RCM2100 RabbitCore
TM
Microprocessor Core Module
Models RCM2100, RCM2110, RCM2120, RCM2130
The RCM2100 is a full-featured RabbitCore microprocessor core module, available in four different models—two with integrated
Ethernet and two without. The RCM2100 features up to 512K of Flash memory and 512K of SRAM, as well as buffered external
memory-addressing capability. The 34 parallel user I/O (40 for non-Ethernet) shared with 4 serial ports make local control and
communication a breeze.
Features
•
•
•
•
•
With or without Ethernet
3.5" x 2.0" x 0.86"
Up to 512K SRAM
Up to 512K Flash
34 or 40 general-purpose I/O
Designing with RabbitCores
The RabbitCore family of microprocessor core
modules is designed to facilitate rapid development and implementation of embedded systems. RabbitCores are powered by high-
performance 8-bit Rabbit microprocessors with extensive integrated features and a C-friendly instruction set designed for use with the
Dynamic C
®
development system. The RabbitCore mounts on a user-designed motherboard and acts as the controlling microprocessor
for the user's system. Small in size but packed with powerful features, these core modules give designers a complete package for
control and communication.
The integrated Ethernet port frees designers from the limitations of serial-port communications and control and also permits instant
local or worldwide connectivity using low-cost networking hardware. Embedded systems using the Ethernet RabbitCore module can be
controlled and monitored (as well as programmed and debugged when using appropriate accessory hardware) across any network or
the Internet.
Programming the RCM2100
Programs are developed using Z·World's industry-proven Dynamic C software development system. An extensive library of drivers and
sample programs is provided.
1/11/2005
RCM2100 RabbitCore Specifications
Features
Microprocessor
Ethernet Port
Flash
SRAM
Backup Battery
10Base-T, RJ-45, 2 LEDs
512K
512K
256K
128K
512K
512K
RCM2100
RCM2110
RCM2120
None
RCM2130
Rabbit 2000T at 22.1 MHz
256K
128K
Connection for user-supplied battery (to support RTC and SRAM)
34 parallel I/O include
•
20 configurable I/O
•
8 fixed inputs
•
6 fixed outputs
(grouped in five 8-bit ports and shared with serial
ports)
40 parallel I/O include
•
26 configurable I/O
•
8 fixed inputs
•
6 fixed outputs
(grouped in five 8-bit ports and shared with serial
ports)
General Purpose I/O
Additional Inputs
Additional Outputs
Memory I/O
Serial Ports
Serial Rate
Connectors
Slave Interface
Real-Time Clock
Timers
Watchdog/Supervisor
Power
Operating Temp.
Humidity
Board Size
Pricing
(qty. 1/100/1000)
Part Number
Development Kit
Part Number
3.5” x 2.0” x 0.86”
(89 x 51 x 22 mm)
$89 / 69 / 61
101-0434
$279
U.S. 101-0451
-40° to +70°C
2 Startup Mode, Reset In
Status, Clock, Watchdog Out, Reset Out
13 buffered address, 8 buffered data, plus I/O Read-Write and Buffer Enable
Four 5 V CMOS-compatible, 2 configurable as clocked ports
Max. burst rate = CLK/32
Max. sustained rate = burst/2
Two 2 x 20, 2 mm IDC headers
Slave port permits use as master or as intelligent peripheral with Rabbit-based or other master controller
Yes
Five 8-bit timers (four cascadable from the first) and one 10-bit timer with 2 match registers
Yes
4.75-5.25 V DC, 140 mA
-40° to +85°C
5-95%, non-condensing
3.5” x 2.0” x 0.5”
(89 x 51 x 13 mm)
$59 / 49 42
101-0435
$69 / 55 / 48
101-0436
$279
Int’l 101-0452
$49 / 39 / 34
101-0446
1/11/2005
聊聊、笑笑、闹闹
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
