3
Double Coated Urethane Foam Tapes
4004
•
4008
•
4016
•
4026
4032
•
4052
•
4056
•
4085
Technical Data
April, 2009
Product Description
3M™ Double Coated Urethane Foam Tapes are conformable foams that offer high
shear strength and are available with either a high temperature holding acrylic
adhesive system or a rubber adhesive system for bonding to various types of surfaces
for mounting, joining and holding.
Products
Note: The user is responsible for determining whether the tape is fit for a particular
purpose and suitable for user’s method of application.
3M™ Double Coated Urethane Foam Tape 4004
3M™ Double Coated Urethane Foam Tape 4008
3M™ Double Coated Urethane Foam Tape 4016
3M™ Double Coated Urethane Foam Tape 4026
3M™ Double Coated Urethane Foam Tape 4032
3M™ Double Coated Black Urethane Foam Tape 4052
3M™ Double Coated Black Urethane Foam Tape 4056
3M™ Double Coated Urethane Foam Tape 4085
1/4 in.
1/8 in.
1/16 in.
1/16 in.
1/32 in.
1/32 in.
1/16 in.
0.045 in.
(6.4 mm) thick
(3.2 mm) thick
(1.6 mm) thick
(1.6 mm) thick
(0.8 mm) thick
(0.8 mm) thick
(1.6 mm) thick
(1.1 mm) thick
3M
™
Double Coated Urethane Foam Tapes
4004 • 4008 • 4016 • 4026 • 4032 • 4052 • 4056 • 4085
Typical Physical Properties
Note: The following technical information and data should be considered representative
or typical only and should not be used for specification purposes.
3M™ Double Coated Urethane Foam Tape
4008
4016
100
100
Units
4004
100
4026
100
Adhesive Type:*
Adhesive Carrier:
Thickness: Nominal
Thickness: Tolerance:
Color:
Release Liner:
Liner Color:
Approximate Density:
(Foam Only)
lb/ft
3
(kg/m
3
)
yard (meter)
yard (meter)
inch (mm)
inch (mm)
psi (kPa)
inch (mm)
inch (mm)
inch
(mm)
Polyurethane Foam Polyurethane Foam Polyurethane Foam Polyurethane Foam
0.250 (6.4)
0.215-0.285
(5.46-7.24)
Natural
0.003 (0.08)
Green Plaid
12
(190)
18 (16.5)
25 (23)
46 (1168)
± 1/32 (± 0.8)
12 (85)
0.125 (3.2)
0.110-0.150
(2.79-3.81)
Natural
0.003 (0.08)
Green Plaid
15
(240)
36 (32.9)
50 (45.7)
46 (1168)
± 1/32 (± 0.8)
25 (170)
0.0625 (1.6)
0.045-0.080
(1.142-2.03)
Natural
0.003 (0.08)
Green Plaid
11
(175)
36 (32.9)
100 (91)
46 (1168)
± 1/32 (± 0.8)
50 (345)
0.0625 (1.6)
0.045-0.080
(1.142-2.03)
Natural
0.003 (0.08)
Green Plaid
18
(290)
36 (32.9)
100 (91)
46 (1168)
± 1/32 (± 0.8)
40 (275)
Standard Length:
Maximum Length:
Available Width:
Normal Slitting Tolerance:
Normal Tensile:
(“T” Block)
1 in
2
(6.45 cm
2
)
Jaw Speed 2 in/min
(50 mm/min)
Static Shear:
Measured at various
temperatures and
gram loadings.
(1/2 sq. in. overlap).
Will hold listed
weight for 100 hours.
72°F (22°C)
120°F (49°C)
150°F (66°C)
200°F (93°C)
gms
1000
500
500
250
90 (620)
90
380 (193)
220 (104)
1000
500
500
250
160 (1100)
90
380 (193)
220 (104)
1500
1000
750
750
140 (965)
100
380 (193)
220 (104)
2000
1000
1000
750
180 (1240)
100
380 (193)
220 (104)
Tensile Strength:
Elongation:
Temperature Resistance:
Short Term (Minutes, Hours)
Long Term (Days, Weeks)
psi (kPa)
%
°F (°C)
°F (°C)
Solvent Resistance:
UV Resistance:
Cold Flex at -20°F (-30°C):
Thermal Conductivity:
Dielectric Strength:
BTU/hr/°F/ft
2
/ft
(watt/metre Kelvin)
volts/mil
(volts/0.025 mm)
No apparent degradation when exposed to splash
tests of most hydrocarbon solvents.
