PX1011B
PCI Express stand-alone X1 PHY
Rev. 6 — 27 June 2011
Product data sheet
1. General description
The PX1011B is a high-performance, low-power, single-lane PCI Express electrical
PHYsical layer (PHY) that handles the low level PCI Express protocol and signaling. The
PX1011B PCI Express PHY is compliant to the
PCI Express Base Specification,
Rev. 1.0a,
and
Rev. 1.1.
The PX1011B includes features such as Clock and Data
Recovery (CDR), data serialization and de-serialization, 8b/10b encoding, analog buffers,
elastic buffer and receiver detection, and provides superior performance to the Media
Access Control (MAC) layer devices.
The PX1011B is a 2.5 Gbit/s PCI Express PHY with 8-bit data PXPIPE interface. Its
PXPIPE interface is a superset of the PHY Interface for the PCI Express (PIPE)
specification, enhanced and adapted for off-chip applications with the introduction of a
source synchronous clock for transmit and receive data. The 8-bit data interface operates
at 250 MHz with SSTL_2 signaling. The SSTL_2 signaling is compatible with the I/O
interfaces available in FPGA products.
The PX1011B PCI Express PHY supports advanced power management functions.
The PX1011BI is for the industrial temperature range (40
C
to +85
C).
Automotive AEC-Q100 compliant version PX1011B-EL1/Q900 is available.
2. Features and benefits
2.1 PCI Express interface
Compliant to
PCI Express Base Specification 1.1
Single PCI Express 2.5 Gbit/s lane
Data and clock recovery from serial stream
Serializer and De-serializer (SerDes)
Receiver detection
8b/10b coding and decoding, elastic buffer and word alignment
Supports loopback
Supports direct disparity control for use in transmitting compliance pattern
Supports lane polarity inversion
Low jitter and Bit Error Rate (BER)
2.2 PHY/MAC interface
Based on Intel PHY Interface for PCI Express architecture v1.0 (PIPE)
Adapted for off-chip with additional synchronous clock signals (PXPIPE)
8-bit parallel data interface for transmit and receive at 250 MHz
2.5 V SSTL_2 class I signaling
NXP Semiconductors
PX1011B
PCI Express stand-alone X1 PHY
2.3 JTAG interface
JTAG (IEEE 1149.1) boundary scan interface
Built-In Self Test (BIST) controller tests SerDes and I/O blocks at speed
3.3 V CMOS signaling
2.4 Power management
Dissipates < 300 mW in L0 normal mode
Support power management of L0, L0s and L1
2.5 Clock
100 MHz external reference clock with
300
ppm tolerance
Supports spread spectrum clock to reduce EMI
On-chip reference clock termination
2.6 Miscellaneous
LFBGA81 leaded or lead-free packages
Operating ambient temperature
Commercial: 0
C
to +70
C
Industrial:
40 C
to +85
C
ESD protection voltage for Human Body Model (HBM): 2000 V
3. Quick reference data
Table 1.
V
DDD1
V
DDD2
V
DDD3
V
DD
V
DDA1
V
DDA2
f
clk(ref)
T
amb
Quick reference data
Conditions
for JTAG I/O
for SSTL_2 I/O
for core
for high-speed
serial I/O and PVT
for serializer
for serializer
operating
commercial
industrial
0
40
-
-
+70
+85
C
C
Min
3.0
2.3
1.15
1.15
1.15
3.0
99.97
Typ
3.3
2.5
1.2
1.2
1.2
3.3
100
Max
3.6
2.7
1.3
1.3
1.3
3.6
100.03
Unit
V
V
V
V
V
V
MHz
digital supply voltage 1
digital supply voltage 2
digital supply voltage 3
supply voltage
analog supply voltage 1
analog supply voltage 2
reference clock frequency
ambient temperature
Symbol Parameter
PX1011B
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 6 — 27 June 2011
2 of 32
NXP Semiconductors
PX1011B
PCI Express stand-alone X1 PHY
4. Ordering information
Table 2.
Ordering information
Solder process
Package
Name
PX1011B-EL1/G
PX1011B-EL1/N
PX1011BI-EL1/G
Description
Version
SOT643-1
SOT643-1
SOT643-1
SOT643-1
Type number
Pb-free (SnAgCu
LFBGA81 plastic low profile fine-pitch ball grid array
solder ball compound)
package; 81 balls; body 9
9
1.05 mm
SnPb solder ball
compound
LFBGA81 plastic low profile fine-pitch ball grid array
package; 81 balls; body 9
9
1.05 mm
Pb-free (SnAgCu
LFBGA81 plastic low profile fine-pitch ball grid array
solder ball compound)
package; 81 balls; body 9
9
1.05 mm
LFBGA81 plastic low profile fine-pitch ball grid array
PX1011B-EL1/Q900
[1]
Pb-free (SnAgCu
solder ball compound)
package; 81 balls; body 9
9
1.05 mm
[1]
PX1011B-EL1/Q900 is AEC-Q100 compliant. Contact
i2c.support@nxp.com
for PPAP.
5. Marking
Table 3.
Line
A
B
C
Leaded package marking
Marking
PX1011B-EL1/N
xxxxxxx
2PNyyww
Description
full basic type number
diffusion lot number
manufacturing code:
2 = diffusion site
P = assembly site
N = leaded
yy = year code
ww = week code
Table 4.
Line
A
Lead-free package marking
Marking
PX1011B-EL1/G
PX1011BI-EL1/G
[1]
PX1011B-EL1/Q
[1]
B
C
xxxxxxx
2PGyyww
diffusion lot number
manufacturing code:
2 = diffusion site
P = assembly site
G = lead-free
yy = year code
ww = week code
[1]
Industrial temperature range.
Description
full basic type number
PX1011B
All information provided in this document is subject to legal disclaimers.
© NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 6 — 27 June 2011
3 of 32
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
