Notice for TAIYO YUDEN products
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■
Product information in this catalog is as of October 2011. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully be-
fore practical application or usage of the Products.
Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorpo-
rating such products, which are caused under the conditions other than those specified in this catalog or individual
specification.
■
Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is
available.
■
Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■
All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, subma-
rine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliabil-
ity evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■
The contents of this catalog are applicable to the products which are purchased from our sales offices or distribu-
“TAIYO
YUDEN’ official sales channel”
tors (so called
s
).
It is only applicable to the products purchased from any of TAIYO YUDEN’ official sales channel.
s
■
Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may oc-
cur in connection with a third party's intellectual property rights and other related rights arising from your usage of
products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights.
■
Caution for export
Certain items in this catalog may require specific procedures for export according to
“Foreign
Exchange and For-
eign Trade Control Law”of Japan,
“U.S.
Export Administration Regulations” and other applicable regulations.
,
Should you have any question or inquiry on this matter, please contact our sales staff.
1
2
notice_e-01
ARRAY TYPE MULTILAYER CERAMIC CAPACITORS
REFLOW
■
FEATURES
◦
igh density and high efficiency mounting.
H
◦
nternal electrodes are composed of nickel for improved cost perfor-
I
mance and reliability.
■
APPLICATIONS
◦
eneral electronic equipment
G
◦
ommunication equipment (cellular phone, wireless applications,
C
etc.)
■
PART NUMBER
E
❶
4
❷
K
❸
2
1
❹
2
△
B
❺
❻
J
1
0
❼
½Capacitance
tolerance
F
±1pF
K
±10%
M
±20%
4 M D
－
T
△
½
❾Thickness
〔mm〕
P
0.3
K
0.45
V
0.5
B
0.6
A
0.8
D
0.85
❾
❿
⓫
⓬
❸End
❻Temperature
❶Rated
❹Dimension
termination
characteristics
voltage VDC〕
〔
Type
（inch）
L×W
［mm½
code
K
Plated
A
4
096
（0302）
0.9×0.6
B
BJ
J
6.3
110
（0504）
1.37×1.0
X5R
L
10
212
（0805）
2.0×1.25
B7
X7R
E
16
CH
❷Series
name
❺Dimension
tolerance
CH
T
25
C0H
2 circuits
△
Standard
2
U
50
multilayer capacitor
△＝Blank
space
4 circuits
4
multilayer capacitor
❿Special
code
－
Standard
⓬Internal
code
△
Standard
△＝Blank
space
⓫Packaging
φ178mm
Taping
（4mm
pitch）
0504, 0805 Type
φ178mm
Taping
（2mm
pitch
）
0302 Type
❼Nominal
capacitance
〔pF〕
example
104
100,000
105
1,000,000
T
F
■
STANDARD EXTERNAL DIMENSIONS/STANDARD QUANTITY
L
E2
W
T
Dimension [mm]
Type
□2K096
（0302
inch）
□2K110
（0504
inch）
L
0.9±0.05
W
0.6±0.05
E1
0.23±0.10
E2
0.125±0.075
P
0.45±0.05
P
K
V
B
A
D
D
T
0.30±0.03
0.45±0.05
0.50±0.05
0.60±0.06
0.80±0.08
0.85±0.10
0.85±0.10
Standard quantity [pcs]
Embossed
Paper tape
tape
10000
－
－
－
－
E1
P
W
L
E2
T
1.37±0.07
2.00±0.10
2.00±0.10
1.00±0.08
1.25±0.10
1.25±0.10
0.36±0.10
0.50±0.20
0.25±0.10
0.2±0.10
0.25±0.15
0.25±0.15
0.64±0.10
1.00±0.10
0.50±0.10
4000
4000
4000
□2K212
（0805
inch）
□4K212
（0805
inch）
E1
P
■
AVAILABLE CAPACITANCE RANGE
BJ/B7
Type
VDC
[3-digit]
102
222
472
103
223
473
104
224
474
105
225
096 2 circuits
□2K096
B/X5R
X5R
10V 6.3V 4V
110 2 circuits
212 2 circuits
212 4circuits
□2K110
□4K212
□2K212
X7R
B/X5R
X5R
B/X5R X5R X7R
B/X5R
X5R
50V 25V 16V 50V 25V 16V 10V 16V 10V 6.3V 25V 10V 16V 25V 16V 10V 10V
B
B
B
P
K
K
K
K
K
B
B
B
B
B
B
B
B
B
B
B
B
B
A
A
A,V
V
A
D
D
D
D
D
D
D
D
CH
Type
VDC
[3-digit]
100
120
150
180
220
270
330
390
470
560
680
820
101
096
2 circuits
□2K096
CH
25V
P
P
P
P
P
P
P
P
P
P
P
P
P
110
2 circuits
□2K110
CH
50V
B
B
B
B
B
B
B
B
B
B
B
B
B
Cap
[μF]
Cap
[pF]
0.001
0.0022
0.0047
0.01
0.022
0.047
0.1
0.22
0.47
1.0
2.2
※Letters
in the table indicate thickness.
