REVISION AN
PATENT NUMBER
7172438
-08: 8 ROW
(SEAM-30-02.0-XX-08-1-A-XX-K-TR SHOWN)
(SOME CENTER FEATURES, INCLUDING -K, NOT SHOWN FOR CLARITY)
"A"
REF
"B"
PIN 01
C
L
FIG. 1
***-10,*****-15,****-19 -20,
******-25, -30, -40, -50
No OF POSITIONS
SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR
.123 3.12
REF
C
(PER ROW)
LEAD STYLE
-02.0 (SEE TABLE 1&2)
-03.0(SEE TABLE 1&2)
-03.5(SEE TABLE 1&2)
-06.5 (SEE TABLE 9 &10)
-07.0 (SEE TABLE 9 &10)
-09.0 (SEE TABLE 9 &10)
-11.0 (SEE TABLE 9 &10)
*
-13.0 (SEE TABLE 9 &10)
.0500 1.270 (TYP)
C
"A"
"H"
REF (TYP)
POLYIMIDE PAD
(SEE FIG. 4, SHT 2)
(SEE NOTE 8)
DOT APPLICATOR-KAPTON TAPE.
-04 ROW: USE K-DOT-.138-.250-.005
-05/-06 ROW: USE K-DOT-.236-.343-.005
-08 ROW: USE K-DOT-.325-.450-.005
-10 ROW: USE K-DOT-.404-.500-.005
-GP: GUIDE POST
(SEE FIG. 8, SHT 5)
(ONLY AVAILABLE WITH -02.0 LEAD
STYLE, 4 & 6 ROW, 20, 30, 40, &
50 POSITION)
**-EP: EXTENDED GUIDE POST
(SEE FIG. 10, SHT 5)
(ONLY AVAILABLE WITH -02.0& -03.5
LEAD STYLE, 20, 30, 40, & 50 POSITION)
TAPE & REEL
(SEE NOTES 9, 10 & 11)
OPTION
PLATING SPECIFICATION
"E"
(REF)
'F"
(REF)
C
L
"C"
(REF)
SEAM-XX-XX.X-8
"J" REF
.050 1.27 (TYP)
C
"A"
PIN 08
.035 0.89 REF
-L: LIGHT GOLD IN CONTACT
"G"
AREA, MATTE TIN ON TAIL
REF
-(LEAD STYLE -02.0 THRU-03.5:
USE SUB-T-1M36-XX.X-L-X)
-(LEAD STYLE -06.5 THRU-13.0:
USE SUB-T-1M38-XX.X-L-X)
-SM: SELECTIVE GOLD IN CONTACT
.060 1.52
AREA, MATTE TIN ON TAIL
REF
-(LEAD STYLE -02.0 THRU-03.5:
USE SUB-T-1M36-XX.X-S-X
-(LEAD STYLE -06.5 THRU-13.0:
USE SUB-T-1M38-XX.X-S-X))
-S: SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
-(LEAD STYLE -02.0 THRU-03.5:
USE SUB-T-1M36-XX.X-S-X)
.040 1.02
-(LEAD STYLE -06.5 THRU-13.0:
USE SUB-T-1M38-XX.X-S-X)
REF
ALIGNMENT PIN
(SEE FIG. 3, SHT 2)
(NOT AVAILABLE WITH -19 POSITION)
(SEE NOTE 7)
-1: 63% TIN / 37% LEAD
CHARGE TAIL
(USE SUB-T-1M3X-XX.X-X-1)
-2: 95.5% TIN / 3.8% SILVER /
.7% COPPER CHARGE TAIL
(USE SUB-T-1M3X-XX.X-X-2)
C
L
C
L
C
'B'
C
L
"D" (TYP)
-04: 4 ROWS (SEE FIG 13, SHT 6)
(NOT AVAILABLE IN -13.0 LEAD STYLE)
-05: 5 ROWS (SEE FIG. 7, SHT 4)
-06: 6 ROWS (SEE FIG. 6, SHT 4)
-08: 8 ROWS (SEE FIG. 1)
-10: 10 ROWS
(SEE FIG. 2, SHT 2)
ROW
SOLDER COMPOSITION & STYLE
AN
* = NOT TOOLED
(SEE SHEET 3 FOR LEAD STYLES -06.5 THRU -13.0)
"T"
(SEE NOTE 6)
C
*
= NOT TOOLED
**
= NOT RELEASED FOR PRODUCTION
***
= 10 POSITION ONLY AVAILABLE
IN 4 ROW
****
= ONLY AVAILABLE WITH -03.5 LEAD
STYLE & 6 ROW
*****
= ONLY AVAILABLE IN A 10 ROW
= ONLY AVAILABLE IN 8 & 10 ROW
******
= ONLY AVAILABLE WITH -03.5 LEAD
STYLE & 4 ROW
C
"U"
(SEE SHEET 3 FOR LEAD STYLES -06.5 THRU -13.0)
NOTES:
1.
