Conductive Polymer Aluminum
Solid Capacitors
Radial Lead Type
SEPF
series
Features
●
High voltage (35 V max.)
●
Large capacitance (1000 μF max.)
●
RoHS compliance, Halogen free
Specifications
Size code
Category temp. range
Rated voltage range
Nominal cap.range
Capacitance tolerance
DC leakage current
Dissipation factor (tan δ)
C55
C6
E7
–55
℃
to +105
℃
16 V to 35 V
22 μF to 180 μF
39 μF to 270 μF
82 μF to 560 μF
120 μF to 1000 μF
±20 % (120 Hz / +20
℃)
Please see the attached characteristics list
Please see the attached characteristics list
+105
℃
5000 h, rated voltage applied
Capacitance change
Within ±20 % of the initial value
Dissipation factor (tanδ)
DC leakage current
Damp heat
(Steady state)
≦
150 % of the initial limit
Within the initial limit
E12
F13
16 V to 32 V
22 μF to 150 μF
Endurance
+60
℃,
90 % to 95 % RH, 1000 h, No-applied voltage
Capacitance change
Within ±20 % of the initial value
Dissipation factor (tanδ)
DC leakage current
≦
150 % of the initial limit
Within the initial limit (after voltage processing)
Marking
Dimensions (not to scale)
Polarity marking (−)
Lot No.
Series code*
ød
⊕
15 min.
L max.
19 min.
⊖
øD
4 min.
R. voltage
(V)
R. capacitance
(μF)
Unit：½½
* Depends on the case size.
Size code
C55
C6
E7
E12
F13
øD±0.5
6.3
6.3
8.0
8.0
10.0
L max.
5.5
6.0
7.0
12.0
13.0
F±0.5
2.5
2.5
3.5
3.5
5.0
ød±0.05
0.45
0.5
0.5
*1
0.6
0.6
*1: 32SEPF68M : 0.6±0.05
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01-Nov-15
F
Safety and Legal Matters to Be Observed
Safety and Legal Matters to Be Observed
Product
specifications and applications
■
Please be advised that this product and product specifications are subject to change without notice for
improvement purposes. Therefore, please request and confirm the latest delivery specifications that explain
the specifications in detail before the final design, or purchase or use of the product, regardless of the
application. In addition, do not use this product in any way that deviates from the contents of the company's
delivery specifications.
■
Unless otherwise specified in this catalog or the delivery specifications, this product is intended for use in
general electronic equipment (AV products, home appliances, commercial equipment, office equipment,
information and communication equipment, etc.).
When this product is used for the following special cases, please separately discuss the delivery specifications
suited to each application with the company. These include applications requiring special quality and reliability,
wherein their failures or malfunctions may directly threaten human life or cause harm to the human body
(e.g.: space/aircraft equipment, transportation/traffic equipment, combustion equipment, medical equipment,
disaster prevention/crime prevention equipment, safety equipment, etc.).
■
Please ensure safety through protection circuits, redundant circuits, etc., in the customer's system design so
that a defect in our company's product will not endanger human life or cause other serious damage.
■
This catalog shows the quality and performance of individual parts. The durability of parts varies depending on
the usage environment and conditions. Therefore, please ensure to evaluate and confirm the state of each part
after it has been mounted in your product in the actual operating environment before use.
If you have any doubts about the safety of this product, then please notify us immediately, and be sure to conduct
a technical review including the above protection circuits and redundant circuits at your company.
Safety
design and product evaluation
Laws
/ Regulations / Intellectual property
■
The transportation of dangerous goods as designated by UN numbers, UN classifications, etc., does not apply
to this product. In addition, when exporting products, product specifications, and technical information described
in this catalog, please comply with the laws and regulations of the countries to which the products are exported,
especially those concerning security export control.
■
Each model of this product complies with the RoHS Directive (Restriction of the use of hazardous substances in
electrical and electronic equipment) (2011/65/EU and (EU) 2015/863). The date of compliance with the RoHS
Directive and REACH Regulation varies depending on the product model.
Further, if you are using product models in stock and are not sure whether or not they comply with the RoHS
Directive or REACH Regulation, please contact us by selecting "Sales Inquiry" from the inquiry form.
■
During the manufacturing process of this product and any of its components and materials to be used,
Panasonic does not intentionally use ozone-depleting substances stipulated in the Montreal Protocol and
specific bromine-based flame retardants such as PBBs (Poly-Brominated Biphenyls) / PBDEs (Poly-Brominated
Diphenyl Ethers). In addition, the materials used in this product are all listed as existing chemical substances
based on the Act on the Regulation of Manufacture and Evaluation of Chemical Substances.
■
With regard to the disposal of this product, please confirm the disposal method in each country and region
where it is incorporated into your company's product and used.
■
The technical information contained in this catalog is intended to show only typical operation and application
circuit examples of this product. This catalog does not guarantee that such information does not infringe upon
the intellectual property rights of Panasonic or any third party, nor imply that the license of such rights has been
granted.
Panasonic Industry will assume no liability whatsoever if the use of our company's
products deviates from the contents of this catalog or does not comply with the
precautions. Please be advised of these restrictions.
30-Jun-23
嵌入式系统
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
