AR0330
3.5-Megapixel
1/3-inch Digital Image Sensor
Image Stabilization Support
1080p/60 Digital Video with
Image Stabilization Support
Applications
1
Captures 2304 x 1296 at 60 fps
Maximum Full HD (1080p60) video performance at Full FOV
2
New 4th generation 2.2
mm
pixel
Superior low-light performance
•
•
•
•
DVC
Web Cam
Video Conferencing
Telepresence
3
3.4M (3:2) and 3.15M (4:3) still images at 30 fps
Burst still image capability to capture fast-moving action
with minimal ERS artifacts
How to Buy
Production and sample quantities of Aptina
products may be ordered through qualified
distributors. See our Web site for details. You may also request access
to NDA data sheets and other technical documentation by visiting
our Web site.
4
WVGA video at 240 fps
Slow motion playback at full FOV
5
Data interfaces: four-lane serial high-speed pixel
interface (HiSPi™) differential signaling (SLVS),
four-lane serial MIPI interface
Multiple high-speed serial interface options allow for flexible
system designs
AR0330
Features
• 2.2μm pixel with Aptina™ A-Pix technology
• Full HD support at 60 fps (2304H x 1296V) for maximum
video performance
• Superior low-light performance , with electronic image
stabilization support
• 3.4MP (3:2) and 3.15MP (4:3)still images
• Slow-motion video (WVGA 240 fps)
• Slave mode for precise frame-rate control , and sensor
synchronization for 3D applications
• Data interfaces: four-lane serial high-speed pixel interface
(HiSPi™) differential signaling (SLVS), four-lane serial MIPI®
interface, or parallel
• On-chip phase-locked loop (PLL) oscillator
• Integrated position-based color and lens shading
correction
• Simple two-wire serial interface
• Auto black level calibration
• 12-to-10 bit output A-Law compression
• Support for external mechanical shutter
• Support for external LED or Xenon flash
Specifications
Imaging Array
• Optical Format: 1/3-inch (5.8mm)
• Chief Ray Angle: 0 ˚, 21 ˚, 25 ˚
• Active Array: 2304H x 1536V
Speed/Output
• Imaging Area: 2304H x 1536V (5.07mm x 3.38mm)
• Frame Rate: 60fps (2304H x 1296V)
• Data Rate: 196 Mp/sec
• Master Clock: 6-64 MHz input clock
• Data Format: 12-bit, 10-bit RAW
Sensitivity
• Pixel Size: 2.2μm x 2.2μm
• Dynamic Range: 72.4dB
• Responsivity: 1.9 V/lux-sec (550nm)
Power
• Supply: 2.8V/1.8V
Temperature Range
• Operating: –30°C to +70°C
Package:
11.4 mm x 11.4mm CLCC, 6.28 mm x 6.65 mm CSP,
or bare die
Block Diagram
Ext
Clock
Analog Core
PLL
Row Drivers
Timing
and
Control
Registers
Digital Core
Row Noise Correction
Black Level Correction
Column
Amplifiers
ADC
12-bit
Test Pattern
Generator
12-bit
Output Data-Path
Compression (optional)
Lens Shading Correction
Digital Gain
Data Pedestal
12-bit
12-bit
8, 10, or
12-bit
10 or 12-bit
Pixel Array
I
2
C
Parallel I/O:
PIXCLK, FV,
LV, D
OUT
[11:0]
Max 98 Mp/s
MIPI I/O:
CLK P/N,
DATA [1:4] P/N
Max 196 Mp/s
over 4 lanes
HiSPi I/O:
SLVS C P/N,
SLVS [3:0] P/N
Max 196 Mp/s
over 4 lanes
(588 Mbps/lane)
(588 Mbps/lane)
aptina.com
Note: This document contains advance information and is subject to change without notice.
Products are warranted only to meet Aptina’s production data sheet specifications. Products and
specifications are subject to change without notice. Aptina, the Aptina logo, DigitalClarity, and
HiSPi are trademarks of Aptina Imaging Corporation. All other trademarks are the property of
their respective owners. © 2011 Aptina Imaging Corporation. All rights reserved.1/3/11 EN.L
工业自动化与控制
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