C
REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PUSHOUT FORCE: 0.75 LBS.
3. NOTE DELETED.
4. 5 ROW SOLDER TAILS ARE NOT SYMMETRICAL WITH BODY WIDTH
(.378[9.60]); SEE FIG. 7, SHEET 4.
5. C18 TO BE INSPECTED OPTICALLY WHILE FOCUSED ON THIS SURFACE.
6. DIMENSION TO BE MEASURED IN ALL FOUR CORNERS.
7. WITHOUT -A AVAILABLE FOR EXISTING CUSTOMERS ONLY AS OF
REVISION AD.
8. POLYIMIDE PAD WILL BE SUPPLIED WHETHER OR NOT -K IS SPECIFIED.
9. TAPE & REEL WILL BE SUPPLIED WHETHER OR NOT -TR IS SPECIFIED.
10. FOR QUANTITIES UP TO 49 PIECES, NO LEADER, TRAILER, OR REEL WILL
BE SUPPLIED. FOR QUANTITIES 50 - 124, NO LEADER OR TRAILER WILL
BE SUPPLIED.
11. ATTACH LABEL "SEAX-0001" TO EACH TAPE & REEL PACKAGE.
12. SEE RECOMMENDED FOOTPRINT DRAWING FOR STENCIL
REQUIREMENTS.
13. SOLDER CHARGE VOLUME IS 0.891 x 10^-5 IN ^3 REF.
AN
DETAIL 'B'
SCALE 7 : 1
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
.004 0.10
(SEE NOTE 6)
PROPRIETARY NOTE
.XX: .01 [.3]
2
.XXX: .005 [.13]
.XXXX: .0020 [.051]
ANGLES
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
DESCRIPTION:
DWG. NO.
MATERIAL:
INSULATOR: LCP, COLOR: BLACK
TERMINAL: COPPER ALLOY
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 PITCH TERMINAL ARRAY ASSEMBLY
SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR
SHEET
1
OF
6
F:\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR-MKT.SLDDRW
BY:
BRATCHER 06/02/2004
REVISION AN
-10: 10 ROW
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SEAM-30-02.0-XX-10-1-A-XX-K-TR SHOWN)
(SOME CENTER FEATURES, INCLUDING -K, NOT SHOWN FOR CLARITY)
PIN 01
C
L
FIG. 2
C
.056
- .004
1.42
- 0.10
(TYP)
+.002
+0.05
C
L
.011 0.28
REF
"H"
REF (TYP)
.028 0.72
REF
"E"
REF
"F"
REF
C
L
"G"
REF
C
SOLDER CHARGE
.016±.003 0.40±0.08
(TYP)
.056±.003 1.42±0.08
C
SUB-T-1M36-XX.X-X-X
.050 1.27 REF
.044 1.12 (TYP)
PIN 10
-A: ALIGNMENT PINS
APPLIES TO ALL -A OPTION PART NUMBERS
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SEAM-30-02.0-XX-08-1-A-XX-K-TR SHOWN)
(SOME CONTACTS NOT SHOWN FOR CLARITY)
.045 1.14
.040 1.02
REF (TYP)
REF
.034 0.86
.044 1.12 REF (TYP)
.044 1.12
"K"
(REF)
FIG. 3
-K: POLYIMIDE PAD
(SEAM-30-02.0-XX-08-1-A-XX-K-TR SHOWN)
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(ALL CONTACTS NOT SHOWN FOR CLARITY)
.050 1.27
REF
C
L
FIG. 4
SECTION "A"-"A"
SCALE 4 : 1
"S" .020[0.51]
C
L
'C'
"T" REF
"M" .020[0.51]
"M"=(("A"(SEE TABLE 3)-"N")/2)+.020
C
L
"N"
"L"
(INCL. POLYIMIDE FILM)
.034 0.86
.044 1.12 REF
DETAIL 'C'
SCALE 4 : 1
.044 1.12 REF
.034 0.86
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
.050 PITCH TERMINAL ARRAY ASSEMBLY
DETAIL 'C'
ALTERNATE CONSTRUCTION
* = NOT TOOLED
SHEET SCALE: 2:1
SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR
SHEET
2
OF
6
F:\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR-MKT.SLDDRW
BY:
BRATCHER 06/02/2004
REVISION AN
-06.5 THRU -13.0 LEAD STYLES
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SEAM-30-09.0-XX-08-X-A-XX-K-TR SHOWN)
(SOME CENTER FEATURES, INCLUDING -K, NOT SHOWN FOR CLARITY)
"A"
