Si3016
3.3 V E
NHANCED
G
LOBAL
D
IRECT
A
CCESS
A
RRANGEMENT
Features
Complete DAA includes the following:
Line voltage monitor
Loop current monitor
3.2 dBm transmit/receive levels
Parallel handset detection
7 µA on-hook line monitor
current
Overload protection
Programmable line interface
AC termination
DC termination
Ring detect threshold
Ringer impedance
84 dB dynamic range TX/RX
Integrated analog front end (AFE)
and 2- to 4-wire hybrid
Integrated ring detector
Caller ID support
Pulse dialing support
Billing tone detection
3.3 V or 5 V power supply
Direct interface to DSPs
Up to 5000 V isolation
Proprietary isolation technology
Ordering Information
See page 46.
Pin Assignments
Si3016
QE2
DCT
IGND
C1B
RNG1
RNG2
QB
QE
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
FILT2
FILT
RX
REXT
REXT2
REF
VREG2
VREG
Polarity reversal detection
Applications
V.90 modems
Voice mail systems
Set-top boxes
Fax machines
Internet appliances
VOIP systems
Description
The Si3016 is an integrated direct access arrangement (DAA) line-side
device with a programmable line interface to meet global telephone line
interface requirements. Available in a 16-pin small outline package, it
eliminates the need for an analog front end (AFE), an isolation
transformer, relays, opto-isolators, and a 2- to 4-wire hybrid. The Si3016
dramatically reduces the number of discrete components and cost
required to achieve compliance with global regulatory requirements. The
Si3016 interfaces directly to a Silicon Laboratories integrated DAA
system-side interface.
U.S. Patent #5,870,046
U.S. Patent #6,061,009
Other Patents Pending
Functional Block Diagram
Si3016
RX
FILT
FILT2
REF
DCT
VREG
VREG 2
REXT
REXT2
RNG 1
Ring Detect
RNG 2
QB
Off-Hook
QE
QE2
Silicon Laboratories
Integrated DAA
Interface
Hybrid
and DC
Termination
Isolation
Interface
Rev. 1.0 8/06
Copyright © 2006 by Silicon Laboratories
Si3016
This information applies to a product under development. Its characteristics and specifications are subject to change without notice.
Si3016
T
A B L E
Section
OF
C
O N T E N TS
Page
1. Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
2. Bill of Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3. Analog Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
4. Functional Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.1. Initialization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
4.2. Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.3. Isolation Barrier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.4. Transmit/Receive Full Scale Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
4.5. Parallel Handset Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4.6. Line Voltage/Loop Current Sensing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
4.7. Off-Hook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4.8. DC Termination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4.9. DC Termination Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
4.10. AC Termination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4.11. Ring Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4.12. Ringer Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
4.13. DTMF Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4.14. Pulse Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
4.15. Billing Tone Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
4.16. Billing Tone Filter (Optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
4.17. On-Hook Line Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
4.18. Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
4.19. Overload Protection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
4.20. Analog Output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
4.21. Gain Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
4.22. Clocking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
4.23. Power Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
4.24. Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
4.25. In-Circuit Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
4.26. Exception Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
4.27. Revision Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
5. Control Registers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26
Appendix A—UL1950 3rd Edition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Appendix B—CISPR22 Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
6. Pin Descriptions: Si3016 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
7. Ordering Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
8. Package Outline: SOIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Document Change List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48
Contact Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Rev. 1.0
3
Si3016
1. Electrical Specifications
All Si3016 electrical specifications are based on the assumption that all specifications listed in the data sheet of the
host processor with the integrated system-side DAA module are met.
Table 1. Recommended Operating Conditions
Parameter
1
Ambient Temperature
Ambient Temperature
Symbol
T
A
T
A
Test Condition
K-Grade
B-Grade
Min
2
0
–40
Typ
25
25
Max
2
70
85
Unit
°C
°C
Notes:
1.
The Si3016 specifications are guaranteed when the typical application circuit (including component tolerance) and any
system-side module and any Si3016 are used. See Figure 6, “Si3016 Typical Application Circuit,” on page 9.
2.
All minimum and maximum specifications are guaranteed and apply across the recommended operating conditions.
Typical values apply at nominal supply voltages and an operating temperature of 25 °C unless otherwise stated.
4
Rev. 1.0
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