No apparent degradation when exposed to 7 days in U.V. chamber.
No cracking when flexed around a 1/4 in. (6.4 mm mandrel).
0.036
(0.062)
200-300
(200-300)
0.036
(0.062)
200-300
(200-300)
0.036
(0.062)
200-300
(200-300)
0.036
(0.062)
200-300
(200-300)
*3M™ Adhesive 100 is a firm acrylic pressure sensitive adhesive system. It features high ultimate bond strength, very good high temperature
and solvent resistance and very high shear holding power. Bond strength increases substantially with natural aging.
-2-
3M
™
Double Coated Urethane Foam Tapes
4004 • 4008 • 4016 • 4026 • 4032 • 4052 • 4056 • 4085
Typical Physical Properties
Note: The following technical information and data should be considered representative
or typical only and should not be used for specification purposes.
3M™ Double Coated Urethane Foam Tape
4052
4056
100
100
Units
4032
100
4085
740
Adhesive Type:*
Adhesive Carrier:
Thickness: Nominal
Thickness: Tolerance:
Color:
Release Liner:
Liner Color:
Approximate Density:
(Foam Only)
lb/ft
3
(kg/m
3
)
yard (meter)
yard (meter)
inch (mm)
inch (mm)
psi (kPa)
inch (mm)
inch (mm)
inch
(mm)
Polyurethane Foam Polyurethane Foam Polyurethane Foam Polyurethane Foam
0.031 (0.8)
0.025-0.040
(0.64-1.02)
Natural
0.003 (0.08)
Green Plaid
20
(320)
72 (65.8)
175 (160)
46 (1168)
± 1/32 (± 0.8)
60 (414)
0.031 (0.8)
0.025-0.040
(0.64-1.02)
Black
0.003 (0.08)
Green Plaid
14
(225)
72 (65.8)
175 (160)
46 (1168)
± 1/32 (± 0.8)
75 (515)
0.0625 (1.6)
0.045-0.080
(1.142-2.03)
Black
0.003 (0.08)
Green Plaid
11
(175)
36 (32.9)
100 (91)
46 (1168)
± 1/32 (± 0.8)
50 (345)
0.045 (1.2)
0.039-0.054
(1.00-1.45)
Natural
0.003 (0.08)
Tan
22
(352)
72 (65.8)
100 (91)
46 (1168)
± 1/32 (± 0.8)
45 (310)
Standard Length:
Maximum Length:
Available Width:
Normal Slitting Tolerance:
Normal Tensile:
(“T” Block)
1 in
2
(6.45 cm
2
)
Jaw Speed 2 in/min
(50 mm/min)
Static Shear:
Measured at various
temperatures and
gram loadings.
(1/2 sq. in. overlap).
Will hold listed
weight for 100 hours.
72°F (22°C)
120°F (49°C)
150°F (66°C)
200°F (93°C)
gms
2000
1500
1000
1050
240 (1655)
90
380 (193)
220 (104)
1500
750
750
750
225 (1550)
110
380 (193)
220 (104)
1500
1000
750
750
140 (965)
100
380 (193)
220 (104)
1000
250
—
—
140 (965)
100
200 (93)
125 (152)
Tensile Strength:
Elongation:
Temperature Resistance:
Short Term (Minutes, Hours)
Long Term (Days, Weeks)
psi (kPa)
%
°F (°C)
°F (°C)
Solvent Resistance:
UV Resistance:
Cold Flex at -20°F (-30°C):
Thermal Conductivity:
Dielectric Strength:
BTU/hr/°F/ft
2
/ft
(watt/metre Kelvin)
volts/mil
(volts/0.025 mm)
No apparent degradation when exposed to splash
tests of most hydrocarbon solvents.
No apparent degradation when exposed to 7 days in U.V. chamber.
No cracking when flexed around a 1/4 in. (6.4 mm mandrel).
0.036
(0.062)
200-300
(200-300)
0.036
(0.062)
200-300
(200-300)
0.036
(0.062)
200-300
(200-300)
0.036
(0.062)
200-300
(200-300)
*3M™ Adhesive 100 is a firm acrylic pressure sensitive adhesive system. It features high ultimate bond strength, very good high temperature
and solvent resistance and very high shear holding power. Bond strength increases substantially with natural aging.
3M™ Adhesive 740 is a medium-firm rubber-resin pressure sensitive adhesive system. It features good holding power and adhesion to a
wide variety of surfaces including many low surface energy plastics such as polyethylene and polypropylene.