10
12
15
18
22
27
33
39
47
56
68
82
100
※Letters
in the table indicate thickness.
Temp.char.Code
BJ
B7
CH
Applicable standard
JIS
B
EIA
X5R
EIA
X7R
JIS
CH
EIA
C0H
Temperature characteristics
Temperature range
℃〕
Ref. Temp.
〔℃〕
〔
－25½＋85
20
－55½＋85
25
－55½＋125
25
－55½＋125
20
－55½＋125
25
Capacitance change
±10
［％½
±15
［％½
±15
［％½
±60
［ppm/℃½
±60
［ppm/℃½
Capacitance tolerance
〔％〕
±10
（K）
±20
（M）
±10
（K）
＊
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
36
1
2
mlcc08_e-01
■
REPRESENTATIVE PART NUMBERS
●096TYPE 2
circuits type
【Temperature
Characteristic BJ：B/X5R】
・0.45mm
thickness K）
（
Rated
voltage
6.3V
Part number 1
J2K096 BJ473□K
J2K096 BJ104□K
J2K096 BJ224MK
J2K096 BJ474MK
A2K096 BJ105MK
Part number 2
Temp.
char.
X5R
X5R
X5R
X5R
X5R
Capacitance
〔μF〕
0.047
0.1
0.22
0.47
1
Capacitance
tolerance
±10, ±20
±10, ±20
±20
±20
±20
tanδ
〔%〕
5
5
10
10
10
Thickness
〔mm〕
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
Soldering
R:Reflow
W:Wave
R
4V
HALT
% Rated
voltage
150%
150%
150%
150%
150%
HALT
% Rated
voltage
200%
Internal
code
（P/N
1）
Note
・0.3mm
thickness P）
（
Rated
voltage
10V
Part number 1
L2K096 BJ103□P
Part number 2
Temp.
char.
B/X5R
Capacitance
〔μF〕
0.01
Capacitance
tolerance
±10, ±20
tanδ
〔%〕
5
Thickness
〔mm〕
0.3±0.03
Internal
code
（P/N
1）
Note
CAPACITORS
Capacitance tolerance code is applied to
□
of part number.
【Temperature
Characteristic CH：CH/C0H】
Rated
voltage
25V
Part number 1
T2K096 CH100FP
T2K096 CH120KP
T2K096 CH150KP
T2K096 CH180KP
T2K096 CH220KP
T2K096 CH270KP
T2K096 CH330KP
T2K096 CH390KP
T2K096 CH470KP
T2K096 CH560KP
T2K096 CH680KP
T2K096 CH820KP
T2K096 CH101KP
Part number 2
Temp.
char.
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
Capacitance
〔pF〕
10
12
15
18
22
27
33
39
47
56
68
82
100
Capacitance
tolerance
±1pF
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
Q
600
640
700
760
840
940
1000
1000
1000
1000
1000
1000
1000
Thickness
〔mm〕
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
Internal
code
（P/N
1）
Note
Capacitance tolerance code is applied to
□
of part number.
