To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at
www.onsemi.com.
Please
email any questions regarding the system integration to
Fairchild_questions@onsemi.com.
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
FAN48623
— 2500 mA Synchronous TinyBoost® Regulator with Bypass Mode
January 2016
FAN48623 — 2500 mA, Synchronous TinyBoost®
Regulator with Bypass Mode
Features
Maximum Continuous Load Current: 2500 mA
at V
IN
of 2.5 V Boosting V
OUT
to 3.3 V
Maximum Pulse Load Current of 3.5 A for GSM PAs
(1 Slot) and PMIC support simultaneously, V
IN
=3.1 V,
V
OUT
=3.4 V
Up to 97% Efficient
4 External Components: 2520 case 0.47 µH Inductor
and 0603 Case Size Input and Output Capacitors
Input Voltage Range: 2.5 V to 5.5 V
Fixed Output Voltage Options: 3.0 V to 5.0 V
True Bypass Operation when V
IN
> Target V
OUT
Integrated Synchronous Rectifier
True Load Disconnect
Forced Bypass Mode
V
SEL
Control to Optimize Target V
OUT
Short-Circuit Protection (SCP)
Low Operating Quiescent Current
16-Bump, 1.81 mm x 1.81 mm, 0.4 mm Pitch, WLCSP
Battery
+
L1
Description
The FAN48623 allows systems to take advantage of new
battery chemistries that can supply significant energy when
the battery voltage is lower than the required voltage for
system power ICs. By combining built-in power transistors,
synchronous rectification, and low supply current, this IC
provides a compact solution for systems using advanced Li-
Ion battery chemistries.
The FAN48623 is a boost regulator designed to provide a
minimum output voltage from a single-cell Li-Ion battery,
even when the battery voltage is below system minimum.
The output voltage regulation is guaranteed up to a
maximum load current of 2500 mA. The regulator transitions
smoothly between Bypass and normal Boost Mode. The
device can be forced into Bypass Mode to reduce quiescent
current.
The FAN48623 is available in a 16-bump, 0.4 mm pitch,
Wafer-Level Chip-Scale Package (WLCSP).
VIN
C
IN
10µF
VOUT
C
OUT
2x22µF
SYSTEM
LOAD
Applications
Boost for Low-Voltage Li-ion Batteries, Brownout
Prevention, System PMIC LDOs Supplies, and
2G/3G/4G RF PA Supplies
0.47µH
SW
VSEL
EN
BYP
FAN48623
PGND
AGND
PG
Smart Phones, Tablets, Portable Devices
Figure 1.
Typical Application
Ordering Information
Part Number
FAN48623UC315X
FAN48623UC32JX
FAN48623UC33X
FAN48623UC35X
FAN48623UC36FX
FAN48623UC50X
FAN48623UC50GX
Output
(1)
Voltage
V
SEL0
/ V
SEL1
3.150 / 3.330
3.20 / 3.413
3.300 / 3.489
3.5 / 3.7
3.64/ 3.709
5.000 / 5.286
5.000 / 5.190
Operating
Temperature
Package
Packing
Device
Marking
JK
JD
JE
-40°C to 85°C
16-Ball, 4x4 Array, 0.4 mm Pitch, 250 µm Ball,
Wafer-Level Chip-Scale Package (WLCSP)
Tape &
Reel
JF
JG
JL
JM
Note:
1. Other output voltages are available on request. Please contact a Fairchild Semiconductor representative.
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
