Datasheet -- SX30GD2
SX30GD2
Pressure Sensors: Measurement Type: Gage; 0 psid to 30
psid, Unamplified, "D2" DIP Package - Straight Port
Features
q
q
Representative
photograph, actual
product appearance
may vary.
Due to regional
agency approval
requirements, some
products may not be
available in your area.
Please contact your
regional Honeywell
office regarding your
product of choice.
q
q
q
Low Cost
High-Impedance Bridge
Absolute and Differential (Gauge)
Low Noise
Low Power Consumption for Battery Power
Typical Applications
q
q
q
q
q
q
Medical
Instrumentation
Barometric
Measurement
Pneumatic Controls
Battery Powered Equipment
Description
The SX Series pressure sensors provide the lowest cost components
for measuring pressures up to 150 psi. These sensors are designed
for use with non-corrosive, non-ionic media, such as air and dry
gases. Convenient pressure ranges are available to measure
differential, gauge, and absolute pressures from 0 psi to 1 psi
(SX01) up to 0 psi to 150 psi (SX150).
The Absolute (A) devices have an internal vacuum reference and an
output voltage proportional to absolute pressure. The differential
(D) devices allow application of pressure to either side of the
diaphragm and can be used for gauge or differential pressure
measurements.
This product is packaged in either the standard low cost chip carrier
“button” package, a plastic ported “N” package, or a DIP package.
file:///C|/Documents%20and%20Settings/rabab/Desktop/Datasheet%20--%20SX30GD2.htm (1 of 5)15/03/2005 03:17:48 ã
Datasheet -- SX30GD2
All packages are designed for applications where the sensing
element is integral to the OEM equipment. These packages can be o-
ring sealed, epoxied, and/or clamped onto a pressure fitting. A
closed-bridge four pin SIP configuration is provided for electrical
connection to the “Button” or “N” Package. The DIP Package mounts
on a PC board like a standard IC with through-hole pins. This
extremely small size package enables the use of multiple sensors in
applications with limited space.
SX30GD2
Pressure Sensors: Measurement Type: Gage; 0 psid to 30 psid, Unamplified, "D2" DIP
Package - Straight Port
Product Specifications
Measurement Type
Signal Conditioning
Pressure Range
Maximum Overpressure
Supply Voltage
Compensated
Output Calibration
Response Time
Termination
Port Style
Package Style
Typical Sensitivity
Full Scale Span
Zero Pressure Offset
Linearity, Repeatability & Hysteresis
Error
Repeatability
Input Resistance
Output Resistance
Gage
Unamplified
0 psid to 30 psid
90 psi
12 Vdc max.
No
No
100 µS
PCB
Straight
D2 DIP
0.75 mV/V/psi
75 mV min., 110 mV typ., 150 mV max.
-35.0 mV min., -20.0 mV typ., 0.0 mV max.
- 0.5 min., 0.2 typ., 0.5 max. % Full Scale
Span
0.5 % span
4.1 kOhms typ.
4.1 kOhms typ.
file:///C|/Documents%20and%20Settings/rabab/Desktop/Datasheet%20--%20SX30GD2.htm (2 of 5)15/03/2005 03:17:48 ã
Datasheet -- SX30GD2
Operating Temperature Range
Storage Temperature Range
Media Compatibility
UNSPSC Code
UNSPSC Commodity
Comment
Availability
Series Name
-40 °C to 85 °C [-40 °F to 185 °F]
-55 °C to 125 °C [-67 °F to 257 °F]
Clean, dry gases only
411121
411121 Transducers
Lead Temperature Soldering 2 s to 4 s at 250
°C [482 °F]
Global
SX Series
SX30GD2
Pressure Sensors: Measurement Type: Gage; 0 psid to 30 psid, Unamplified, "D2" DIP
Package - Straight Port
file:///C|/Documents%20and%20Settings/rabab/Desktop/Datasheet%20--%20SX30GD2.htm (3 of 5)15/03/2005 03:17:48 ã
Datasheet -- SX30GD2
SX30GD2
Pressure Sensors: Measurement Type: Gage; 0 psid to 30 psid, Unamplified, "D2" DIP
Package - Straight Port
[Electrical Connections]
SX30GD2
Pressure Sensors: Measurement Type: Gage; 0 psid to 30 psid, Unamplified, "D2" DIP
Package - Straight Port
[Equivalent circuit]
SX30GD2
Pressure Sensors: Measurement Type: Gage; 0 psid to 30 psid, Unamplified, "D2" DIP
Package - Straight Port
PERSONAL INJURY
DO NOT USE these products as safety or emergency stop devices, or in any other
application where failure of the product could result in personal injury.
Failure to comply with these instructions could result in death or serious injury.
file:///C|/Documents%20and%20Settings/rabab/Desktop/Datasheet%20--%20SX30GD2.htm (4 of 5)15/03/2005 03:17:48 ã
Datasheet -- SX30GD2
MISUSE OF DOCUMENTATION
q
q
The information presented in this product sheet (or catalog) is for reference only.
DO NOT USE this document as product installation information.
Complete installation, operation and maintenance information is provided in the
instructions supplied with each product.
Failure to comply with these instructions could result in death or serious injury.
© Copyright Honeywell Inc.1998-2004 All rights reserved.
file:///C|/Documents%20and%20Settings/rabab/Desktop/Datasheet%20--%20SX30GD2.htm (5 of 5)15/03/2005 03:17:48 ã
微控制器 MCU
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