●110TYPE 2
circuits type
【Temperature
Characteristic BJ：B/X5R】
・0.8mm
thickness A）
（
Rated
voltage
16V
10V
6.3V
Part number 1
E2K110 BJ105□A
L2K110 BJ474□A
L2K110 BJ105□A
J2K110 BJ225□A
Part number 2
Temp.
char.
X5R
B/X5R
X5R
X5R
Capacitance
〔μF〕
1
0.47
1
2.2
Capacitance
tolerance
±10, ±20
±10, ±20
±10, ±20
±10, ±20
tanδ
〔%〕
10
5
10
10
Thickness
〔mm〕
0.8±0.08
0.8±0.08
0.8±0.08
0.8±0.08
Soldering
R:Reflow
W:Wave
R
R
R
R
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
Soldering
R:Reflow
W:Wave
R
R
HALT
% Rated
voltage
150%
200%
150%
150%
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
200%
HALT
% Rated
voltage
150%
150%
Internal
code
（P/N
1）
Note
・0.6mm
thickness B）
（
Rated
voltage
50V
Part number 1
U2K110 BJ102□B
U2K110 BJ222□B
U2K110 BJ472□B
T2K110 BJ103□B
T2K110 BJ223□B
T2K110 BJ104□B
E2K110 BJ473□B
E2K110 BJ104□B
L2K110 BJ224□B
Part number 2
Temp.
char.
B/X5R*
1
B/X5R*
1
B/X5R*
1
B/X5R*
1
B/X5R*
1
B/X5R
B/X5R*
1
B/X5R*
1
B/X5R
Capacitance
〔μF〕
0.001
0.0022
0.0047
0.01
0.022
0.1
0.047
0.1
0.22
Capacitance
tolerance
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
tanδ
〔%〕
3.5
3.5
3.5
3.5
3.5
5
3.5
5
5
Thickness
〔mm〕
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
Internal
code
（P/N
1）
Note
25V
16V
10V
・0.5mm
thickness V）
（
Rated
voltage
10V
6.3V
Part number 1
L2K110 BJ105MV
J2K110 BJ105□V
Part number 2
Temp.
char.
X5R
X5R
Capacitance
〔μF〕
1
1
Capacitance
tolerance
±20
±10, ±20
tanδ
〔%〕
10
10
Thickness
〔mm〕
0.5±0.05
0.5±0.05
Internal
code
（P/N
1）
Note
Capacitance tolerance code is applied to
□
of part number.
*1 We may provide X7R for some itemes according to the individual specification.
＊
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc08_e-01
1
2
37
■
REPRESENTATIVE PART NUMBERS
【Temperature
Characteristic B7：X7R】
Rated
voltage
50V
Part number 1
U2K110 B7102□B
U2K110 B7222□B
U2K110 B7472□B
T2K110 B7103□B
T2K110 B7223□B
E2K110 B7473□B
E2K110 B7104□B
Part number 2
Temp.
char.
X7R
X7R
X7R
X7R
X7R
X7R
X7R
Capacitance
〔μF〕
0.001
0.0022
0.0047
0.01
0.022
0.047
0.1
Capacitance
tolerance
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
tanδ
〔%〕
3.5
3.5
3.5
3.5
3.5
3.5
5
Thickness
〔mm〕
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
25V
16V
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
Internal
code
（P/N
1）
Note
Capacitance tolerance code is applied to
□
of part number.
【Temperature
Characteristic CH：CH/C0H】
Rated
voltage
50V
Part number 1
U2K110 CH100FB
U2K110 CH120KB
U2K110 CH150KB
U2K110 CH180KB
U2K110 CH220KB
U2K110 CH270KB
U2K110 CH330KB
U2K110 CH390KB
U2K110 CH470KB
U2K110 CH560KB
U2K110 CH680KB
U2K110 CH820KB
U2K110 CH101KB
Part number 2
Temp.
char.
