Digital Fiber Amplifier
E3X-DA-N
CSM_E3X-DA-N_DS_E_7_2
Note: Manufacturing of the E3X-DA@TW Series was discontinued at the end of March 2012.
Manufacture of the E3X-DA11-N/DA41-N/DA11D/DA6/DA8/DA6D will be discontinued
in March 2017.
The Ultimate Fiber Amplifier for
Maximum Ease of Use and High
Performance
Be sure to read
Safety Precautions
on page 23.
UL991*
* UL certification including UL 991 testing and evaluation
•
Applicable standards: UL 3121-1
•
Additional application testing and evaluations standards: UL 991 and SEMI S2-0200S
Features
Models with New Connector System
Reduces Wiring, Saves Space, and Makes
Maintenance Easier
First in the Industry Patent Pending
In Amplifiers with wire-saving connectors, the power supply is
distributed to 1-conductor slave connectors through a 3-
conductor master connector. This design has three major
advantages.
1. Wiring time is significantly reduced.
2. Relay connectors are unnecessary, so wiring takes up less
space and costs are reduced.
3. Storage and maintenance are simpler because it isn't
necessary to distinguish between master connector and
slave connectors on the Amplifier.
Super Digital Display with Auto Power
Control (APC) Circuit
First in the Industry
The passage of time causes the intensity of the Sensor's light-
emitting LED elements to deteriorate, which may make stable
detection impossible.
The E3X-DA-N is the first series of Fiber Sensors to use an
Auto Power Control (APC) circuit. This achieves strict
detection by eliminating fluctuation in the digital value and is
ideal for subtle detection such as stable detection of liquid-
crystal glass.
Incident level
3000
Simplified Connector Design
Up to 16 Amplifiers can
be connected.
Previous Digital
Fiber Amplifiers
Threshold
Unstable detection
Time
Incident level
3000
Optical
communi-
cations
E3X-DA-N Series
Threshold
Stable detection
Power
supply pin
Slave connector
Master connector
Time
1
E3X-DA-N
Power Consumption Reduced by As Much
As 70%
Power consumption is
reduced by as much as 70%
from 1800 mW to 600 mW
(when the digital display is
OFF).
Digital Display Can Be Turned OFF or
Dimmed during Operation
Eco-mode
When the digital display is viewed infrequently during
operation, current consumption can be reduced by dimming
the display or turning it OFF entirely.
(Eco-mode can be set from the Mobile Console only.)
1800 mW
600 mW
Previous model
This eco-label is displayed on
products that meet
environmental standards
established by OMRON.
E3X-DA-N
(with digital display OFF)
New Generation of Mobile Consoles the Size of Cellular Phones.
Further Developing the Ultimate Power of Fiber Amplifiers.
Remote Setting and Adjustment
Perform settings, teaching, and fine adjustments at the
end of the Fiber Unit.
Previously, settings and
teaching could be performed
only on the Amplifier. Now,
however, using a Mobile
Console enables these
operations at the end of the fiber.
Strict adjustments can be made
while checking the workpiece
position.
With group teaching, teach multiple amplifiers
simultaneously.
The tedious teaching that had
to be performed separately for
each Amplifier can now be
performed for several
Amplifiers at once using the
Mobile Console.
Group teaching
Eliminate inconsistency by using group zero reset.
The group zero reset function
can simultaneously reset the
digital displays of multiple
Amplifiers to 0. This function is
useful to minimize variation
between Amplifier values.
Display the light intensity and threshold at the same time.
New
Concept
Patent Pending
Flash the Sensor head and display the amplifier channels
during operation.
Function indicator
section
Channel setting
section
Light intensity monitor
Channel 5
Even if the Amplifier and Sensor
head are separated during
operation, it is still possible to
flash the Sensor head and
display the amplifier channels.
Threshold
Channel 4
Channel 3
Channel 2
Channel 1
Operation keys
Battery monitor
Head
Optical communications
2
E3X-DA-N
Ordering Information
Amplifiers
Pre-wired Amplifiers
Type
Standard models
Monitor-output models
Mark-detecting models (blue LED)
Mark-detecting models (green LED)
Infrared models
Differential-output model
*1
Appearance
Control output
ON/OFF output
•
ON/OFF output
•
Monitor output
Model
NPN output
E3X-DA11-N 2M
*2
E3X-DA21-N 2M
E3X-DAB11-N 2M
E3X-DAG11-N 2M
E3X-DAH11-N 2M
E3X-DA11D 2M
*2
PNP output
E3X-DA41-N 2M
*2
E3X-DA51-N 2M
E3X-DAB41-N 2M
E3X-DAG41-N 2M
E3X-DAH41-N 2M
---
Water-resistant models
ON/OFF output
E3X-DA11V 2M
E3X-DA41V 2M
Twin-output models
E3X-DA11TW 2M
*2
E3X-DA41TW 2M
*2
*1. For details, refer to page 6.
