MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
Professional Metal Film Leaded Resistors
FEATURES
• CECC version (IECQ-CECC
according to EN 140101-806)
approved
• Excellent overall stability: class 0.25
• Wide ohmic range: 0.22
to 22 M
• AEC-Q200 qualified available
(1)
• Radial version available for MBB/SMA 0207
• Alternative termination wires available e.g. weldable wire
(MBA/SMA 0204 only)
• Material categorization: for definitions of compliance
please see
www.vishay.com/doc?99912
Note
(1)
AEC-Q200 qualified parts are available per tables “Temperature
Coefficient and Resistance Range”.
DESCRIPTION
MBA/SMA 0204, MBB/SMA 0207, and MBE/SMA 0414
professional leaded thin film resistors are the general
purpose resistor for all fields of professional electronics
where reliability and stability is of major concern. Typical
applications
include
industrial,
telecommunication,
automotive, and medical equipment.
APPLICATIONS
• Industrial
• Telecommunication
• Medical equipment
• Automotive
TECHNICAL SPECIFICATIONS
DESCRIPTION
DIN size
CECC size
Resistance range
Resistance tolerance
Temperature coefficient
Rated dissipation,
P
70 (2)
Operating voltage,
U
max.
AC/DC
Operating temperature range
(2)
Peak permissible film temperature
(2)
Insulation voltage:
1 min.;
U
ins
Continuous
Failure rate: FIT
observed
300 V
75 V
0.1 x 10
-9
/h
500 V
75 V
0.1 x 10
-9
/h
800 V
75 V
0.1 x 10
-9
/h
155 °C
0.4 W
200 V
MBA/SMA 0204
0204
A
0.22
to 10 M; 0
MBB/SMA 0207
0207
B
0.22
to 22 M; 0
± 5 %; ± 1 %; ± 0.5 %
± 50 ppm/K; ± 25 ppm/K
0.6 W
350 V
-55 °C to 155 °C
155 °C
155 °C
1.0 W
500 V
MBE/SMA 0414
0414
D
0.22
to 22 M
Notes
• MB_ series has been merged with the related SMA series to form one series “MB_/SMA__”.
(2)
Please refer to APPLICATION INFORMATION below.
Revision: 12-Feb-16
Document Number: 28766
1
For technical questions, contact:
filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
APPLICATION INFORMATION
The power dissipation on the resistor generates a temperature rise against the local ambient, depending on the heat flow
support of the printed-circuit board (thermal resistance). The rated dissipation applies only if the permitted film temperature is
not exceeded. Furthermore, a high level of ambient temperature or of power dissipation may raise the temperature of the solder
joint, hence special solder alloys or board materials may be required to maintain the reliability of the assembly.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift
increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a
functional lifetime. The designer may estimate the performance of the particular resistor application or set certain load and
temperature limits in order to maintain a desired stability.
Vishay Beyschlag
MAXIMUM RESISTANCE CHANGE AT RATED DISSIPATION
Operation mode
Climatic category
MBA/SMA 0204
Rated dissipation,
P
70
MBB/SMA 0207
MBE/SMA 0414
Applied maximum film temperature,
F max.
MBA/SMA 0204
1000 h
8000 h
225 000 h
MBB/SMA 0207
Max. resistance change at rated
dissipation |R/R max.|, after:
1000 h
8000 h
225 000 h
MBE/SMA 0414
1000 h
8000 h
225 000 h
Standard
-55 °C / +125 °C / 56 days
0.25 W
0.4 W
0.65 W
125 °C
1
to 475 k
0.25 %
0.5 %
1.5 %
1
to 1 M
0.25 %
0.5 %
1.5 %
1
to 2.4 M
0.2 %
0.4 %
1.2 %
Power
-55 °C / +155 °C / 56 days
0.4 W
0.6 W
1.0 W
155 °C
1
to 475 k
0.5 %
1.0 %
1
to 1 M
0.5 %
1.0 %
1
to 2.4 M
0.4 %
0.8 %
Revision: 12-Feb-16
Document Number: 28766
2
For technical questions, contact:
filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
- Standard Products
TYPE
TCR
TOLERANCE
±5%
± 50 ppm/K
MBA/SMA 0204
±1%
± 25 ppm/K
± 0.5 %
Jumper
-
±5%
± 50 ppm/K
MBB/SMA 0207
±1%
±2%
± 0.5 %
±1%
± 25 ppm/K
± 0.5 %
Jumper
-
±5%
± 50 ppm/K
MBE/SMA 0414
± 25 ppm/K
± 0.5 %
10 to 2.43 M
E24; E192
Notes
• Resistance ranges printed in bold are preferred TCR / tolerance combinations with optimized availability.
(1)
Resistance value to be selected from E24 series for ± 5 %, ± 2 %, from E24/E96 series for ± 1 % tolerance and from E24/E192 for ± 0.5 %
tolerance.
(2)
AEC-Q200 qualification applies to products with TCR = ± 50 ppm/K and tolerance = ± 1 % in the ranges of 10
to 301 k for MBA/SMA
0204, 10
to 7.5 M for MBB/SMA 0207, and 10
to 22 M for MBE/SMA 0414.
±1%
± 0.5 %
±1%
10 to 1 M
< 10 m;
I
max.
