ
NLP65-X612GJ
NLP65-X624GJ
Notes
1. Natural convection cooling. Models NLP65-X629J, NLP65-X608J, NLP65-X610J must not exceed 62.5 Watts continuous output power with
natural convection. Model NLP65-X620J not to exceed 65 Watts continuous output power with natural convection. Model NLP65-3322J must
not exceed 60 Watts continuous output power with natural convection.
2. When the input voltage is less than 90 Vac the operating temperature range is 0 °C to +40 °C. The ripple and regulation specifications may not
be met.
3. Peak output current lasting less than 60 seconds with duty cycle less than 5%. During peak loading, output voltage may exceed total regulation
limits.
4. Figure is peak-to-peak for convection power rating. Output noise measurements are made across a 20 MHz bandwidth using a 6 inch twisted
pair, terminated with a 10 μF electrolytic capacitor and a 0.1 μF ceramic capacitor.
5. Three orthogonal axes, random vibration 10 minutes for each axes, 2.4 G rms 5 Hz to 500 Hz.
6. A minimum load on the main output is required for proper start up. For multiple outputs and single +5V output, the minimum load on the +5 V is
0.2 A. For single outputs greater than +5 V the minimum load is 0.1 A. To maintain stated regulation then:
for single output units
I ≥ 0.2 A
for multiple output units
0.25≤I(A)/I(B)≤ 5, for I(A) ≥ 0.2 A.
7. For optimum reliability, no part of the heatsink should exceed 120 °C, and no semiconductor case temperature should exceed 130 °C.
8. CAUTION: Allow a minimum of 1 second after disconnecting line power when making thermal measurements.
9. This product is only for inclusion by professional installers within other equipment and must not be operated as a stand alone product.
10. Maximum continuous output power for all multiple output models must not exceed 75 Watts (70 watts for NLP65-3322J) with 20 CFM forced
air cooling.
NLP65 Series Data Sheet
11. Conducted emissions testing were performed using the standard EN55022 set-up with a stand alone NLP65 unit placed on a grounded metal
plate with a line choke on the AC input and ground wires (i.e. the wires are looped through an EMI suppression toroid).
For system compliance it is usually necessary to install an ‘off-the-shelf’ AC inlet with an integral line filter in the system chassis or to install a
line choke on the input wires as close as possible to AC entry point of the system chasssis. Please contact the applications group for assis-
tance with EMI compliance.
12. The NLP65 units with the suffix ‘G’ is the ground pin and ground choke option. J2, L6 and JP10 are included. J2 is a safety agency approved
grounding pin, L6 is a ground choke and JP10 is a jumper. This option is intended for use in non-metallic chassis applications where grounding
is not possible via the mounting screws. The ground choke is provided to assist system EMC compliance. When performing conducted
emissions testing on stand alone units, the ‘G’ option is required to meet level B. To order simply add the suffix ‘G’ to the standard model
number, e.g. NLP65-7608GJ, NLP65-9608GJ. This option is available for both the PFC and non-PFC versions.
13. All models require a minimum mounting stand-off of 0.25 inches (6.35 mm) in the end use product.
14. The NLP65-9608J is available with an enclosure. To order an enclosed version, use NLP65-9608EJ.
15. No PFC version, EN61000-3-2 is not applicable to this model.
16. The ‘J’ suffix indicates that these parts are Pb-free (RoHS 6/6) compliant.
17. NOTICE: Some models do not support all options. Please contact your local Artesyn Embedded Technologies representative or use the on-line
model number search tool at http://www.artesyn.com/power
Model Numbering Options
a) The enclosure version NLP65-9608EJ includes: IEC connector, on/off switch, wire harness output connector and fitted cover. To order, please
add the suffix ‘E’ the model number. See NLP65 enclosure for details.
b) A Safety earth ground pin and ground choke are available as an option.
To order, please add the suffix ‘G’ the model number, e.g. NLP65-X608GJ.
c) To order an enclosure kit (unfitted), order the part number LPX80.
Mechanical Drawing
5.00
(127.00)
4.550
(115.57)
J1
3 N
1 L
3.00
(76.20)
J2
C19
6
T
1
T1
2.550
(64.770)
0.225
(5.715)
J3
1
Mounting
Hole Diameter
0.156 (4.00)
ALL DIMENSIONSIN INCHES (mm)
MAXIMUM COMPONENT
HEIGHT 1.26 (32.00)
TOLERANCE: .xxx
0.005"
.xx
0.02"
NLP65 Series Data Sheet
Input Pin Connections
J1
Pin 1
Pin 2
Pin 3
J2 (On ‘G’ Suffic Only)
Pin 1
Safety Ground
AC Line
No Pin
AC Neutral
Output Pin Connections
J3
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
SINGLE
V (A)
V (A)
V (A)
Return
DUAL
V (B)
V (A)
V (A)
Return
Return
TRIPLE
V (B)
V (A)
V (A)
Return
Return
V (C)
Return
Return
N/C
Input and Output Connectors
AC (J1)
DC (J3)
Molex 26-60-4030 type or equivalent
Molex 26-60-4060 or equivalent
Mating Connectors
Molex 09-50-3031 or equivalent with Molex 08-52-0113 or equivalent crimp terminals
Molex 09-50-3061 with Molex 2478 phosphor bronze crimp terminals or equivalent.
WORLDWIDE OFFICES
Americas
2900 S.Diablo Way
Tempe, AZ 85282
USA
+1 888 412 7832
Europe (UK)
Waterfront Business Park
Merry Hill, Dudley
West Midlands, DY5 1LX
United Kingdom
+44 (0) 1384 842 211
Asia (HK)
14/F, Lu Plaza
2 Wing Yip Street
Kwun Tong, Kowloon
Hong Kong
+852 2176 3333
www.artesyn.com
For more information:
www.artesyn.com/power
For support:
productsupport.ep@artesyn.com
NLP65 Series-DS 06.18.14
While every precaution has been taken to ensure accuracy and completeness in this literature, Artesyn
Embedded Technologies assumes no responsibility, and disclaims all liability for damages resulting from use of
this information or for any errors or omissions. Artesyn Embedded Technologies, Artesyn and the Artesyn
Embedded Technologies logo are trademarks and service marks of Artesyn Embedded Technologies, Inc. All other
names and logos referred to are trade names, trademarks, or registered trademarks of their respective owners.
© 2014 Artesyn Embedded Technologies, Inc.
LED专区
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
