711 Series Single Way
Data Bus Interconnection System
DB-1a
Data Bus Interconnection System designed for data
transmission as defined by MIL-STD-1553B,
STANAG 3838 and DEF STAN 00-18 (Part 2).
This system is also ideal for video transmission systems and
the termination of screened twisted pairs.
BS 9522 F0043 approved and qualified to
PAN 6484/6499. 711 series connectors incorporate
an anti-vibration locking mechanism. The triaxial, all
crimp contact used in the 711 series single way
connectors is common to the multi-way connector
housing allowing up rating of equipment at any time.
Plugs
Plug - 711-5000/C2832-
Plug-711-5011/C2831-/PAN 6484 F
Receptacles
Single Hole Mtg. Receptacle -711-5001/C2834-
Sq. Flange Mtg. Receptacle - 711-5002/C2835-/PAN 6484 B
Single Hole Mtg. Receptacle - 711-5008/C2844-
PANEL PIERCING
AS FOR 5001
NOTE: This connector is only for use with discrete wiring and is not suitable for use with Data Bus cable.
Sq. Flange Mtg. Receptacle - 711-5009/C2838-(M3 Clinch nuts fitted)
PANEL PIERCING AS
FOR-5002
NOTE: This connector is only for use with discrete wiring and is not suitable for use with Data Bus cable.
Sq. Flange Mtg. Receptacle - 711-5010/C2837-/PAN 6484C (M3 Clinch nuts fitted)
PANEL PIERCING AS
FOR - 5002
Sq. Flange Mtg. Receptacle with P.C. Termination Contacts - 711-5015/C2839
(clinch nuts fitted)
PANEL PIERCING
AS FOR-5002
Single Hole Mtg. Receptacle with bulkhead seal - 711-5016/C2833-/PAN 6484A
PANEL PIERCING
AS FOR 5002
Sq. Flange Mtg. Receptacle - 711-5024/C2836-
PANEL PIERCING
AS FOR 5002
Single Hole Mtg. Receptacle with bulkhead seal and P.C. Termination Contacts-711-5038-
PANEL PIERCING
AS FOR 5001
Terminators
Plug Terminator 77Ω±1 - 5013-XX/C2843-/PAN 6484 L
Note: 711 series terminators are only fitted with a main keyway and will suit any keyway orientation.
Sq. Flange Mtg. Receptacle Terminator (3KΩ±5%) - 5017 - XX/C2845-/PAN 6484 M
PANEL PIERCING
AS FOR _5002
Note: 711 series terminators are only fitted with a main keyway and will suit any keyway orientation.
In Line Receptacle Terminator (3KΩ±5%) - 5028 - XX/C2846-/
Note: 711 series terminators are only fitted with a main keyway and will suit any keyway orientation.
XX Refers to the terminator impedance value. This value can
be selected according to the characteristic impedance of
the data bus transmission line or to simulate the RT
internal impedance. Amphenol standard terminators come
fitted with two impedance values.
BUS terminators = 77 ohm STUB terminators = 3K ohm
e.g. Order 711-5017-77, 711-5028-3K etc.
For special requirements contact Amphenol
Technical Support and Product Management team.
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