-3-
3M
™
Double Coated Urethane Foam Tapes
4004 • 4008 • 4016 • 4026 • 4032 • 4052 • 4056 • 4085
Features
• The natural colored urethane foam tape products vary in color from white to light
yellow. The color will change to light yellow upon exposure to sunlight (ultraviolet
radiation). This color change is normal and does not affect tape performance.
• 3M™ Double Coated Urethane Foam Tape 4026 is available in roll form and die-
cut pieces. Die-cut pieces of 3M tape 4026 is available in 3/4" or 1" squares, either
individual pieces double linered with an extended liner on one side or in pads of 48
squares.
•
3M™ Double Coated Urethane Foam Tape 4085 combines conformability with
high immediate adhesion to most plastics including ABS, polycarbonate, acrylic,
polyethylene and polypropylene as well as metal and paint. 3M tape 4085 tears
easily which makes it ideal for hand application.
Application Techniques
• Bond strength is dependent upon the amount of adhesive-to-surface contact
developed. Firm application pressure helps develop better adhesive contact and
improve bond strength.
• To obtain optimum adhesion, the bonding surfaces must be clean, dry and well
unified. Typical surface cleaning solvents are isopropyl alcohol* and water (rubbing
alcohol) or heptane.
• Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C). Initial
tape application to surfaces at temperatures below 50°F (10°C) is not recommended
because the adhesive becomes too firm to adhere readily. However, once properly
applied, low temperature holding is generally satisfactory.
*Note:
Be sure to follow the manufacturer’s precautions and directions for use when
using solvents.
Application Ideas
The urethane foam tapes are generally ideal for interior applications or for exterior
applications where the tape will be protected from the environment. The urethane
foam is open cell.
3M™ Double Coated Urethane Foam Tape 4004
3M™ Double Coated Urethane Foam Tape 4008
3M™ Double Coated Urethane Foam Tape 4016
3M™ Double Coated Urethane Foam Tape 4026
3M™ Double Coated Urethane Foam Tape 4032
3M™ Double Coated Urethane Foam Tape 4052
Mount interior signs and nameplates
Bond acoustic panels to walls
Mount interior signs and nameplates
Mount air fresheners and soap dispensers
Attach wire clips to various surfaces
Bond window to microwave oven doors
Mount electrical channel to wall surfaces
3M™ Double Coated Urethane Foam Tape 4056 – Mount wall corner protectors
3M™ Double Coated Urethane Foam Tape 4085 – Attach wire clips
Attach air fresheners
–
–
–
–
–
–
-4-
3M
™
Double Coated Urethane Foam Tapes
4004 • 4008 • 4016 • 4026 • 4032 • 4052 • 4056 • 4085
Storage
Store in original cartons at 70°F (21°C) and 50% relative humidity.
Shelf Life
To obtain best performance, use these products within 24 months from date of
manufacture except 3M™ Double Coated Urethane Foam Tape 4085 which is
18 months from date of manufacture.
Certification/
Recognition
MSDS:
3M has not prepared MSDSs for these products which are not subject to the MSDS requirements
of the Occupational Safety and Health Administration’s Hazard Communication Standard, 29 C.F.R.
1910.1200(b)(6)(v). When used under reasonable conditions or in accordance with the 3M directions
for use, these products should not present a health and safety hazard. However, use or processing of the
products in a manner not in accordance with the directions for use may affect their performance and
present potential health and safety hazards.
TSCA:
These products are defined as articles under the Toxic Substances Control Act and therefore, are
exempt from inventory listing requirements.
Technical Information
The technical information, recommendations and other statements contained in this document are
based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such
information is not guaranteed.
Product Use
Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use
and performance of a 3M product in a particular application. Given the variety of factors that can affect
the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and
determining whether it is fit for a particular purpose and suitable for user’s method of application.
Warranty,
Limited Remedy,
and Disclaimer
Unless an additional warranty is specifically stated on the applicable 3M product packaging or product
literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time
3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY
OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE.
If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s
option, replacement of the 3M product or refund of the purchase price.
Limitation of Liability
Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product,
whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted,
including warranty, contract, negligence or strict liability.
ISO 9001: 2000
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001: 2000 standards.
3
Industrial Adhesives and Tapes Division
3M Center, Building 225-3S-06
St. Paul, MN 55144-1000
800-362-3550 • 877-369-2923 (Fax)
www.3M.com/industrial
Recycled Paper
40% pre-consumer
10% post-consumer
3M is a trademark of 3M Company.
Printed in U.S.A.
©3M 2009 70-0705-7561-1 (4/09)
-5-
FPGA/CPLD
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