*2. Manufacturing of the E3X-DA@TW Series was discontinued at the end of March 2012.
Manufacture of the E3X-DA11-N/DA41-N/DA11D will be discontinued in March 2017.
Amplifiers with Standard Connectors
Type
Standard models
Monitor-output models
Mark-detecting models
(Blue LED)
Mark-detecting models
(Green LED)
Infrared models
Differential-output
model
*1
Appearance
Applicable Connector
(order separately)
Master
Slave
Master
Slave
Master
Slave
Master
Slave
Master
Slave
Master
Slave
E3X-CN11
E3X-CN12
E3X-CN21
E3X-CN22
E3X-CN11
E3X-CN12
E3X-CN11
E3X-CN12
E3X-CN11
E3X-CN12
E3X-CN11
E3X-CN12
Control output
ON/OFF output
•
ON/OFF output
•
Monitor output
Model
NPN output
E3X-DA6
*2
E3X-DA7
E3X-DAB6
E3X-DAG6
E3X-DAH6
E3X-DA6D
*2
PNP output
E3X-DA8
*2
E3X-DA9
E3X-DAB8
E3X-DAG8
E3X-DAH8
---
Water-resistant models
(M8 connector)
XS3F-M421-40@-A
XS3F-M422-40@-A
ON/OFF output
E3X-DA14V
E3X-DA44V
Master
Twin-output models
Slave
E3X-CN21
E3X-DA6TW
*2
E3X-CN22
E3X-DA8TW
*2
*1. For details, refer to page 6.
*2. Manufacturing of the E3X-DA@TW Series was discontinued at the end of March 2012.
Manufacture of the E3X-DA6/DA8/DA6D will be discontinued in March 2017.
3
E3X-DA-N
Amplifier Connectors (Order Separately)
Note: Seal provided as accessory.
Type
Master
Connector
2m
Slave
Connector
1
2
E3X-CN12
E3X-CN22
Appearance
Cable length No. of conductors
3
4
Model
E3X-CN11
E3X-CN21
Combining Amplifiers and Connectors (Basically Amplifiers and Connectors are sold separately.)
Refer to the following tables when placing an order.
Amplifiers
NPN
E3X-DA6
E3X-DAB6
Mark-detecting models
E3X-DAG6
Infrared models
E3X-DAH6
Differential-output model E3X-DA6D
Monitor-output models E3X-DA7
Twin-output models
E3X-DA6TW
Type
Standard models
PNP
E3X-DA8
E3X-DAB8
E3X-DAG8
E3X-DAH8
---
E3X-DA9
E3X-DA8TW
Applicable Connectors (Order Separately)
Master Connector
Slave Connector
+
E3X-CN11
E3X-CN12
E3X-CN21
E3X-CN22
When Using 5 Amplifiers
Amplifiers (5 Units)
+
1 Master Connector
4 Slave Connectors
Sensor I/O Connectors (Order Separately)
Size
Cable specifications
Appearance
2m
M8
Standard cable
Cable type
Model
XS3F-M421-402-A
4-wire
connection
XS3F-M421-405-A
XS3F-M422-402-A
XS3F-M422-405-A
Straight
connector
L-shaped
connector
5m
2m
5m
4
E3X-DA-N
Mobile Console (Order Separately)
Appearance
Model
Remarks
Mobile Console with head, cable, and AC
(model number of set)
adapter provided as accessories.
E3X-MC11
Power supply method: chargeable battery
E3X-MC11-C1
Mobile Console
E3X-MC11-H1
Head
E39-Z12-1
Cable (1.5 m)
Accessories (Order Separately)
Mounting Brackets
Appearance
Applicable model
E3X-DA-N Series
Model
E39-L143
1
E3X-DA@V
E39-L148
---
Quantity
Remarks
Operating Instructions Sticker
Model
E39-Y1
Remarks
Attach near the Sensor.
➜Refer
to page 25.
End Plate
Appearance
Model
PFP-M
Quantity
1
* When using a Through-beam Fiber Unit, order one Bracket for the Receiver and one for the Emitter.
5
FPGA/CPLD
京公网安备 11010802033920号
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved
电子工程世界