(REF)
C
FIG. 5
.0088±.0008 0.224±0.020
.007 0.18
REF
C
'H'
"B"
C
"H"
(REF) (TYP)
.050 1.27
PIN 01
(SEAM-XX-07.0-X-08-A-X SHOWN)
-07.0 LEAD STYLE
DETAIL 'H'
SCALE 16 : 1
"G"
(REF)
C
L
"F"
(REF)
"R"
(REF)
AN
C
L
"C" (REF)
PIN 08
SEAM-30-00.1-XX-X
* = NOT TOOLED
"Q"
(REF)
SEAM-S-30-XX.X-XX-X
C
L
C
L
.050 1.27
C
C
SUB-T-1M38-XX.X-X-X
"D" (TYP)
C
L
SEAM-S-XX-XX.X-08-X
SEAM-XX-00.1-X
'D'
.028 0.72
.053
- .003
1.35
- 0.08
+.002
+0.05
.011 0.28
REF
"P"
C
* = NOT TOOLED
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
SEE NOTE 5
C
C
.056 1.42
C
DETAIL 'D'
SCALE 8 : 1
.055±.002 1.41±0.05
.050 1.27 (REF)
C C
L L
.044 1.12 (TYP)
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 PITCH TERMINAL ARRAY ASSEMBLY
SHEET
3
OF
6
.016±.003 0.41±0.08
TYP
SCALE 3.5:1
F:\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR-MKT.SLDDRW
SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR
BY:
BRATCHER 06/02/2004
REVISION AN
C
L
PIN 01
"E"
REF
"F"
REF
C
L
"H" REF (TYP)
"G" REF
-06: 6 ROWS
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SEAM-20-02.0-XX-06-X-A-XX-K-TR SHOWN)
(SOME CENTER FEATURES, INCLUDING -K, NOT SHOWN FOR CLARITY)
FIG. 6
.030 0.76 REF
SEAM-XX-XX.X-06-X
PIN 06
.040 1.02 REF
C
L
PIN 01
-05: 5 ROWS
(SAME AS FIG. 6, EXCEPT AS SHOWN)
(SEAM-20-02.0-XX-05-X-A-XX-K-TR SHOWN)
(SEE NOTE 4)
FIG. 7
"E"
REF
"F"
REF
C
L
"H" REF (TYP)
"G" REF
.030 0.76 REF
SEAM-XX-XX.X-05-X
PIN 05
.378 9.60 REF
(SEE NOTE 4)
"F"
.040 1.02 REF
"F"
.072 1.83
(SEE NOTE 4)
.128 3.25
(SEE NOTE 4)
SECTION "F"-"F"
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 3:1
.050 PITCH TERMINAL ARRAY ASSEMBLY
SHEET
4
OF
6
SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR
F:\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR-MKT.SLDDRW
BY:
BRATCHER 06/02/2004
REVISION AN
-GP: GUIDE POST OPTION
(ONLY AVAILABLE WITH -02.0 LEAD STYLE, 4 & 6 ROW, 20, 30, 40, & 50 POSITIONS)
(MATES WITH SEAF RIGHT ANGLE ONLY)
(SAME AS FIG. 1, EXCEPT AS SHOWN)
(SEAM-20-02.0-XX-06-2-A-GP-K-TR SHOWN)
(SOME CONTACTS NOT SHOWN FOR CLARITY)
"V" REF
FIG. 8
-EP: EXTENDED GUIDE POST OPTION
(ONLY AVAILABLE WITH -02.0 & -03.5 LEAD STYLES, 4 & 6 ROW,
20, 30, 40, & 50 POSITIONS)
(SAME AS FIG. 8, EXCEPT AS SHOWN)
(SEAM-20-03.5-XX-06-2-A-EP-K-TR SHOWN)
(SOME CONTACTS NOT SHOWN FOR CLARITY)
WT-58-XX-X
R.060 1.52
REF
C
FIG. 10
.218 5.54
REF
WT-42-01-T
C
2 MAX SWAY
(TYP)
.120 3.05
REF
SEAM-XX-02.0-XX-X-GP
"Y"
"x"
C
.324
.320 8.13 8.22
REF
.498 12.65
REF
.010 0.25
REF
SEAM-XX-03.5-XX-X-EP
C
+.005
"W"
- .008
.070 1.78 REF
.020 0.51 SQ. REF (TYP)
.059 1.49
.285 7.24
REF
.117 2.97 SQ. REF (TYP)
.180 4.57
REF
2.246 57.05
REF
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
e-Mail: info@SAMTEC.com
code: 55322
DESCRIPTION:
DWG. NO.
DO NOT SCALE DRAWING
SHEET SCALE: 2:1
.050 PITCH TERMINAL ARRAY ASSEMBLY
SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR
SHEET
5
OF
6
F:\DWG\MISC\MKTG\SEAM-XX-XX.X-XX-XX-X-A-XX-K-TR-MKT.SLDDRW
BY:
BRATCHER 06/02/2004
stm32/stm8
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