= 5 A
0.22 to 0.91
1 to 22 M
10 to 2.43 M
10 to 2.43 M
E24; E192
-
E24
E24; E96
E24; E192
E24; E96
10 to 475 k
< 10 m;
I
max.
= 3 A
0.22 to 0.91
11 M to 22 M
1 to 10 M
0.22 to 0.91
10 to 1 M
10 to 1 M
E24; E192
-
E24
E24; E96
E24
E24; E192
E24; E96
10 to 475 k
E24; E96
±1%
± 0.5 %
RESISTANCE
(1)(2)
0.22 to 0.91
1 to 10 M
10 to 475 k
E-SERIES
E24
E24; E96
E24; E192
Revision: 12-Feb-16
Document Number: 28766
3
For technical questions, contact:
filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
PART NUMBER AND PRODUCT DESCRIPTION
- Standard Products
PART NUMBER: MBB02070C1001FCT00
M
B
B
0
2
0
7
0
C
1
0
0
1
F
C
T
0
0
TYPE/SIZE
MBA0204
=
MBA/SMA 0204
MBB0207
=
MBB/SMA 0207
MBE0414
=
MBE/SMA 0414
VARIANT
0
= neutral
N
= RB radial
5 mm for
MBB/SMA0207
S
= UB radial
2.5 mm for
MBB/SMA0207
I
= L0 welding
joint not
lacquered for
MBB/SMA 0207
B
= KL
lacquered
welding joint for
MBA/SMA 0204
D
= Ni wire for
MBA/SMA 0204
TCR
D
= ± 25 ppm/K
C
= ± 50 ppm/K
Z
= jumper
RESISTANCE
3 digit value
1 digit multiplier
MULTIPLIER
7
= *10
-3
8
= *10
-2
9
= *10
-1
0
= *10
0
1
= *10
1
2
= *10
2
3
= *10
3
4
= *10
4
5
= *10
5
6
= *10
6
0000
= jumper
TOLERANCE
D
= ± 0.5 %
F
=±1%
G
=±2%
J
=±5%
Z
= jumper
PACKAGING
CT
C1
RP
R2
R4
N4
SPECIAL
00
= standard
Special
termination
wires for
MBA/SMA 0204:
FE
= coppered
steel
CA
= tinned CuAg
NS
= tinned Ni
Product Description: MBB/SMA 0207-50 1 % CT 1K0
MBB/SMA 0207
TYPE/SIZE
MBA/SMA 0204
MBB/SMA 0207
MBE/SMA 0414
-
50
TCR
±
25
ppm/K
±
50
ppm/K
1%
TOLERANCE
± 0.5 %
± 1.0 %
± 2.0 %
± 5.0 %
VARIANT
RB
UB
L0
KL
NISN
AG
CT
PACKAGING
CT
C1
RP
R2
R4
N4
1K0
RESISTANCE
1K0
= 1 k
51R1
= 51.1
Notes
• The products can be ordered using either the PRODUCT DESCRIPTION or the PART NUMBER.
• Standard products are not CECC approved.
• Radial version (RB,UB) cannot be qualified according to CECC so these can only be ordered as standard products.
Revision: 12-Feb-16
Document Number: 28766
4
For technical questions, contact:
filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
MBA/SMA 0204, MBB/SMA 0207, MBE/SMA 0414 - Professional
www.vishay.com
Vishay Beyschlag
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
- CECC Approved Products
TYPE
TCR
TOLERANCE
±5%
± 50 ppm/K
MBA/SMA 0204
±1%
± 25 ppm/K
± 0.5 %
Jumper
-
±5%
± 50 ppm/K
MBB/SMA 0207
± 25 ppm/K
± 0.5 %
Jumper
-
±5%
± 50 ppm/K
MBE/SMA 0414
± 25 ppm/K
± 0.5 %
±1%
± 0.5 %
±1%
±1%
± 0.5 %
±1%
±1%
± 0.5 %
RESISTANCE
(1)(2)
0.22
to 0.91
1
to 10 M
10
to 475 k
10
to 475 k
10
to 475 k
< 10 m;
I
max.
= 3 A
0.22
to 0.91
11 M to 22 M
1
to 10 M
10
to 1 M
10
to 1 M
10
to 1 M
< 10 m;
I
max.
= 5 A
0.22
to 0.91
1
to 22 M
10
to 2.43 M
10
to 2.43 M
10
to 2.43 M
E-SERIES
E24
E24; E96
E24; E192
E24; E96
E24; E192
-
E24
E24; E96
E24; E192
E24; E96
E24; E192
-
E24
E24; E96
E24; E192
E24; E96
E24; E192
Notes
• Resistance ranges printed in bold are preferred TCR / tolerance combinations with optimized availability.
(1)
Resistance value to be selected from E24 series for ± 5 %, from E24/E96 series for ± 1 % tolerance and from E24/E192 for ± 0.5 % tolerance.
(2)
AEC-Q200 qualification applies to products with TCR = ± 50 ppm/K and tolerance = ± 1 % in the ranges of 10
to 301 k for MBA/SMA
0204, 10
to 7.5 M for MBB/SMA 0207, and 10
to 22 M for MBE/SMA 0414.
Revision: 12-Feb-16
Document Number: 28766
5
For technical questions, contact:
filmresistorsleaded@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
DSP 与 ARM 处理器
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