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
CH/C0H
Capacitance
〔pF〕
10
12
15
18
22
27
33
39
47
56
68
82
100
Capacitance
tolerance
±1pF
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
±10%
Q
600
640
700
760
840
940
1000
1000
1000
1000
1000
1000
1000
Thickness
〔mm〕
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
0.6±0.06
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
200%
Internal
code
（P/N
1）
Note
●212TYPE 2
circuits type
【Temperature
Characteristic BJ：B/X5R】
Rated
voltage
25V
10V
Part number 1
T2K212 BJ105□D
L2K212 BJ225MD
Part number 2
Temp.
char.
B/X5R
X5R
Capacitance
〔μF〕
1
2.2
Capacitance
tolerance
±10, ±20
±20
tanδ
〔%〕
5
10
Thickness
〔mm〕
0.85±0.1
0.85±0.1
Soldering
R:Reflow
W:Wave
R
R
HALT
% Rated
voltage
200%
150%
Internal
code
（P/N
1）
Note
Capacitance tolerance code is applied to
□
of part number.
●212TYPE 4
circuits type
【Temperature
Characteristic BJ：B/X5R】
Rated
voltage
25V
16V
10V
Part number 1
T4K212 BJ104□D
E4K212 BJ104□D
L4K212 BJ224□D
L4K212 BJ474□D
L4K212 BJ105□D
Part number 2
Temp.
char.
B/X5R
B/X5R*
1
B/X5R
B/X5R
X5R
Capacitance
〔μF〕
0.1
0.1
0.22
0.47
1
Capacitance
tolerance
±10, ±20
±10, ±20
±10, ±20
±10, ±20
±10, ±20
tanδ
〔%〕
5
5
5
5
10
Thickness
〔mm〕
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
0.85±0.1
Soldering
R:Reflow
W:Wave
R
R
R
R
R
HALT
% Rated
voltage
200%
200%
200%
200%
150%
Internal
code
（P/N
1）
Note
Capacitance tolerance code is applied to
□
of part number.
*1 We may provide X7R for some itemes according to the individual specification.
【Temperature
Characteristic B7：X7R】
Rated
voltage
16V
Part number 1
E4K212 B7104□D
Part number 2
Temp.
char.
X7R
Capacitance
〔μF〕
0.1
Capacitance
tolerance
±10, ±20
tanδ
〔%〕
5
Thickness
〔mm〕
0.85±0.1
Soldering
R:Reflow
W:Wave
R
HALT
% Rated
voltage
200%
Internal
code
（P/N
1）
Note
Capacitance tolerance code is applied to
□
of part number.
＊
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
38
1
2
mlcc08_e-01
■
ELECTRICAL CHARACTERISTICS
●Example
of Impedance ESR vs. Frequency characteristics
■
Taiyo Yuden multilayer ceramic capacitor
100000
10000
1000
100
10
1
0.1
0.01
0.1
1
10
100
1000 10000 100000
L2K096 BJ103MP
100000
10000
1000
100
10
1
0.1
0.01
0.1
1
10
100
1000 10000 100000
J2K096 BJ104MK
1000000
100000
10000
1000
100
10
1
0.1
0.01
1
10
100
1000
10000
T2K096 CH100FP
1000000
100000
10000
1000
100
10
1
0.1
0.01
1
10
100
1000
10000
T2K096 CH101KP
ESR
Impedance
ESR
Impedance
〔MHz〕
〔MHz〕
CAPACITORS
1000000
100000
10000
1000
100
10
1
0.1
0.01
T2K110 BJ103MB / T2K110 B7103MB
100000
10000
1000
100
10
1
0.1
0.01
E2K110 BJ104MB / E2K110 B7104MB
1000
100
10
1
L2K110 BJ105MA
10000
1000
100
10
1
J2K110 BJ225MA
0.1
0.01
0.001
0.1
0.1
0.01
1
10
100
1000 10000 100000
0.001
0.1
1
10
100
1000 10000 100000
0.001
0.1
1
10
100
1000 10000 100000
0.001
0.1
1
10
100
1000 10000 100000
10000
1000
100
10
1
0.1
0.01
0.001
0.1
1
L4K212 BJ105KD
10
100
1000 10000 100000
＊
This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
mlcc08_e-01
1
2
39
工业自动化与控制
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
