8D - D38999 Composite Series
Connector part numbers
Basic Series
Shell style:
0:
Square flange receptacle
1:
In line receptacle
5:
Plug with RFI shielding.
Type:
-:
Connectors with standard crimp contacts.
L:
Receptacle with long spill (male and female size #22D, #20).
C:
Receptacle with short spill (male and female #22D, #20, #16).
S:
Receptacle with specific spill (male et female #22D)
W:
Receptacle with male contacts #22D for wire wrap (3 wraps)
T:
Receptacle with male contacts #20 for wire wrap (2 wraps)
Shell size:
09 - 11 - 13 - 15 - 17 - 19 - 21 - 23 - 25
Plating:
J:
Olive drab cadmium
M:
Nickel
X:
Without plating
Contact layout:
See page 8 to 11
Contact type:
P; H:
Pin
A:
Connector supplied less pin contact or with specific contacts (Connector marking: A+ orientation)
S; J:
Socket
B:
Connector supplied less socket contact or with specific contacts (Connector marking: B+ orientation)
P & S: 500 mating - unmating
J & H: 1500 mating - unmating
Orientation:
N, A, B, C, D & E (see page 58)
Spécification: 046:
Tinned straight spills
251:
Connector provided with power contacts (layouts with contacts #8)
L:
For P or S contact only, connectors delivered without contacts, connectors marking P or S plus orientation.
8D
0
-
11
J
35
P
N
**
MIL-DTL 38999 part numbers*
Basic Series
Shell style:
20:
Square flange receptacle
26:
Plug with RFI shielding.
Plating:
J:
Olive drab cadmium
M:
Nickel
Shell size:
A - B - C - D - E - F - G - H - J
Contact layout:
See page 11 for layout according to MIL-DTL-38999
Contact type:
P, H:
Pin.
A:
Connector supplied less pin contact or with specific contacts (connector marking: A + orientation).
S, J:
Socket.
B:Connector
supplied less socket contact or with specific contacts (connector marking: B + orientation).
P & S = 500 mating - unmating
J & H = 1500 mating - unmating
Orientation:
N, A, B, C, D & E (see page 58)
L:
For P or S contact type only, connector delevired without contacts, connector marking P or S (without L)
* Note:
To place an order of MIL connectors delivered without MIL removable crimp contacts and keep P or S plus orientation marking,
it must be specify clearly on the order (by adding a suffix L at the end of the P/N or specified in comment).
D38999 20
M
B
35
P
N
L
26
MicroPython开源版块
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
